DG-M1Q 2017 Smart Home 960P 2.8mm
http://adamwesterberg.se/blog/cheap-chinese-camera-teardown
http://robert.penz.name/1348/hikam-a7-iot-security-at-its-worst/
https://4pda.ru/forum/index.php?showtopic=681058
Test Camera via RTSP & VLC
VLC -> Media -> Open Network Stream
rtsp://admin:[email protected]/onvif1 (Stream 1) rtsp://admin:[email protected]/onvif2 (Stream 2 ????)
See the below link
http://www.gokemicro.com/GK7102.html
CPU core: ARM1176 @ 600MHZ, 16KB I-Cache, 16KB D-Cache
40nm process, BGA228 package (11 * 11)
High integration: integrated 512Mb DDR2, Ethernet PHY, Audio Codec, MCU, eFuse
Excellent ISP performance
- Image processing: 3A, WDR, 3D noise reduction, gamma conversion, RGB filtering, dead pixel correction, black level correction, lens survey
- Intelligent analysis: motion detection, face detection, peripheral prevention, legacy Object identification
Encoding Performance
- Video: Supports H.264 BP / MP / HP, MJPEG / JPEG
- Audio: Supports G.711 / G.726 / ADPCM / MP3
Maximum support 4-way encoding
processing capability - 960P @ 30fps + VGA @ 30fps + QCIF @ 30fps + 960P JPEG @ 1fps
- 720P @ 30fps + VGA @ 30fps + QCIF @ 30fps + 720P JPEG @ 1fps
Audio interface
- through the I2S interface, Audio Codec built-in external optional two
- external, can support two-channel stereo
Video
interface - support 8/10/12 bit RGB Bayer input
- support 1 CVBS output
Peripheral Interface
- 2.0 the USB Host / Device X1
- the ETH the MAC + a PHY the X1
- X3 the UART, the SPI an X2
- the I2C an X2, X4 the PWM
- the I2S an X2, X1 SDIO2.0, the IrDA X1
Low power: 800mw (including DDR), true standby function: system standby current 60uA
Fast wake-up: support for infrared and key to wake up
AES, DES, 3DES security engine
Notes:
Firmware: - 22.0.0.12
Initial Firmware
Starting Nmap 7.01 ( https://nmap.org ) at 2017-03-28 18:23 EDT
Nmap scan report for 192.168.1.13
Host is up (0.0096s latency).
Not shown: 998 closed ports
PORT STATE SERVICE
554/tcp open rtsp
5000/tcp open upnp
Firmware: - 22.0.0.16
Starting Nmap 7.01 ( https://nmap.org ) at 2017-03-28 18:23 EDT
Nmap scan report for 192.168.1.13
Host is up (0.0088s latency).
Not shown: 997 closed ports
PORT STATE SERVICE
23/tcp open telnet
554/tcp open rtsp
5000/tcp open upnp
telnet 192.168.1.13
goke login: root
NO PASSWORD
dmesg
# dmesg
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Linux version 3.4.43-gk (user15@ubuntu) (gcc version 4.6.1 (crosstool-NG 1.18.0) ) #56 PREEMPT Fri Sep 29 00:24:56 PDT 2006
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Goke GK7102 RB_JXH42 board V2.00
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] AHB: 0x90000000 0xf2000000 -- 0x1000000
[ 0.000000] APB: 0xa0000000 0xf3000000 -- 0x1000000
[ 0.000000] PPM: 0xc0000000 0xc0000000 -- 0x200000
[ 0.000000] BSB: 0xc2500000 0xf5000000 -- 0x200000
[ 0.000000] DSP: 0xc2700000 0xf6000000 -- 0x1900000
[ 0.000000] hal version = 20151223
[ 0.000000] On node 0 totalpages: 8960
[ 0.000000] free_area_init_node: node 0, pgdat 8045c430, node_mem_map 80493000
[ 0.000000] Normal zone: 70 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8890 pages, LIFO batch:1
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8890
[ 0.000000] Kernel command line: console=ttySGK0,115200 noinitrd mem=35M rw mtdparts=gk7101_flash:256K(boot),64K(bootenv),2560K(kernel),7168K(rootfs),1024K(rom),5312K(APP) rootfstype=squashfs root=/dev/mtdblock3 init=linuxrc ip=192.168.1.229:192.168.1.225:192.168.1.1:255.255.255.0:"gk7101":eth0 mac=3C:97:0E:22:E1:14 phytype=0
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Memory: 35MB = 35MB total
[ 0.000000] Memory: 30760k/30760k available, 5080k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xff600000 - 0xffe00000 ( 8 MB)
[ 0.000000] vmalloc : 0x82800000 - 0xff000000 (1992 MB)
[ 0.000000] lowmem : 0x80000000 - 0x82300000 ( 35 MB)
[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ 0.000000] .text : 0x80008000 - 0x80413000 (4140 kB)
[ 0.000000] .init : 0x80413000 - 0x80433000 ( 128 kB)
[ 0.000000] .data : 0x80434000 - 0x8045cd00 ( 164 kB)
[ 0.000000] .bss : 0x8045cd24 - 0x8048edf8 ( 201 kB)
[ 0.000000] NR_IRQS:128
[ 0.000000] >> gk7101 init irq vic1...
