kittn / generator-kittn Goto Github PK
View Code? Open in Web Editor NEWThe Yeoman Kittn Generator
Home Page: http://kittn.de
License: MIT License
The Yeoman Kittn Generator
Home Page: http://kittn.de
License: MIT License
Following the Bugs:
src/.system/
and src/.system/en
folder (would be copied with npm run init
task)craftscripts
GET http://localhost:3000/__webpack_hmr net::ERR_INCOMPLETE_CHUNKED_ENCODING
For easier maintenance, get the dist/src paths in webpack.config from global config.json.
Exclude the contentbuilder from the main generator. Both contentbuilders (Craft and WP) are then attached as sub-generators.
To be future-proof, update Webpack and its config to >2.0.
When generating criticalCSS, Gulp generates only a part of it, due to problems with CSSNano.
The options to deactivate would be minifySelectors
and uniqueSelectors
.
Wait for more users to occur the same error.
On npm install -g generator-kittn
I get:
npm ERR! code 1 npm ERR! Command failed: /usr/bin/git checkout pull/6/head npm ERR! error: pathspec 'pull/6/head' did not match any file(s) known to git. npm ERR! npm ERR! A complete log of this run can be found in: npm ERR! /Users/m.rabelero.campos/.npm/_logs/2017-06-08T12_46_17_856Z-debug.log
The error log shows this error message:
35 silly fetchPackageMetaData error for command-exists@github:mathisonian/command-exists#pull/6/head Command failed: /usr/bin/git checkout pull/6/head 35 silly fetchPackageMetaData error: pathspec 'pull/6/head' did not match any file(s) known to git. 36 verbose stack Error: Command failed: /usr/bin/git checkout pull/6/head 36 verbose stack error: pathspec 'pull/6/head' did not match any file(s) known to git. 36 verbose stack 36 verbose stack at ChildProcess.exithandler (child_process.js:252:12) 36 verbose stack at emitTwo (events.js:125:13) 36 verbose stack at ChildProcess.emit (events.js:213:7) 36 verbose stack at maybeClose (internal/child_process.js:887:16) 36 verbose stack at Socket.stream.socket.on (internal/child_process.js:340:11) 36 verbose stack at emitOne (events.js:115:13) 36 verbose stack at Socket.emit (events.js:210:7) 36 verbose stack at Pipe._handle.close [as _onclose] (net.js:546:12) 37 verbose cwd /Users/m.rabelero.campos/Sites 38 verbose Darwin 15.6.0 39 verbose argv "/usr/local/Cellar/node/8.0.0_1/bin/node" "/usr/local/bin/npm" "install" "-g" "generator-kittn" 40 verbose node v8.0.0 41 verbose npm v5.0.3 42 error code 1 43 error Command failed: /usr/bin/git checkout pull/6/head 43 error error: pathspec 'pull/6/head' did not match any file(s) known to git. 44 verbose exit [ 1, true ]
On yarn add generator-kittn
I get:
yarn add v0.24.6 info No lockfile found. [1/4] 🔍 Resolving packages... error Couldn't find match for "pull/6/head" in "laggingreflex-sync,master,10/head,11/head,2/head,3/head,4/head,5/head,6/head,8/head,v0.1.0,v1.0.0,v1.0.1,v1.0.2,v1.1.0,v1.2.0,v1.2.1,v1.2.2" for "https://github.com/mathisonian/command-exists.git". info Visit https://yarnpkg.com/en/docs/cli/add for documentation about this command.
Users who have neither wget
nor wp-cli
installed (and probably also no git-cli
) get the installation with the generator Promise error.
For
First, only the idea how to rebuild the prompts to shorten the set of questions. Some questions like repository URL may even be superfluous. The respective answer could therefore also note later in the package.json.
01. (string) Projectname
02. (list) Projecttype [
html,
craft, // Set $cmsInstall Var
wordpress, // Set $cmsInstall Var
craft with contentbuilder, // Set $cmsInstall Var Set $cmsContentbuilder Var
wordpress with contentbuilder // Set $cmsInstall Var Set $cmsContentbuilder Var
]
// ------ if $cmsInstall and $cmsContentbuilder is true --------
03. (bool) Craft / Wordpress Install
04. (bool) Craft / Wordpress Environment Credentials
-> 04.01. (list) Credentials HTTP or HTTPS (needed?)
-> 04.02. (string) Credentials Domain
-> 04.04. (string) Credentials DB Host (needed? Normaly localhost)
-> 04.05. (string) Credentials DB User
-> 04.06. (string) Credentials DB Pass
-> 04.07. (string) Credentials DB Name
-> 04.08. (bool) Credentials Create DB
-> 04.09. (bool) Credentials Use Mamp Socket
// ------ if $cmsInstall is true --------
03. (list) Normalize [custom, regular, no]
04. (bool) Container Queries
05. (list) CSS Methodologies [own, atomic, itcss]
06. (bool) Craft / Wordpress Install
07. (bool) Craft / Wordpress Environment Credentials
-> 07.01. (list) Credentials HTTP or HTTPS (needed?)
