This is a simple RISC-V 3-stage pipeline processor and supports FreeRTOS. I wrote this code to understand the RV32IM instruction set, just for fun. The performance is 1.821 DMIPS/MHz and 3.120 Coremark/MHz. This is not a RISC-V core available for production.
- Three-stage pipeline processor
- RV32IM instruction sets
- Pass RV32IM architecture test
- Trap exception
- Interrupt handler
- FreeRTOS support
- ISS simulator
Install RISCV toolchains.
# Ubuntu packages needed:
sudo apt-get install autoconf automake autotools-dev curl libmpc-dev \
libmpfr-dev libgmp-dev gawk build-essential bison flex texinfo \
gperf libtool patchutils bc zlib1g-dev git libexpat1-dev python3 \
python-is-python3 lcov
git clone --recursive https://github.com/riscv/riscv-gnu-toolchain
cd riscv-gnu-toolchain
mkdir build; cd build
../configure --prefix=/opt/riscv --with-isa-spec=20191213 \
--with-multilib-generator="rv32i-ilp32--;rv32im-ilp32--;rv32imac-ilp32--;rv32im_zicsr-ilp32--;rv32imac_zicsr-ilp32--;rv64imac-lp64--;rv64imac_zicsr-lp64--"
make -j$(nproc)
Notes: change the default ISA to 20191213, refer to RISC-V GNU toolchain bumping default ISA spec to 20191213 for detail.
The default tools uses riscv64-unknown-elf-. If you would like to use others toolchains, you can define an environment to override it. For example,
export CROSS_COMPILE=riscv-none-elf-
Therefore, you can use The xPack GNU RISC-V Embedded GCC instead of building a toolchain yourself. It has been changed to default ISA spec to 20192013, but it does not include rv32im_zicsr multlib. The workaround is using -misa-spec=2.2 to force RISC-V GCC using the older ISA spec version. Adding extra CFLAGS as follows.
export EXTRA_CFLAGS="-misa-spec=2.2 -march=rv32im"
Folder | Description |
---|---|
coverage | Code coverage report |
doc | Instruction set document |
rtl | RTL files |
sim | Icarus Verilog/Verilator simulation environment |
sw | Benchmark, diags ... etc. |
syn | Synthesis environment for Yosys |
tests | Compliance tests |
testbench | testbench, memory model |
tool | ISS (instruction set simulator) |
Support Verilator (default) and Icarus Verilog.
To run Verilator,
# Ubuntu package needed to run the RTL simulation
sudo apt install verilator
# Modify the Makefile, and set verilator ?= 1
vim sim/Makefile
or
make verilator=1
To run Icarus Verilog,
# Ubuntu package needed to run the RTL simulation
sudo apt install iverilog
# Modify the Makefile, and set verilator ?= 0
vim sim/Makefile
or
make verilator=0
Only running make without parameters will get help.
$ make
make all build all diags and run the RTL sim
make all-sw build all diags and run the ISS sim
make tests-all run all diags and compliance test
make coverage generate code coverage report
make build build all diags and the RTL
make dhrystone build Dhrystone diag and run the RTL sim
make coremark build Coremark diag and run the RTL sim
make clean clean
make distclean clean all
rv32c=1 enable RV32C (default off)
debug=1 enable waveform dump (default off)
coverage=1 enable coverage test (default off)
test_v=[1|2] run test compliance v1 or v2 (default)
For example
make tests-all run all tests with test compliance v1
make test_v=2 tests-all run all tests with test compliance v2
make coverage=1 tests-all run all tests with code coverage report
make debug=1 hello run hello with waveform dump
Supports following parameter when running the simulation.
+no-meminit do not memory initialize zero
+dump dump VCD (Icarus Verilog) / FST (Verilator) file
+trace generate tracelog
For example, following command will generate the VCD dump.
cd sim && ./sim +dump
Use +trace to generate a trace log, which can be compared with the log file of the ISS simulator to ensure that the RTL simulation is correct.
cd sim && ./sim +trace
The rvsim is an instruction set simulator (ISS) that can generate trace logs for comparison with RTL simulation results. It can also set parameters of branch penalty to run benchmarks to see the effect of branch penalty. The branch instructions of hardware is two instructions delay for branch penalties.
