能提供下2.8版本的包么，我在macos上不知道为什么只能编译出2.7版本

求一个padavan版的n2n-V2, 请附上食用说明。谢谢

Hello,

I have tried to setup a connection between two window's pcs and two android devices (a phone and oculus quest 2). I have set my supernode hosted in an aws ec2 instance. I am able to connect all the edges to the supernode without issues, since I receive the ok message at the end in the console for the edge.exe and for the .apk provided by hin2n. I can ping just fine using the address that I set, both my windows edges computers. But I cannot do the same with the android devices.

I am bit lost on what to test next to identify the problem. In case someone could give me a hand, it would be highly appreciated!
Thanks!

我在寻找windows下的n2n v2.6版，
跌跌撞撞找了https://github.com/lucktu/n2n/tree/master/Windows，
但不知道怎么用这里的文件，
我是要利用这些文件重新编译吗？

群晖搭建 n2n supernode edge之间相互ping不通

是还需要做什么额外的配置么？有没有相关的教程

佬大N2N可以添加以服务方式自启，现在每次N2N开机都需要登录系统才能启动，谢谢哦

n2n_v2s版节点服务器已正常可以用
现想要在mac catalina 运行n2n_v2s客户端,请问如何操作？

感谢！

Win10不能正常运行运行一会闪退，win11正常，求大神指点。V3.1.1版本。

有个PS4版本的hamacHi，能用于PS4局域网游戏联机，不过hamchi在**境内登陆不了。
https://github.com/sleirsgoevy/ps4-hamachi/
如果能有PS4版本的N2N客户端就好了

请问macbook m1能编译吗

如图

文件在这https://github.com/LomotHo/n2n-releases/releases
当然也可以通过brew安装 brew install lomotho/taps/n2n，项目主页介绍了使用方法

单位电脑安装easyn2n（n2n-v2版本），家里联通内网，路由器刷的koolshare梅林，家里电脑安装的easyn2n（n2n-v2版本）。
1、单位电脑可以访问家里电脑
2、路由器安装n2n_v2_linux_arm_v2.7.0_r525_all_by_heiye.zip成功，能够开机启动n2n，路由器可以ping通单位电脑和家里电脑的虚拟局域网ip
3、无论家里还是单位电脑均无法通过虚拟局域网ip访问路由器网页。

奇怪的是我查看路由器开放端口，通过4个IP（路由器对内部局域网的IP、路由器获取的联通内部IP、真实的联通公网IP、虚拟局域网的IP）发现端口均不一致，路由器开放的18181端口，仅在路由器获取的联通内部IP显示开放，在虚拟局域网并没有开放。
不知道是何原因。

朋友在外国，回国网络受到很严重的干扰

n2n create
04/Dec/2021 23:48:18 [edge_utils.c:3627] ROUTE CMD = 'route add 192.168.111.0/23 10.0.0.1 if 6 > nul'

but shutting down
04/Dec/2021 23:48:28 [edge_utils.c:3627] ROUTE CMD = 'route delete 128.99.30.0/0 32.92.30.0 if 6 > nul'

Any idea why I get the following error?

C:\n2n\n2n_v3_windows_x64_v2.9.0_r747_static_by_Tim\x64>edge.exe -a 10.10.10.1 -c 111 -k 123 -l n2n.lucktu.com:10086
27/Jan/2021 18:36:00 [n2n.c:278] WARNING: Failed to resolve supernode host n2n.lucktu.com
27/Jan/2021 18:36:00 [edge_utils.c:2764] WARNING: Invalid socket
27/Jan/2021 18:36:00 [edge.c:405] WARNING: Too many supernodes!

C:\n2n\n2n_v3_windows_x64_v2.9.0_r747_static_by_Tim\x64>pause
Appuyez sur une touche pour continuer...