-> 07.02. (string) Credentials Domain
-> 07.04. (string) Credentials DB Host (needed? Normaly localhost)
-> 07.05. (string) Credentials DB User
-> 07.06. (string) Credentials DB Pass
-> 07.07. (string) Credentials DB Name
-> 07.08. (bool) Credentials Create DB
-> 07.09. (bool) Credentials Use Mamp Socket
// ------ if Projecttype is html --------
03. (list) Normalize [custom, regular, no]
04. (bool) Container Queries
05. (list) CSS Methodologies [own, atomic, itcss]
// ------ Last General Questions --------
01. (string) CSS Filename
02. (list) Media Query Unit [em, px]
03. (string) Theme Color
04. (bool) Activate Stylelint
05. (bool) CriticalCSS
06. (list) jQuery [nope, slim, fullpackage]
07. (list) JS Reactive Frameworks [none, vue, react]
08. (check) Documentation [
Astrum Pattern Lib,
SassDoc
]
09. (string) Description (needed?)
10. (string) Project Version
11. (string) Project Author
12. (string) Project Mail
13. (string) Project Repository URL (needed?)
If you create Pagetemplates without an MVC framework (React, Vue, Angular and similar), then HMR is rather disturbing. Then it might be a good idea to add HMR as an option. If you have the option with Vue (or React, Angular) deactivated.
For easier Credential- and Version-Handling, create the style.css for Wordpress via https://www.npmjs.com/package/gulp-header
If there is no sass
or scss
file in the js-directory, the init tasks breaks by the webpack stylelintplugin due to this issue: webpack-contrib/stylelint-webpack-plugin#82
Naming the breakpoints in the $kittn-breakpoint-map as string will crash the compiler.
Example:
$kittn-breakpoint-map: (
small: (
size: 480px,
visibility: true,
step: true,
fontsize: false
)
}
Error:
Function bp did not return a value
on line 68 of src/framework/core/mixins/_break.scss
>> $size:
unit-check(bp($target,$list));
----------------------^
messageOriginal:
Function bp did not return a value
relativePath:
src/framework/core/mixins/_break.scss
Because of @include break(932px) is also possible in the mixin.
Hey, I see you're still using the older file commands. You might want to consider updating your generator to use the newer mem-fs based file commands (this.copy -> this.fs.copy
).
When writing style-definitions with multiple attributes, like border: 1spacer solid red
, the postcss-function removes everything after 1spacer
.
For easier and more professional usage of this generator, you need to provide a full-grown documentation over available functions (gulp, sass...).
Either put together from several parts to a Main.js specific to the project.
Or create multiple Main.js files for Vue, Craft, Wordpress.
Getting the following errors when I run yo kittn and choose all default settings.
I have tried reinstalling node.
SyntaxError: Unexpected token else in /Users/joshy/.nvm/versions/node/v10.0.0/lib/node_modules/generator-kittn/generators/app/templates/gulpfile/tasks/build.js while compiling ejs
If the above error is not helpful, you may want to try EJS-Lint:
https://github.com/RyanZim/EJS-Lint
at new Function ()
at Template.compile (/Users/joshy/.nvm/versions/node/v10.0.0/lib/node_modules/generator-kittn/node_modules/ejs/lib/ejs.js:592:12)
at Object.compile (/Users/joshy/.nvm/versions/node/v10.0.0/lib/node_modules/generator-kittn/node_modules/ejs/lib/ejs.js:388:16)
at handleCache (/Users/joshy/.nvm/versions/node/v10.0.0/lib/node_modules/generator-kittn/node_modules/ejs/lib/ejs.js:212:18)
at Object.exports.render (/Users/joshy/.nvm/versions/node/v10.0.0/lib/node_modules/generator-kittn/node_modules/ejs/lib/ejs.js:414:10)
at render (/Users/joshy/.nvm/versions/node/v10.0.0/lib/node_modules/generator-kittn/node_modules/mem-fs-editor/lib/actions/copy-tpl.js:12:16)
at process (/Users/joshy/.nvm/versions/node/v10.0.0/lib/node_modules/generator-kittn/node_modules/mem-fs-editor/lib/actions/copy-tpl.js:26:14)
at applyProcessingFunc (/Users/joshy/.nvm/versions/node/v10.0.0/lib/node_modules/generator-kittn/node_modules/mem-fs-editor/lib/actions/copy.js:13:16)
at EditionInterface.exports._copySingle (/Users/joshy/.nvm/versions/node/v10.0.0/lib/node_modules/generator-kittn/node_modules/mem-fs-editor/lib/actions/copy.js:63:16)
at files.forEach.file (/Users/joshy/.nvm/versions/node/v10.0.0/lib/node_modules/generator-kittn/node_modules/mem-fs-editor/lib/actions/copy.js:50:10)
[02:14:57] Requiring external module @babel/register
/Users/joshy/projects/kittn-5/gulpfile/tasks/browsersync.js:5
import kc from '../../config.json';
^^
SyntaxError: Unexpected identifier
at new Script (vm.js:74:7)
at createScript (vm.js:246:10)
at Object.runInThisContext (vm.js:298:10)
at Module._compile (internal/modules/cjs/loader.js:646:28)
at Module._compile (/Users/joshy/projects/kittn-5/node_modules/pirates/lib/index.js:91:24)
at Module._extensions..js (internal/modules/cjs/loader.js:689:10)
at Object.newLoader [as .js] (/Users/joshy/projects/kittn-5/node_modules/pirates/lib/index.js:96:7)
at Module.load (internal/modules/cjs/loader.js:589:32)
at tryModuleLoad (internal/modules/cjs/loader.js:528:12)
at Function.Module._load (internal/modules/cjs/loader.js:520:3)
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! [email protected] init: cross-env NODE_ENV=production gulp init --env=init && cross-env NODE_ENV=production npm run subtask:bundlewebpack
npm ERR! Exit status 1
Tested on Craft and HTML Projecttype.