Usage: rvsim [-h] [-b n] [-p] [-l logfile] file
--help, -h help
--branch n, -b n branch penalty (default 2)
--predict, -p static branch prediction
--log file, -l file generate log file
file the elf executable file
The ISS simulator and hardware supports RV32IMC instruction sets. (RV32C is disabled by default to pass conformance test v1)
This is the RV32IM simulation result in GCC11.
The call tree generated by graphgen.
Generated by command 'graphgen -t -r main -i printf,puts,putchar dhrystone.dis'
Dhrystone Benchmark, Version 2.1 (Language: C)
Program compiled without 'register' attribute
Please give the number of runs through the benchmark:
Execution starts, 100 runs through Dhrystone
Execution ends
Final values of the variables used in the benchmark:
Int_Glob: 5
should be: 5
Bool_Glob: 1
should be: 1
Ch_1_Glob: A
should be: A
Ch_2_Glob: B
should be: B
Arr_1_Glob[8]: 7
should be: 7
Arr_2_Glob[8][7]: 110
should be: Number_Of_Runs + 10
Ptr_Glob->
Ptr_Comp: 149152
should be: (implementation-dependent)
Discr: 0
should be: 0
Enum_Comp: 2
should be: 2
Int_Comp: 17
should be: 17
Str_Comp: DHRYSTONE PROGRAM, SOME STRING
should be: DHRYSTONE PROGRAM, SOME STRING
Next_Ptr_Glob->
Ptr_Comp: 149152
should be: (implementation-dependent), same as above
Discr: 0
should be: 0
Enum_Comp: 1
should be: 1
Int_Comp: 18
should be: 18
Str_Comp: DHRYSTONE PROGRAM, SOME STRING
should be: DHRYSTONE PROGRAM, SOME STRING
Int_1_Loc: 5
should be: 5
Int_2_Loc: 13
should be: 13
Int_3_Loc: 7
should be: 7
Enum_Loc: 1
should be: 1
Str_1_Loc: DHRYSTONE PROGRAM, 1'ST STRING
should be: DHRYSTONE PROGRAM, 1'ST STRING
Str_2_Loc: DHRYSTONE PROGRAM, 2'ND STRING
should be: DHRYSTONE PROGRAM, 2'ND STRING
Number_Of_Runs: 100
User_Time: 31250 cycles, 26444 insn
Cycles_Per_Instruction: 1.181
Dhrystones_Per_Second_Per_MHz: 3200
DMIPS_Per_MHz: 1.821
Excuting 100467 instructions, 130379 cycles, 1.298 CPI
The call tree generated by graphgen.
Generated by command 'graphgen -t -r main -i printf,puts,putchar coremark.dis'
2K performance run parameters for coremark.
CoreMark Size : 666
Total ticks : 1282091
Total time (secs): 0.012821
Iterations/Sec : 311.990335
Iterations : 4
Compiler version : GCC11.1.0
Compiler flags : -O3 -march=rv32im -mabi=ilp32 -nostartfiles -nostdlib -L../common -DPERFORMANCE_RUN=1 -fno-common -funroll-loops -finline-functions -falign-functions=16 -falign-jumps=4 -falign-loops=4 -finline-limit=1000 -fno-if-conversion2 -fselective-scheduling -fno-tree-dominator-opts -fno-reg-struct-return -fno-rename-registers --param case-values-threshold=8 -fno-crossjumping -freorder-blocks-and-partition -fno-tree-loop-if-convert -fno-tree-sink -fgcse-sm -fno-strict-overflow -lc -lm -lgcc -lsys -T ../common/default.ld
Memory location : STACK
seedcrc : 0xe9f5
[0]crclist : 0xe714
[0]crcmatrix : 0x1fd7
[0]crcstate : 0x8e3a
[0]crcfinal : 0x9f95
Correct operation validated. See README.md for run and reporting rules.
CoreMark 1.0 : 311.990335 / GCC11.1.0 -O3 -march=rv32im -mabi=ilp32 -nostartfiles -nostdlib -L../common -DPERFORMANCE_RUN=1 -fno-common -funroll-loops -finline-functions -falign-functions=16 -falign-jumps=4 -falign-loops=4 -finline-limit=1000 -fno-if-conversion2 -fselective-scheduling -fno-tree-dominator-opts -fno-reg-struct-return -fno-rename-registers --param case-values-threshold=8 -fno-crossjumping -freorder-blocks-and-partition -fno-tree-loop-if-convert -fno-tree-sink -fgcse-sm -fno-strict-overflow -lc -lm -lgcc -lsys -T ../common/default.ld / STACK
CoreMark/MHz: 3.119903
Excuting 1306645 instructions, 1617219 cycles, 1.238 CPI
Note: Coremark requires a total time of more than 10 seconds, but this will result in a longer simulation time. This Coremark value provides a reference when the iteration is 4.
