i2ite's Introduction

I2ITE

Tool for talking to ITE ECs via SMBus debug interface (DBGR/SMB).

Wiring

Check your board´s schematics for SDA/SCL on the battery connector. D0 of your FTDI interface goes to SCL, while D1+D2 togeter form SDA.

                                  +---+
+------+                          | 1 |
|   D2 |--+-----------+           | 2 |
|      |  |           |           | 3 |
|   D1 |--+           |           | 4 |
|      |              +-----------| 5 | SDA
|   D0 |--------------------------| 6 | SCL
|      |                          | 7 |
|  GND |--------------------------| 8 | GND
+------+                          | 9 |
                                  +---+
FT2232H/FT4232H/FT232H            Battery connector
                                  (in this example: Clevo L140CU)

Dependencies

I2ITE depends on pyftdi. To be able to really relax the bus and allow other devices to communicate, you should use this additional patch: https://github.com/eblot/pyftdi/pull/314/commits/051ccb2d087fe43e92b9d688cf81649276db1d6b

Example usage

Read some data

$ ./i2ite.py ftdi://ftdi:4232/2 0xff24
ff24: 07

Write some data

$ ./i2ite.py ftdi://ftdi:4232/2 0xffab 0x00

... or in some python shell like ipython:

import i2ite
> i = i2ite.I2ITE("ftdi://ftdi:4232/2")
> i.xram_dump(0, 0x10)
      00 01 02 03  04 05 06 07  08 09 0a 0b  0c 0d 0e 0f
      -- -- -- --  -- -- -- --  -- -- -- --  -- -- -- --
0000: 05 b1 11 34  12 b1 00 00  00 00 00 00  00 00 00 00
0010: 00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00