krunal09 / sample Goto Github PK

What steps will reproduce the problem?
1. calling from text dialer

What is the expected output? What do you see instead?
The outgoing call is ok but on csipsimple I don't listen ringing

What version of the product are you using? On what operating system?
011 on HTC Legend 2.1

Please provide any additional information below.
Great improvements in the new version.
For me is very usefull in the availability profile the option "Only for 
outgoing"
No more freeze but sometimes the app is slow closing a call

Thanks, great job

What steps will reproduce the problem?

1.Have a SAMSUNG Spica with standard ROM non-rooted 2.1 eclair and 
csipsimple installed (tested with 0.0.4 ; 0.06 et 0.0.9)
2.Launch the soft and call somebody : i can speak et heard what it's said 
but :
3.The phone is blocked ! We can only unblock the phone by removing the
battery...

Add a preference to enable/disable 3G/Wifi connection for SIP.

What steps will reproduce the problem?
1. Have a HTC HERO with standard ROM non-rooted Cupcake 1.5 and csipsimple
installed
2. Launch the soft and call somebody
3. The phone is blocked ! We can only unblock the phone by removing the
battery...

722 is more desirable over Wifi than 3G/GPRS.
Speex 8khz is more desirable over 3G/GPRS than Wifi.

Perhaps instead of values, allow codecs to be slid into order of priority (like 
a Playlist), but when 
clicked allow user to choose from [Disabled, Wifi Only, Wifi & 3G, 3G Only, 
Enabled].

Cheers.

What steps will reproduce the problem?
1. Register SIP
2. Open Dialer
3. Try to dial any number

What is the expected output? What do you see instead?
Nothing happens!

What version of the product are you using? On what operating system?
Last

Please provide any additional information below.
I can recieve calls.

What steps will reproduce the problem?
1. Install csipsimple on ADR6300
2. Uncheck box to deactivate dialer integration
3. Attempt to place an outbound call with dialer

What is the expected output? What do you see instead?
Expect to place call - instead given option for csipsimple accounts and
GSM.  Selecting GSM attempts an international call.

What version of the product are you using? On what operating system?
0.00-09 on Android 2.1 (ADR6300)

Please provide any additional information below.
Forced to uninstall so I could place outbound calls again.

What steps will reproduce the problem?
1. Samsung Galaxy i7500 - Today returned from service with Android 1.6
Donut (was 1.5 before)
2. Install and run MediaLibGet

What is the expected output? What do you see instead?
I get on screen message:
" Email:
  No application can perform this action."

Please provide any additional information below.
From contacts if I choose someones email address it offers me to send email
using one of two offered email clients.

By the way CSipSimple crash on Samsung Galaxy i7500 with Android 1.6 after
I add account. On restart it crash immediately. So only what I can do is
uninstall and install again.

Tihomir

I try to add my webcalldirect account without success as it is not
connecting in the end. 

Account name: webcalldirect
Account id: 'my name'
Registration URI: sip:webcalldirect.com
Realm: *
Username: 'username string' 
Data (password): 'password string'
Data Type: plain password
Scheme: Digest
Publish enabled: no

What am I doing wrong? 
Thanks for the help

Select the good account => outgoing domain for digit dialer.

For now it's hardcoded to freephonie

When we try to switch between digit and text dialer, crash within archos
framework (should I ask support to archos?).

For now a quick fix could be to disable 3d animation for archos...

The program froze after answering a call.  I could still hear the caller
and they could still here me.  The time of call was stuck at 4 seconds and
none of the on screen buttons would work.  I was trying to hit speaker to
turn it on to test that out and nothing happened.  I had to close the
program using advanced task killer.  Since then, the speakerphone won't
turn off.  I can tap the button and the color changes like that it's either
activated or not, but it stays the same being on. Tried restarting phone
and also reinstalling but it is still stuck on inside the program.

What is the expected output? What do you see instead?
Expect to be able to turn speaker on and off.

What version of the product are you using? On what operating system?
0.00-08 and Android 1.5 on Sprint Hero.

Please provide any additional information below.
The program itself seems to work great minus a few freezes every now and
again, however, with the speakerphone stuck on it's unusable right now.

What steps will reproduce the problem?
1.go expert setup.
2.
3.

What is the expected output? What do you see instead?
the Proxy field should be "sip:xxx.xxx.xxx.xxx:pppp .Where xxx is IP
address and pppp is port.

