This is a floppy disk controller board for my homebrew 65C02 based system
Make sure to program the ATF16V8 with the .JED file contained within the PLD folder before soldering to the board
Component | Designator | QTY | Link |
---|---|---|---|
82077AA or PC8477B | U1 | 1 | eBay |
ATF16V8 PLD | U2 | 1 | Mouser |
PLCC-68 Socket | U1 | 1 | Mouser |
20-pin DIP socket | U2 | 1 | Mouser |
40-Pin IDC Header | CON1 | 1 | Mouser |
4.7nF Ceramic Capacitor (Not needed for PC8477) | C1 | 1 | Mouser |
0.1uF Ceramic Capaictor | C2-7 | 6 | Mouser |
100uF Electrolytic Capacitor | C8 | 1 | Mouser |
Resistor network - Bussed, 1K 6 pin | RN1 | 1 | Mouser |
24MHz Can Oscillator | X1 | 1 | Mouser |