Error at linking CXX executable paperCrop about papercrop

[GoogleCodeExporter]

This seems to be related. It is said that redhat comes with an outdated 
fontconfig library. It's difficult to believe that OS-supplied libraries have 
version conflict though. 
http://stackoverflow.com/questions/2480410/how-can-i-update-fontconfig-to-a-newe
r-version-in-red-hat-5-3

They suggest this, but I am not sure if this is safe operation or not.
{{{
cd /usr/src
wget http://fontconfig.org/release/fontconfig-2.4.2.tar.gz
tar -zxf fontconfig-2.4.2.tar.gz
cd fontconfig-2.4.2
./configure -prefix=/usr
make
make install <- Run as root or use sudo
}}}

Original comment by [email protected] on 21 Jun 2011 at 1:09

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

I would first make sure if developer version of fontconfig is installed 
properly before try the above suggesion.

Original comment by [email protected] on 21 Jun 2011 at 1:11

[GoogleCodeExporter]

Could you also try to include all FLTK libs to the project?
: like below
if(UNIX)

  target_link_libraries(paperCrop
        fltk_images
    fltk_forms
        fltk_gl
        GL
    fltk

Original comment by [email protected] on 21 Jun 2011 at 1:19

[GoogleCodeExporter]

fontconfig is the latest version (2.8.0-1) and installed with no conflicts with 
yum...

[alec@localhost ~]$ rpm -aq|grep fontconfig
mingw32-fontconfig-2.6.0-10.fc12.noarch
fontconfig-2.8.0-1.fc13.i686
fontconfig-devel-2.8.0-1.fc13.x86_64
fontconfig-2.8.0-1.fc13.x86_64

Original comment by [email protected] on 21 Jun 2011 at 1:27

[GoogleCodeExporter]

Added 

fltk_forms
fltk_gl
GL

same result...

Original comment by [email protected] on 21 Jun 2011 at 1:58

[GoogleCodeExporter]

Could you try again using the lastest svn? (after "svn revert .;svn up")

Original comment by [email protected] on 22 Jun 2011 at 12:08

[GoogleCodeExporter]

Same:

[100%] Building CXX object CMakeFiles/paperCrop.dir/utility/TextFile.cpp.o      


Linking CXX executable paperCrop                                                


/usr/bin/ld: 
/usr/lib/gcc/x86_64-redhat-linux/4.4.5/../../../../lib64/libfltk.so: undefined 
reference to symbol 'FcPatternAddInteger'                                       

/usr/bin/ld: note: 'FcPatternAddInteger' is defined in DSO 
/usr/lib64/libfontconfig.so.1 so try adding it to the linker command line
/usr/lib64/libfontconfig.so.1: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
make[2]: *** [paperCrop] Error 1
make[1]: *** [CMakeFiles/paperCrop.dir/all] Error 2
make: *** [all] Error 2

Original comment by [email protected] on 22 Jun 2011 at 4:38

[GoogleCodeExporter]

I am sorry but could you try again using the lastest svn? (after "svn revert 
.;svn up") If this doesn't work, please try rearranging library orders, and if 
that doesn't work, I think you may have to build fltk from source codes. I 
could try installing fedora here but it may take some time because I am rather 
too busy these days. 

Original comment by [email protected] on 22 Jun 2011 at 1:25

[GoogleCodeExporter]

Will try a couple of hours later today and write here...

Original comment by [email protected] on 22 Jun 2011 at 1:37

[GoogleCodeExporter]

Same stuff, plz see with configure output.

INCDIR=/usr/local/include
LIBDIR=/usr/local/lib
CC=gcc
PREFIX=/usr/local

possibly should autodetect on Fedora X86_64

INCDIR=/usr/include
LIBDIR=/usr/lib64
CC=gcc
PREFIX=/usr

?

Original comment by [email protected] on 22 Jun 2011 at 5:07

Attachments:

• compile.txt

[GoogleCodeExporter]

Could you please try again using the latest svn? I changed papercrop to use 
system installed poppler lib.