Any changes to the main.js file will not result in a recompilation of the JS file. A path problem can be excluded because Webpack compiles the JS file at startup, in case of an error it displays this.
The error can be corrected in the runtime, which leads to the Webpack compiled again, but not more.
After some attempts, maybe someone else has an idea how to get browsersync without a snippet to run when the proxy is used.
Add a rs
-Unit for Spacer in rem
:
function(css) {
// Spacer Function
css.walkDecls(function (decl) {
const BASE = parseInt(kc.css.baseFontSize, 10)
if (decl.value.match(/spacer/)) {
const SPACER = parseInt(kc.css.spacer, 10)
decl.value = SPACER * parseFloat(decl.value) + 'px'
}
if (decl.value.match(/rs/)) {
const SPACER = parseInt(kc.css.spacer, 10)
decl.value = SPACER * parseFloat(decl.value) / BASE + 'rem'
}
if (decl.value.match(/pxrem/)) {
decl.value = parseFloat(decl.value) / BASE + 'rem'
}
})
}
User should be able to select if he needs SSR in combination with Vue.
Two more options for a simple and more advanced option.
Integration des Serviceworker Plugins - wäre vielleicht ganz Sinnvoll
https://github.com/oliviertassinari/serviceworker-webpack-plugin
Kittn does not recognize the correct path where the files should be created.
I did this in my console:
mkdir kittn
cd kittn
yo kittn
Then the installer says Please give the project a name (without Spaces) (xampphtdocs)
it seems to ignore the windows directory separator, because the folder or project name should be either xampp/htdocs/kittn or the kittn directory should be created automatically in xampp/htdocs/
Could you provide a fix for this? I am willing to test.
Some seem to have problems with Axios, would not it be quite good if we would offer optional Vue-Resource as an alternative?
For smaller javascript, add https://github.com/babel/babel-preset-env and change the .babelrc
to:
{
"presets": [
["env",
{
"targets": {
"browsers": ["> 5%", "ie >= 11"]
},
"useBuiltIns": true
}
],
"es2015",
"stage-0"
]
}
Use vars for predefined settings:
E.g. yo kittn --px
to automatically use px-media-queries (or other defaults...)
i've setup a project with yo kittn and vue (runtime only) - everything works great, i use twig and scss
commands i have run after yo kittn:
npm run init
npm run develop
no errors
twig and scss working but not vue - no output in div #app
default vue setup with app.js and app.vue is as its coming out from the yo kittn generator
what am i missing?
Idea would be a generator or subgenerator that generates new components, the corresponding Sass/ SCSS, JS and HTML / Twig / PHP files, assigning them to the directories. Basic info and headers are written into the files.
The generator is semi-dynamic. Basic information about project type, ITCSS / Atomic etc. should refer to the config.json or a .kittnrc file. The user should only be queried by name and type (object, component, element, whatever).
With Installing WP-CLI manually it works.