My friend is trying to connect to my supernode, but on the server, it keeps showing assign IP 10.157.41.41/24 to tap adapter of edge but does not show "updated edge", [2022-11-17 13:23:07] [OK] edge <<< ================ >>> supernode is shown on client, I wonder why this is happening and how I can fix this

rar: https://github.com/lucktu/n2n/blob/master/Linux/n2n_v3_linux_x86_v3.1.1-16_r1200_all_by_heiye.tar

昨天在 centos7.6 上使用 官方代码(稳定版)进行编译安装后进行测试是可用的
我将配置文件拷贝至本地进行测试

使用版本 supernode
Welcome to n2n v.3.1.1-16-g23e168b-dirty-r1200 x64_static for Windows
Built on May 8 2022 23:43:56

运行后输出以下内容后程序退出

01/Jun/2022 14:07:36 [supernode.c:268] the network range for community ip address service is '172.16.0.0...172.32.255.0/24'
01/Jun/2022 14:07:36 [sn_utils.c:395] added allowed community 'mynetwork' [total: 1]
01/Jun/2022 14:07:36 [sn_utils.c:1296] assigned sub-network 172.26.148.0/24 to community 'mynetwork'
01/Jun/2022 14:07:36 [sn_utils.c:395] added allowed community 'netleo' [total: 2]
01/Jun/2022 14:07:36 [sn_utils.c:1296] assigned sub-network 172.26.204.0/24 to community 'netleo'
01/Jun/2022 14:07:36 [sn_utils.c:340] added user 'logan' with public key 'nHWum+r42k1qDXdIeH-WFKeylK5UyLStRzxofRNAgpG' to community 'netleo'
01/Jun/2022 14:07:36 [sn_utils.c:370] added regular expression for allowed communities 'ntop[0-1][0-9]'
01/Jun/2022 14:07:36 [sn_utils.c:440] loaded 2 fixed-name communities from supernode_list.conf
01/Jun/2022 14:07:36 [sn_utils.c:443] loaded 1 regular expressions for community name matching from supernode_list.conf
01/Jun/2022 14:07:36 [sn_utils.c:115] started shared secrets calculation for edge authentication
01/Jun/2022 14:07:36 [sn_utils.c:131] calculated shared secrets for edge authentication
01/Jun/2022 14:07:36 [sn_utils.c:140] calculating dynamic keys

netstat 与 任务管理器均未检测到程序继续运行
我使用 edge > 连接至linux上运行的服务端同样也无法连接
以下是我所使用的配置
supernode.conf

-p 7655
-a 172.16.0.0-172.32.255.0/24
-v
-F N2N_NN_A
-c supernode_list.conf

supernode_list.conf

# ---------------------------
#
#      these could either be fixed-name communities such as the following lines ...
#
mynetwork
netleo
* logan nHWum+r42k1qDXdIeH-WFKeylK5UyLStRzxofRNAgpG
#
#      ... or regular expressions that a community name must fully match
#      such as ntop[0-1][0-9] for communities from "ntop00" through "ntop19"
# 
ntop[0-1][0-9]

edge.conf

-c netleo
-l  ###:7655
-I logan
-J 007
-A5
-k mySecretKey
-P Y93Jn9AONIZWaeqekna2CJIOLZEejhU29dXFeeQLQJC
-vvvvv

你好能不能问一下我在启动服务端的时候有一个管理端口是怎么使用的，有相关的文档吗（无论什么语言）

已经编译好v3.0的FreeBSD版本，但是有一些严重的问题
第一，无法保持在前台运行，并且输出有些排版问题
第二，kill掉edge进程之后，会造成FreeBSD无法上网，需要重启网络
https://github.com/Alex6357/n2n-for-FreeBSD

时间貌似错误了

NOTE for n2n_v3 (https://github.com/ntop/n2n):
2022-05-25: v.3.1.1_r1210(-26-g99b6b6b), Start making route and upnp as separate programs

2023-05-25: v.3.1.1_r1210(-26-g99b6b6b), Start making route and upnp as separate programs

您好，客户端二进制文件被Windows defender查杀了，是否有考虑重新加壳呢？

系统：iOS 15.2.1
手机：iphone 13

1. 保存过后，再次编辑，会发现除了密码，其他字段全部不可见了，但是值还在。
2. 左上角的时间和右上角的手机信号、wifi等图标没了。
3. 同样的设置Android客户端能连上，但是ios却一直连不上，没有出现vpn连接。以下是连接的日志：
   

4.终止连接以后，无法再次点击上面的按钮重新连接，必须kill掉，重新进入app才可以。