[ 0.000000] >> gk7101 init irq vic2...
[ 0.000000] gk7101 init vic...
[ 0.000000] mach gk7101 init timer...
[ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [ttySGK0] enabled
[ 0.010000] Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032)
[ 0.070000] pid_max: default: 32768 minimum: 301
[ 0.070000] Mount-cache hash table entries: 512
[ 0.080000] CPU: Testing write buffer coherency: ok
[ 0.090000] Setting up static identity map for 0xc0542e30 - 0xc0542e68
[ 0.100000] NET: Registered protocol family 16
[ 0.110000] gk7101 init timer...
[ 0.110000] Init HW timer for DSP communication
[ 0.120000] gk7101 init gpio...
[ 0.120000] gpiochip_add: registered GPIOs 0 to 63 on device: gk7101-gpio0
[ 0.130000] gpio map init...
[ 0.130000] create proc dir
[ 0.140000] gk7101 register devices 8
[ 0.140000] gk7101 register I2C
[ 0.280000] bio: create slab <bio-0> at 0
[ 0.290000] spi spi.0: gk7101 SPI Controller 0 created
[ 0.290000] spi spi.0: master is unqueued, this is deprecated
[ 0.300000] usbcore: registered new interface driver usbfs
[ 0.310000] usbcore: registered new interface driver hub
[ 0.310000] usbcore: registered new device driver usb
[ 0.320000] i2c regbase: 0xf3003000
[ 0.320000] i2c i2c.0: i2c irq:registers 9
[ 0.330000] i2c i2c.0: GK7101 I2C[0] adapter[i2c-0] probed!
[ 0.340000] FS-Cache: Loaded
[ 0.340000] CacheFiles: Loaded
[ 0.350000] cfg80211: Calling CRDA to update world regulatory domain
[ 0.360000] gk7101-sd gk7101-sd.0: Slot0 req_size=0x00010000, segs=16, seg_size=0x00010000
[ 0.390000] gk7101-sd gk7101-sd.0: GK7101 SD/MMC[0] has 1 slots @ 46000000Hz, [0x09e130b0:0x00000000]
[ 0.400000] NET: Registered protocol family 2
[ 0.400000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.410000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.420000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.430000] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.440000] TCP: reno registered
[ 0.440000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.450000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.450000] NET: Registered protocol family 1
[ 0.460000] RPC: Registered named UNIX socket transport module.
[ 0.470000] RPC: Registered udp transport module.
[ 0.470000] RPC: Registered tcp transport module.
[ 0.480000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.480000] mdma init...
[ 0.490000] mdma request irq: 54
[ 0.500000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.500000] NFS: Registering the id_resolver key type
[ 0.510000] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.520000] msgmni has been set to 60
[ 0.530000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.540000] io scheduler noop registered
[ 0.540000] io scheduler deadline registered
[ 0.550000] io scheduler cfq registered (default)
[ 0.550000] Serial: gk7101_uart driver
[ 0.550000] serial_gk7101_probe: entry
[ 0.550000] uart.0: ttySGK0 at MMIO 0xa0005000 (irq = 31) is a gk7101uart
[ 0.560000] serial_gk7101_probe: succeed!