URL to the Git-Repo error connecting: Error: connect ECONNREFUSED 127.0.0.1:3306 at Object.exports._errnoException (util.js:949:11) at exports._exceptionWithHostPort (util.js:972:20) at TCPConnectWrap.afterConnect [as oncomplete] (net.js:1080:14) -------------------- at Protocol._enqueue (/Users/deadpool/node_modules/mysql/lib/protocol/Protocol.js:141:48) at Protocol.handshake (/Users/deadpool/node_modules/mysql/lib/protocol/Protocol.js:52:41) at Connection.connect (/Users/deadpool/node_modules/mysql/lib/Connection.js:130:18) at yeoman.Base.extend.app (/Users/deadpool/node_modules/generator-kittn/app/index.js:624:18) at Object.<anonymous> (/Users/deadpool/node_modules/yeoman-generator/lib/base.js:439:23) at /Users/deadpool/node_modules/run-async/index.js:25:25 at /Users/deadpool/node_modules/run-async/index.js:24:19 at /Users/deadpool/node_modules/yeoman-generator/lib/base.js:440:9 at tryOnImmediate (timers.js:543:15) at processImmediate [as _immediateCallback/Users/deadpool/node_modules/generator-kittn/app/index.js:632 if (error) throw error; ^ Error: connect ECONNREFUSED 127.0.0.1:3306 at Object.exports._errnoException (util.js:949:11) at exports._exceptionWithHostPort (util.js:972:20) at TCPConnectWrap.afterConnect [as oncomplete] (net.js:1080:14) -------------------- at Protocol._enqueue (/Users/deadpool/node_modules/mysql/lib/protocol/Protocol.js:141:48) at Protocol.handshake (/Users/deadpool/node_modules/mysql/lib/protocol/Protocol.js:52:41) at Connection.connect (/Users/deadpool/node_modules/mysql/lib/Connection.js:130:18) at yeoman.Base.extend.app (/Users/deadpool/node_modules/generator-kittn/app/index.js:624:18) at Object.<anonymous> (/Users/deadpool/node_modules/yeoman-generator/lib/base.js:439:23) at /Users/deadpool/node_modules/run-async/index.js:25:25 at /Users/deadpool/node_modules/run-async/index.js:24:19 at /Users/deadpool/node_modules/yeoman-generator/lib/b%
Optimize the confirmation of the CraftCMS terms with a break, or trigger it after yarn init.
The CSS filename is always style.css and not the value setted in the yeoman config process.
Search for a other Keyword, rs
is to short. Otherwise it triggers with background-image: url("data:image/svg+xml;charset=utf-8,
.
if (decl.value.match(/rs/)) {
decl.value = SPACER * parseFloat(decl.value) / BASE + 'rem'
}
The yo-install seems to work without any problems, but Gulp and Webpack are throwing ugly errors. Test and Fix!
Now i have included a Webpack Config with a Middleware for BrowserSync. Perfect for building Themes for a CMS.
But I think for the app development, it is better to use Webpack to the full extent. So as a bundler and a builder. Its also better for SSR with Vue.
Also adding an automated Import with Node
Default-Images in src/.system
are broken and not usable.
Webpack Experts needed. The current Webpack Workflow have several Issues.
Webpack with Custom URL and HMR
In combination with a custom URL, HMR didn't trigger. Any Change on a JS File didn't trigger HMR in the Browser
Webpack with Custom URL without HMR
Any Change on a JS File have to Bundle manually, otherwise you get no Updates.
Overall Webpack Config
Its Ugly, not smart enough.
Vue-CLI have this Feature. When the Prompt ask for Name and Email, the CLI read the local Git User as default Value.
Version: 4.0.0-alpha.20
When installing for creating a wordpress theme, browsersync is not working. It's starting just fine, but doesn't open a window though, neither providing a frontend-URL, only a backend-URL (:3001
).
In the backend, it says:
Place this snippet somewhere before the closing </body> tag in your website:
<script id="__bs_script__">//<![CDATA[
document.write("<script async src='http://HOST:3000/browser-sync/browser-sync-client.js?v=2.17.1'><\/script>".replace("HOST", location.hostname));
//]]></script>
Even though I did that, still it isn't working.
Currently, HMR does not work if you run a browsersync proxy (own domain). Is then problematic if you want to build a page with a PHP CMS, which should run with Vue, React or Angular (HMR active). A refresh of the page is not enough, you have to compile the javascript manually.
The biggest drawback is the missing javascript hot reload, which could be annoying at SPAs.
Based on this Article https://medium.com/the-vue-point/retiring-vue-resource-871a82880af4#.ehxb3xc23
We are dropping Vue-Resource and integrate Axios as HTTP Client Lib.
Kittn mit WordPress-CB:
Section hinzufügen und dort unter Option den Style auf default stehen haben, funktioniert nicht, da die default-Klasse nicht hinzugefügt wird.
Es wird also nicht:
<section class="c-section c-section--s-default">
gesetzt.
Stelle ich auf "Style 1", wird aber
<section class="c-section c-section--s-style1">
ausgegeben.
When entering a name for the project, which is used in the package.json, yo should check for illegal characters like whitespaces, which prevent yarn or npm from installing dependencies.
Maybe this would be a good way: https://medium.com/@adambisek/how-to-check-minimum-required-node-js-version-4a78a8855a0f
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.