Original comment by [email protected] on 23 Jun 2011 at 5:15

[GoogleCodeExporter]

Now the error message changes:


[100%] Building CXX object CMakeFiles/paperCrop.dir/utility/TextFile.cpp.o      


Linking CXX executable paperCrop                                                


/usr/bin/ld: CMakeFiles/paperCrop.dir/image/ImageProcessor.cpp.o: undefined 
reference to symbol 'ilOverlayImage'                                            

/usr/bin/ld: note: 'ilOverlayImage' is defined in DSO /usr/lib64/libIL.so.1 so 
try adding it to the linker command line
/usr/lib64/libIL.so.1: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
make[2]: *** [paperCrop] Error 1
make[1]: *** [CMakeFiles/paperCrop.dir/all] Error 2
make: *** [all] Error 2

Original comment by [email protected] on 23 Jun 2011 at 5:27

Attachments:

• compile.txt

[GoogleCodeExporter]

Could you please try again using the latest svn?

Original comment by [email protected] on 23 Jun 2011 at 12:05

[GoogleCodeExporter]

Same:

[100%] Building CXX object CMakeFiles/paperCrop.dir/utility/TextFile.cpp.o      


Linking CXX executable paperCrop                                                


/usr/bin/ld: CMakeFiles/paperCrop.dir/image/ImageProcessor.cpp.o: undefined 
reference to symbol 'ilOverlayImage'                                            

/usr/bin/ld: note: 'ilOverlayImage' is defined in DSO /usr/lib64/libIL.so.1 so 
try adding it to the linker command line
/usr/lib64/libIL.so.1: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
make[2]: *** [paperCrop] Error 1
make[1]: *** [CMakeFiles/paperCrop.dir/all] Error 2
make: *** [all] Error 2

Original comment by [email protected] on 23 Jun 2011 at 12:41

Attachments:

• compile.txt

[GoogleCodeExporter]

Sorry, could you try again please?

Original comment by [email protected] on 23 Jun 2011 at 1:12

[GoogleCodeExporter]

Great! It compiles.

However, the gui is missing UTF8 support, please see the attached file.

Will be exploring for more issues.

Original comment by [email protected] on 23 Jun 2011 at 1:25

Attachments:

• screenshot-48.jpeg

[GoogleCodeExporter]

Great! UTF8 problem is a known issue for fltk1.1 branch. Fltk started to 
support utf8 starting from fltk1.3, and I will make transition to fltk1.3 as 
soon as it is supported by ubuntu. See if those files can be accessed through 
the command line or the referencer plugin. 
(command line: cd ~/bin/papercrop/papercrop_source;./paperCrop 
"filename='/home/taesoobear/Documents/가.pdf'")
On the other hand, UTF-8 PDFs are supported if it has english file name (though 
often requires embedded fonts). If it works reasonably well, than please upload 
the install script here so that I can upload. Thanks!

Original comment by [email protected] on 23 Jun 2011 at 1:46

[GoogleCodeExporter]

Just implemented a quick work-around which uses python native file chooser. 

Original comment by [email protected] on 23 Jun 2011 at 2:07

[GoogleCodeExporter]

Yes, it is operational. I will send more feedback when I spend more time with 
it. 

Attaching fedora installer.

Original comment by [email protected] on 23 Jun 2011 at 2:22

Attachments:

• fedora_installer.sh

[GoogleCodeExporter]

The fedora installer's missing poppler-dev. What's the package name there?

Original comment by [email protected] on 23 Jun 2011 at 3:23

[GoogleCodeExporter]

poppler-devel

However:
[alec@localhost ~]$ rpm -aq|grep  poppler
poppler-utils-0.12.4-6.fc13.x86_64
poppler-data-0.4.2-1.fc13.noarch
poppler-glib-0.12.4-6.fc13.x86_64
poppler-qt4-0.12.4-6.fc13.x86_64
poppler-0.12.4-6.fc13.x86_64
poppler-devel-0.12.4-6.fc13.x86_64

Original comment by [email protected] on 23 Jun 2011 at 3:49

[GoogleCodeExporter]

Original comment by [email protected] on 4 Aug 2011 at 3:22

• Changed state: Fixed