[ 0.560000] serial_gk7101_probe: entry
[ 0.560000] uart.1: ttySGK1 at MMIO 0xa001f000 (irq = 15) is a gk7101uart
[ 0.570000] serial_gk7101_probe: succeed!
[ 0.570000] serial_gk7101_probe: entry
[ 0.570000] uart.2: ttySGK2 at MMIO 0xa001e000 (irq = 27) is a gk7101uart
[ 0.580000] serial_gk7101_probe: succeed!
[ 0.590000] brd: module loaded
[ 0.590000] loop: module loaded
[ 0.600000] adc initialized (10:11)
[ 0.600000] slram: not enough parameters.
[ 0.610000] speed_mod is 0
[ 0.610000] support 4X mode read:0xe520f1ff
[ 0.620000] gk7101_flash gk7101_flash.0: MX25L12845 (16384 Kbytes)
[ 0.620000] 6 cmdlinepart partitions found on MTD device gk7101_flash
[ 0.630000] Creating 6 MTD partitions on "gk7101_flash":
[ 0.640000] 0x000000000000-0x000000040000 : "boot"
[ 0.640000] 0x000000040000-0x000000050000 : "bootenv"
[ 0.650000] 0x000000050000-0x0000002d0000 : "kernel"
[ 0.660000] 0x0000002d0000-0x0000009d0000 : "rootfs"
[ 0.660000] 0x0000009d0000-0x000000ad0000 : "rom"
[ 0.670000] 0x000000ad0000-0x000001000000 : "APP"
[ 0.680000] GKETH_init
[ 0.680000] [GKETH_drv_probe] eth_base = 0xf200e000
[ 0.690000] mii id = 0
[ 0.690000] ###### PHY Reset.1.0.2
[ 0.810000] mdiobus_register: PHY[0] whose id 0x00000000
[ 0.810000] goke MII Bus: probed
[ 0.820000] gk7101-eth gk7101-eth.0: MAC Address[3e:97:0e:22:e1:14].
[ 0.830000] usbcore: registered new interface driver cdc_wdm
[ 0.830000] usbcore: registered new interface driver libusual
[ 0.840000] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 0.850000] musb phy Begin initial sequence ...
[ 1.090000] gk7101 musb init end...
[ 1.100000] musb-hdrc: ConfigData=0x03 (UTMI-16, SoftConn)
[ 1.100000] musb-hdrc: MHDRC RTL version 2.0
[ 1.100000] musb-hdrc musb-hdrc: MUSB HDRC host driver
[ 1.100000] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 1
[ 1.110000] vm : ffde0000, phy : c21a0000
[ 1.110000] dma_buf alloc ok!
[ 1.120000] hub 1-0:1.0: USB hub found
[ 1.120000] hub 1-0:1.0: 1 port detected
[ 1.130000] musb-hdrc musb-hdrc: USB Host mode controller at f0006000 using PIO, IRQ 26
[ 1.140000] platform add gk7101 musb...
[ 1.140000] mousedev: PS/2 mouse device common for all mice
[ 1.150000] input: GKInput as /devices/virtual/input/input0
[ 1.160000] evbug: Connected device: input0 (GKInput at gk7101/input0)
[ 1.160000] Protocol NEC[0]
[ 1.160000] ir request irq: 62
[ 1.160000] IR Host Controller probed!
[ 1.170000] gk7101 rtc init...
[ 1.170000] rtc base: 0xf2080000
[ 1.170000] os read tm: t=0
[ 1.180000] gk7101-rtc: dev (254:0)
[ 1.180000] gk7101-rtc gk7101-rtc: rtc core: registered gk7101-rtc as rtc0
[ 1.180000] i2c /dev entries driver
[ 1.190000] gk7101_wdt: GK7101 Watchdog Timer, (c) 2014 Goke Microelectronics
[ 1.200000] [gk7101_wdt_init]: init
[ 1.200000] [gk7101_wdt_probe]: probe
[ 1.200000] [gk7101_wdt_probe]: probe mapped wdt_base=f3006000
[ 1.210000] watchdog inactive, reset disabled, irq disabled
[ 1.220000] IPv4 over IPv4 tunneling driver
[ 1.220000] gre: GRE over IPv4 demultiplexor driver
[ 1.230000] ip_gre: GRE over IPv4 tunneling driver
[ 1.240000] TCP: cubic registered
[ 1.240000] Initializing XFRM netlink socket
[ 1.250000] NET: Registered protocol family 10
[ 1.260000] IPv6 over IPv4 tunneling driver
[ 1.260000] NET: Registered protocol family 17
[ 1.270000] NET: Registered protocol family 15
[ 1.270000] lib80211: common routines for IEEE802.11 drivers
[ 1.280000] lib80211_crypt: registered algorithm 'NULL'
[ 1.280000] Registering the dns_resolver key type
[ 1.280000] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 1.290000] os read tm: t=0
[ 1.300000] gk7101-rtc gk7101-rtc: setting system clock to 1970-01-01 00:00:00 UTC (0)
[ 1.310000] net eth0: ###### GKETH_start_hw
[ 1.320000] net eth0: ###### GKETH_phy_start_aneg...