However it always default me to input sip:proxy.net

What version of the product are you using? On what operating system?

version 0.00-11

Please provide any additional information below.
my SIP server uses proxy but no domain name, instead use ip-address and port

We need to provide a simple way to set the CallerID.

For now I think that expert wizard (by using the account id field) can
allow it. 
But, by the way, that's not enough : a simpler field has to be add (maybe
in another wizard).

Besides the availability to change the wizard of an account should be
provided (that's already design to enable it, only the ui is missing)

Feature request:
Please add IAX2 support. IAX2 is much easier to configure on server side.

Errors when downloading the sip stack at first launch are not well handled

Remove useless resources from drawable-mdpi
(since drawable is mandatory for 1.5 and for now mdpi = default for the
resources)?

The fastest way to manage private api was to make my builds using ld linker
to handle links on the media-api.

I have to explore a cleaner way (that should solve a lot of problems for
specific manufacturers builds), using dlopen and dlsym (plugin like inclusion).

This would simplify the way the NDK is modified (we could maybe revert to
standard ndk???)

Implement the G729 Codec

-> What steps will reproduce the problem?
1. Download the application on the market.
2. Download additionnal components using the application.
3. Use the "Next" button when it's done.

-> What is the expected output? What do you see instead?
The program should work. It crashes instead (no forceclose, nothing at all).

-> What version of the product are you using? On what operating system?
I'm using The Robot (similar to Sciphone N19) from Chinavasion, Android 1.5.

-> Please provide any additional information below.
I attached the log.

Include GSM codec

What steps will reproduce the problem?
1.Make (or receive) one call after the other.
2.
3.

What is the expected output? What do you see instead?
First calls are succesful. Then one call fails, the app crashes and the 
phone needs to be restarted.

Disabling CODECS other than PCMU and PCMA apparently solves the problem.

What version of the product are you using? On what operating system?
0.00-11 - Android 1.5 on Motorola DEXT

Please provide any additional information below.

What steps will reproduce the problem?
1. start CSipSimple
2. Open contact list
3. make standard outgoing call
4. try to make another outgoing call from contact list

What is the expected output? What do you see instead?
I would like to choose again how to make a call, I can make only standard 
call from contact list

What version of the product are you using? On what operating system?
0.00-11 on HTC Legend Android 2.1

What steps will reproduce the problem?
1. Have someone call your sip number.

What is the expected output? What do you see instead?
I expect to hear ringing until phone is answered, caller hangs up, or goes to 
voicemail.  Instead 
the phone only rings once.
Vibrate works as expected though.  It continues to vibrate until I answer.

What version of the product are you using? On what operating system?
9 on Nexus 2.1

Please provide any additional information below.
This problem also occurs on SipDroid and SipAgent (on the G1 1.6 as well as 
Nexus).  Some have 
suggested on SipDroid to choose a long ring tone to compensate for it not 
repeating.

What steps will reproduce the problem?
1. Create a basic or an expert profile.
2. Unable to specify any NAT / Firewall options
3.

What is the expected output? What do you see instead?


What version of the product are you using? On what operating system?
N1 with Android. CSip Simple Version 9.

Please provide any additional information below.
When connecting from home, there is no problem. When connecting from work,
a NAT / Firewall should be specified, but there is no option to do so. For
an incoming call, there is only a one way voice transmission. 

Detect current Android version + device + (build version?) to choose the
good library version that must be in use (in fact which android driver has
to be used).

Once detected, download the good version online (we should have a json
descriptor for example with updates and versions selections...

MediaGetLib, doesn't work with android 1.5.

What steps will reproduce the problem?
1. U Need HTC Desire
2. Call with voipblast - Betamax
3.

What is the expected output? What do you see instead?
I hear my patner on the other fon but he cant hear me very well my voice is
too quiet. Other sipphones provide button for boost , maybe thats a desire
issue, i hab to boost it to 4X on other apps.

What version of the product are you using? On what operating system?
desire 2.1 update1 with csip

Please provide any additional information below.

Enable dynamic upload of dynamic library for new devices.
(Has to get the build number, android version, hardware name etc etc)

If possible upload should be done directly on google code using user Google
account (and tracking of the issue should be done directly from the
application ( by webview?) )

Include ilbc codec.