Name | GCC11 RV32IM | GCC11 RV32IM (*1) | GCC11 RV32IM (*2) |
---|---|---|---|
Dhrystone | 1.821 DMIPS/MHz 1.298 CPI |
1.844 DMIPS/MHz 1.158 CPI |
2.151 DMIPS/MHz 1.000 CPI |
Coremark | 3.120 Coremark/MHz 1.238 CPI |
3.470 Coremark/MHz 1.102 CPI |
3.815 Coremark/MHz 1.000CPI |
Note 1: this is a measurement made by ISS simulator for GCC11 with static branch prediction.
Note 2: this is a measurement made by ISS simulator for GCC11 with no branch penalty. This is the best case for single issue and in order execution on RV32IM. The 1.0 CPI is the upper limit of optimal performance.
Note 3: After using LTO (Link Time Optimization), Dhrystone scored an unreasonable score of 3.759 DMIPS/MHz on GCC11 RV32IM. To make the benchmark reasonable, I did not use the -flto option. If the -flto option is used, the score will be higher.
Benchmark | gcc-7.2 | gcc-8.3 | gcc-9.2 | gcc-10.2 | gcc-11.1 | gcc-12.1 |
---|---|---|---|---|---|---|
DMIPS/MHz | 1.797 | 1.821 | 1.821 | 1.821 | 1.821 | 1.792 |
CoreMark/MHz | 3.080 | 3.060 | 2.736 | 2.783 | 3.120 | 2.872 |
Two instructions branch penalty if branch taken, CPI is 1 for other instructions. The average Cycles per Instruction (CPI) is approximately 1.3 on Dhrystone diag.
This core is three-stage pipeline processors, which is Fetch & Decode (F/D), execution (E) and write back (WB).
- Register Forwarding
The problem with data hazards, introduced by this sequence of instructions can be solved with a simple hardware technique called forwarding. When the execution result accesses the same register, the execution result is directly forwarded to the next instruction.
- Branch Penalty
When the branch is taken during the execute phase, it needs to flush the instructions that have been fetched into the pipeline, which causes a delay of two instructions, so the extra cost of the branch is two.
One instruction memory and one data memory. The instruction memory is read-only for one read port, while data memory is two port, one for reading and one for writing.
Provide the Yosys synthesis script in the syn folder.
Architecture test for ISS simulator and RTL. This is the architecture test form RISC-V Foundation Compliance Task Group. The github repository is at https://github.com/riscv-non-isa/riscv-arch-test. Running the following command will clone the repository into tests folder and do the compliance test.
make tests # run the compliance test for RTL
make tests-sw # run the compliance test for ISS simulator
Default is to run compliance test v1, run the following command to run compliance test v2.
make test_v=2 tests # run the compliance test for RTL
make test_v=2 tests-sw # run the compliance test for ISS simulator
Reference code on https://github.com/kuopinghsu/FreeRTOS-RISCV.
# build FreeRTOS and demo
git clone --recursive https://github.com/kuopinghsu/FreeRTOS-RISCV
cd FreeRTOS-RISCV && make
This is an example to run the "queue" demo.
# make directory
mkdir ${path_of_srv32}/sw/queue
# copy queue.elf
cp Demo/examples/queue.elf ${path_of_srv32}/sw/queue/.
# update the example in sw folder
cd ${path_of_srv32}/sw && make update
# run the example for RTL and ISS simulator
cd ${path_of_srv32} && make queue
# Ubuntu package needed to generate coverage report
sudo apt install lcov
Following command will generate the code coverage report in coverage/html directory.
% make coverage
This is the coverage report of RTL by lcov, which get 100% code coverage.
This is the coverage report of ISS.
- Memory can not respond non-valid, that is, the memory should always accept the command from CPU.
- merge the memory interface into one memory for one port
- static branch predictor
- support RV32C compress extension
- serial multiplier and divider
- Nuttx & Zephyr porting
MIT license