[ 1.320000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1.590000] usb 1-1: new high-speed USB device number 2 using musb-hdrc
[ 3.350000] IP-Config: Complete:
[ 3.350000] device=eth0, addr=192.168.1.229, mask=255.255.255.0, gw=192.168.1.1
[ 3.360000] host="gk7101", domain=, nis-domain=(none)
[ 3.360000] bootserver=192.168.1.225, rootserver=192.168.1.225, rootpath=
[ 3.380000] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[ 3.390000] Freeing init memory: 128K
[ 8.510000] gk_vi_init
[ 8.510000] request_irq...24 ok-- video_sync
[ 8.510000] request_irq...59 ok-- video_frame_last_pixel
[ 8.530000] request_irq...61 ok-- video_frame
[ 8.530000] gk7101_is_valid_gpio_irq...
[ 8.730000] crypto initialized (10:11)
Media driver version (gcc version 4.6.1 (crosstool-NG 1.18.0) (uClibc)) v1.1.2 #svn r8850 Wed Jul 6 17:44:23 CST 2016
[ 8.960000] Init software HR timer for DSP communication
[ 11.730000] rtusb init rt2870 --->
[ 11.730000]
[ 11.730000]
[ 11.730000] === pAd = 82a82000, size = 1581168 ===
[ 11.730000]
[ 11.760000] <-- RTMPAllocTxRxRingMemory, Status=0
[ 11.760000] <-- RTMPAllocAdapterBlock, Status=0
[ 11.780000] RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x8
[ 11.780000] RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x4
[ 11.790000] RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x5
[ 11.800000] RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x6
[ 11.810000] RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x7
[ 11.810000] RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x9
[ 11.820000] STA Driver version-JEDI.MP1.mt7601u.v1.5
[ 11.830000] Compile time-Jul 26 2006,19:39:19
[ 11.830000] ==>WaitForAsicReady MAC_CSR0=0x76010500
[ 11.840000] ==>WaitForAsicReady MAC_CSR0=0x76010500
[ 11.850000] NVM is EFUSE
[ 11.850000] Endpoint(8) is for In-band Command
[ 11.850000] Endpoint(4) is for WMM0 AC0
[ 11.860000] Endpoint(5) is for WMM0 AC1
[ 11.860000] Endpoint(6) is for WMM0 AC2
[ 11.880000] Endpoint(7) is for WMM0 AC3
[ 11.880000] Endpoint(9) is for WMM1 AC0
[ 11.880000] Endpoint(84) is for Data-In
[ 11.890000] Endpoint(85) is for Command Rsp
[ 11.900000] 80211> RFICType = 3
[ 11.900000] NumOfChan ===> 58
[ 11.900000] 80211> Number of channel = 0x44
[ 11.910000] 80211> Number of rate = 12
[ 11.910000] 80211> CurTxPower = 0 dBm
[ 11.920000] 80211> TxStream = 0
[ 11.920000] crda> requlation requestion by core: 00
[ 11.940000] 80211> CFG80211_Register
[ 11.940000] MSC msc_proc_create: 82a82000
[ 11.970000] usbcore: registered new interface driver rt2870
[ 16.640000] db_max 0x2379b664, db_step 0x0
[ 16.640000] sensor board reset...
[ 16.970000] sensor board reset...
