kr239 / macintosh-se-reloaded Goto Github PK

In the BOM, the part number for the internal floppy headers seems to be incorrect. Molex 87831-5920 is a 2mm pitch header with a pin missing, but the floppy connector uses a 2.54mm pitch header with no keying pin missing.

Hi @kr239, as I mentioned in a PM on the 68kMLA forums, there does not appear to be any hardware license specified for the gerbers you've created and posted on the 68kMLA forum (Version 1.5). Ideally, this license would be specified in a text file both inside the gerber zip file, as well as here at this repo. I suggest you visit https://www.oshwa.org/faq/ if you haven't already settled on licensing terms (or decided to release it as public domain)

I looked over the board pics and I think I identified a few places where the was board transcription errors form the original pictures to a new board layout. I know you have already corrected some of these errors, but I thought that a second set of eyes on some possible trace inconsistencies may help. If the information I provide is incorrect please disregard, and I apologize for any errors that I make. I’m truly just trying to be helpful and a big fan of this project and what you are trying to accomplish. Truly amazing my goodman.

Well, they are pushbuttons, but which size are they ?

I apologize if it was listed somewhere, however I've been unable to locate the value for RN1 of the *Macintosh SE EEPROM to ROM adapter. Would you be able to provide that value and perhaps a part number? Thank you.

• an adapter that replaces the stock Toshiba TC531000 mask ROMs with any 27C010.