makeict / mcp-client Goto Github PK

espressif/esp-idf#1096
espressif/esp-idf#4585

Add support for WS2812 RGB LEDS for client status display.

Add hardware for ethernet connection.

• Alarm arm button
• Arm countdown/warning
• Delayed arm

Add the ability to set hostname and static IP for better network management. Should probably be a configuration option, but hostname could default to mcp_client_<client_id> or something along those lines.

OTA updates will be necessary to reduce update workload as the number of active clients increases.

Need to re-add the button that arms the alarm system. Ideally this would be via a dedicated module connected to the alarmsystem that handles all arm/disarm requests for MCP.

Arming via Keyswitch

• all zones (doors and motions) are immediately armed.
• the last discussed plan was to have a button push in MCP have a delay of maybe a minute before arming via keyswitch. Some kind of countdown or warning is needed.
• MCP would wait up to 3 minutes, check system is armed and if not attempt arming again.
• MCP would wait another duration, check system and attempt another re-arm
• MCP would check a final time and send notification at arm failed.

Add an option to write logs to SD for debugging. Will need to be considerate of write frequency.