[ 17.370000] write: addr 0x3640 val 0x3
[ 20.570000] [sc1135_set_video_mode 1188] 1
[ 21.020000] ================> UP : RTMP_SEM_EVENT_WAIT(STA)
[ 21.020000] 1. LDO_CTR0(6c) = a6478d, PMU_OCLEVEL 6
[ 21.030000] 2. LDO_CTR0(6c) = a6478d, PMU_OCLEVEL 6
[ 21.040000] ==>WaitForAsicReady MAC_CSR0=0x76010500
[ 21.050000] RTMP_TimerListAdd: add timer obj 82baa764!
[ 21.060000] RTMP_TimerListAdd: add timer obj 82baa794!
[ 21.070000] RTMP_TimerListAdd: add timer obj 82baa7c4!
[ 21.070000] RTMP_TimerListAdd: add timer obj 82baa734!
[ 21.080000] RTMP_TimerListAdd: add timer obj 82baa6a4!
[ 21.090000] RTMP_TimerListAdd: add timer obj 82baa6d4!
[ 21.100000] RTMP_TimerListAdd: add timer obj 82b3ecdc!
[ 21.110000] RTMP_TimerListAdd: add timer obj 82b2b5d0!
[ 21.110000] RTMP_TimerListAdd: add timer obj 82b2b604!
[ 21.120000] RTMP_TimerListAdd: add timer obj 82b3ed7c!
[ 21.130000] RTMP_TimerListAdd: add timer obj 82b2df80!
[ 21.130000] RTMP_TimerListAdd: add timer obj 82b2d7c0!
[ 21.150000] RTMP_TimerListAdd: add timer obj 82b2df4c!
[ 21.150000] RTMP_TimerListAdd: add timer obj 82b2e29c!
[ 21.160000] RTMP_TimerListAdd: add timer obj 82b2dfb4!
[ 21.170000] RTMP_TimerListAdd: add timer obj 82b2dfe8!
[ 21.170000] RTMP_TimerListAdd: add timer obj 82b2e01c!
[ 21.180000] RTMP_TimerListAdd: add timer obj 82a8640c!
[ 21.190000] RTMP_TimerListAdd: add timer obj 82a85c4c!
[ 21.190000] RTMP_TimerListAdd: add timer obj 82a863d8!
[ 21.200000] RTMP_TimerListAdd: add timer obj 82a86728!
[ 21.210000] RTMP_TimerListAdd: add timer obj 82a8665c!
[ 21.210000] RTMP_TimerListAdd: add timer obj 82abd684!
[ 21.220000] RTMP_TimerListAdd: add timer obj 82abcec4!
[ 21.230000] RTMP_TimerListAdd: add timer obj 82abd650!
[ 21.230000] RTMP_TimerListAdd: add timer obj 82abd9a0!
[ 21.240000] RTMP_TimerListAdd: add timer obj 82abd6b8!
[ 21.250000] RTMP_TimerListAdd: add timer obj 82abd6ec!
[ 21.260000] RTMP_TimerListAdd: add timer obj 82abd720!
[ 21.260000] RTMP_TimerListAdd: add timer obj 82b3ec7c!
[ 21.270000] RTMP_TimerListAdd: add timer obj 82b3ed4c!
[ 21.280000] RTMP_TimerListAdd: add timer obj 82c01d20!
[ 21.290000] RTMP_TimerListAdd: add timer obj 82c01d50!
[ 21.290000] RTMP_TimerListAdd: add timer obj 82c01d80!
[ 21.300000] RTMP_TimerListAdd: add timer obj 82c01db0!
[ 21.310000] RTMP_TimerListAdd: add timer obj 82c01de0!
[ 21.320000] RTMP_TimerListAdd: add timer obj 82c01e14!
[ 21.330000] RTMP_TimerListAdd: add timer obj 82baa704!
[ 21.330000] RTMP_TimerListAdd: add timer obj 82b2a5ec!
[ 21.340000] RTMP_TimerListAdd: add timer obj 82b2a5bc!
[ 21.350000] RTMP_TimerListAdd: add timer obj 82b2a58c!
[ 21.360000] RTMP_TimerListAdd: add timer obj 82b3ecac!
[ 21.370000] P2pGroupTabInit .