For each SIP account allow:
Protocol and Port number to be set, for conflicting SIP accounts.
Multiple Regex to specify ranges, eliminating need for user to choose SIP 
account every call.
Account ordering, so first SIP account with matching Regex makes the call.
Regex rewrite to format numbers for each SIP account if necessary.

Thanks.

Speex codec integration.

Enable network changes:
* Re-register...
* Ongoing call...

What steps will reproduce the problem?
1. Create an account (basic or expert)
2. Want to erase it but unable to do so. 

What is the expected output? What do you see instead?


What version of the product are you using? On what operating system?
N1 with Android. CSip Simple version 9. 

Please provide any additional information below.

Add a configuration parameter for stack repository. Default it to
www.csipsimple.com (use googlecode download section)

Although G729 is more common, it's unlikely to practical in a free product due 
to its licensing 
constraints.  

iLBC offers better packet loss concealment and is widely supported.  Although 
royalty free, I hear 
that the only available integer code is sold under licence - (I hope I heard 
wrong).  The freely 
distributed code is therefore floating point only, which is not ideal for 
phones.  (Maybe Nexus and 
Droid are fast enough anyway?)

Thoughts?

it would be nice to be able to use the standard dialer, àla Sipdroid or
SipAgent

We have to set the default audio routing and sound volume

What steps will reproduce the problem?
1. Requires an account with pbxes.org 
2. Use the basic account wizard in CSipSimple to access pbxes.org
3. Change the settings to use TCP
4. Attempt to register, status only says "In progress"

What is the expected output? What do you see instead?
A successfull registration enabling incomming and outgoing calls to be made.

What version of the product are you using? On what operating system?
0.00-11 on Nexus One (with Android 2.2)

Please provide any additional information below.
I usually use a setup using TCP with pbxes.org in order to consume battery. 
This works in Sipdroid but I have not managed to register CSipSimple with 
pbxes.org using TCP. With UDP it works fine in CSipSimple.

I'd love to see a setting on the preferred call type:
1. Prefer SIP (pick a SIP account if many are defined) when available
2. Prefer phone
3. Always ask
The current behavior will fit the "always ask" setting. 

Also I'd like to see the exception setting changed (especially if changes above 
are implemented), 
would be great if it offered a confirmations such as "the calls will be made 
using <option> unless" 
and a link to a description of what format exceptions are expected would be 
great.

Add a screen for first launch (/first launch after version update).

This screen may contain a quick how to / link to how to web page (could be
on the wiki or hosted on my domain...)
If it's an update should show a changelog.

Lock the screen during a call.

* Use proximity sensor if present
* Else use the same timer that the one used in the android phone application.

Add dialer that enable to enter text
(and domain).

Include Linear/L16 codec family from the build

Feature request: 

Add webcallback, callback, callthrough to csipsimple. If connection is not
available or too bad for call, user should be able to choose connection via
GSM and callthrough or callback (GSM number), or trigger a callback via a
http adress.

Feature request:

Please add internationalization to csipsimple. I would be willing to help 
and contributelanguage file for German. 

What steps will reproduce the problem?

- Please add proxy setting on basic account setting, when I tried with 
experts setting, it won't allow me to save. My SIP provider works with 
proxy setting only.


What is the expected output? What do you see instead?

- able to call ;)

What version of the product are you using? On what operating system?

- Samsung Galaxy Spica, Eclair (Android 2.1)

Please provide any additional information below.

- Thanks!

What steps will reproduce the problem?
1. Run csipsimple
2. Add account (Expert or Alcatel)
3. Save changes

What is the expected output? What do you see instead?
I expect to have an account added but, if I add an "Expert" account, when 
tapping save, I get the 
Account Wizard dialogue and the account is not added. If I add an Alcatel 
account, when I tap save 
the application crashes. The only accounts that can be added are freephonie 
ones.

What version of the product are you using? On what operating system?
I'm using csipsimple FeteDuSIP release on an HTC Hero.

What steps will reproduce the problem?
1. Install OpenIMS Core 
2. Start it
3. Try register in mobile with csipsimple

What is the expected output? What do you see instead?
It suppose to register it.
I checked in Wireshark and OpenIMS retrieve "SIP Status 400 Bad Request 
P-Visited-Network 
header missing"

What version of the product are you using? On what operating system?
Current.

I'm able to call even without register, but others can't call to me because I 
wasn't registered.
If you need pcap files to see packets I can attach it.

Just let me know if you need further information.

Support SMS (if account (sip server) allow it).