Configuration | model |
---|---|
CPU | I3-10100 |
Motherboard | B460M Bazooka |
RAM | GSKILL 2666 8G*2 |
Graphics card | I3-10100 nuclear display UHD630 |
- Supports all 10-generation CPUs with UHD630 cores
- The 10th generation CPU of non-core display with F can also have the following independent display without drive (but cannot use nuclear display acceleration)
- Support UHD630 graphics card with only CPU core display
- Support AMD RX 470/480/570/570X/580/580X/590 series graphics cards
- Support AMD RX 5500/5600/5700 series graphics cards (dedicated config.plist required)
PS: To use the independent display, you need to forcibly turn on the CPU core display in the BIOS (Advanced -> Built-in display configuration -> Integrated graphics multi-monitor (IGD Multi-monitor) -> Allow), otherwise the core display hardware decoding will fail and only use the core Obviously can be ignored
- USB device wake up from S3/S4/S5: Allow
- PS/2 mouse wake up from S3/S4/S5: Allow
- USB keyboard wake up from S3/S4/S5: any key
- Integrated graphics and multiple monitors: Allowed (otherwise the hardware decoding of the core display will fail, and those that only use the core display can be ignored)
- CFG lock: prohibited
OpenCore: 0.6.7
macOS version: 11.2.3
EFI download link: Download
- System Preferences -> Network -> Ethernet (Advanced) -> Hardware -> Configuration: Manual, Speed: 100baseTX (1000baseT can be selected for Gigabit network environment), Duplex: Full Duplex, MTU: Standard 1500
Feel free to Buy Me a Coffee or 1KqjVujJduNRNWxZAAvr61fRg945WPuGhF