[ 21.370000] P2pScanChannelDefault <=== count = 3, Channels are 1, 6,11 separately
[ 21.380000] P2pCfgInit::
[ 21.390000] ==>WaitForAsicReady MAC_CSR0=0x76010500
[ 21.870000] cfg_mode=9
[ 21.870000] cfg_mode=9
[ 21.870000] wmode_band_equal(): Band Equal!
[ 21.880000] Key1Str is Invalid key length(0) or Type(0)
[ 21.890000] Key2Str is Invalid key length(0) or Type(0)
[ 21.910000] Key3Str is Invalid key length(0) or Type(0)
[ 21.910000] Key4Str is Invalid key length(0) or Type(0)
[ 21.920000] ###### Force at HT20 (BW_20) mode !!! ########
[ 21.940000] 1. Phy Mode = 14
[ 21.940000] 2. Phy Mode = 14
[ 21.950000] NVM is Efuse and its size =1d[1e0-1fc]
[ 21.960000] ERROR!!! MT7601 E2PROM: WRONG VERSION 0xc, should be 9
[ 22.000000] 3. Phy Mode = 14
[ 22.000000] AntCfgInit: primary/secondary ant 0/1
[ 22.220000] ---> InitFrequencyCalibration
[ 22.220000] InitFrequencyCalibrationMode:Unknow mode = 3
[ 22.230000] InitFrequencyCalibration: frequency offset in the EEPROM = 125(0x7d)
[ 22.240000] <--- InitFrequencyCalibration
[ 22.250000] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 22.270000] MCS Set = ff 00 00 00 01
[ 22.290000] <==== STA : rt28xx_init, Status=0
[ 22.300000] 80211> re-init bands...
[ 22.330000] 80211> RFICType = 1
[ 22.330000] NumOfChan ===> 14
[ 22.330000] 80211> Number of channel = 0x44
[ 22.360000] 80211> Number of rate = 12
[ 22.360000] 80211> CurTxPower = 0 dBm
[ 22.360000] 80211> TxStream = 1
[ 22.390000] 0x1300 = 00064300
[ 22.390000] RTMPDrvOpen(1):Check if PDMA is idle!
[ 22.410000] RTMPDrvOpen(2):Check if PDMA is idle!
[ 22.410000] <================ UP : RTMP_SEM_EVENT_UP(STA)
[ 22.500000] net eth0: ###### GKETH_phy_stop
[ 22.570000] net eth0: ###### GKETH_start_hw
[ 22.570000] net eth0: ###### GKETH_phy_start_aneg...
[ 22.580000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.570000] fps is 25, support max shutter time is 20480000 curr shutter_time 0
[ 25.730000] mirror_patter 0
[ 25.930000] -----------------zhangbin002-------------
[ 26.130000] fps is 15, support max shutter time is 34133333 curr shutter_time 20480000
[ 26.450000] win_height:0 win_width:0
[ 26.450000] win_height:0 win_width:0
[ 26.710000] ==>rt_ioctl_siwfreq::SIOCSIWFREQ(Channel=1)
[ 26.770000] PeerBeaconAtJoinAction(): HT-CtrlChannel=1, CentralChannel=>1
[ 26.790000] PeerBeaconAtJoinAction(): Set CentralChannel=1
[ 27.470000] delay mod0 ret 41
[ 27.470000] delay mod0 ret 45
[ 27.560000] RTMP_TimerListAdd: add timer obj 82bfa518!
[ 28.040000] delay mod0 ret 12
[ 28.440000] delay mod0 ret 12
[ 28.840000] delay mod0 ret 11
[ 29.240000] delay mod0 ret 12
[ 29.640000] delay mod0 ret 11
[ 30.040000] delay mod0 ret 13
[ 30.450000] delay mod0 ret 21
[ 30.840000] delay mod0 ret 19
[ 31.400000] Rcv Wcid(1) AddBAReq
[ 31.420000] Start Seq = 00000000
[ 31.420000] RTMP_TimerListAdd: add timer obj 82bfc528!
[ 31.840000] Rcv Wcid(1) AddBAReq
[ 31.860000] Start Seq = 00000000
[ 31.860000] RTMP_TimerListAdd: add timer obj 82bfc57c!
[ 32.570000] wlan0: no IPv6 routers present
[ 33.450000] RTMP_TimerListAdd: add timer obj 82bfa558!
Main program
/npc/npc
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent