mateogreil / homeassistant-comwatt Goto Github PK

Bonjour,

(je suis novice sur GitHub donc désolé si je n'ai pas les codes usuels par ici).
J'ai réussi tant bien que mal à installer manuellement Comwatt sur mon Home Assistant.

J'ai une box Comwatt gen 4, la connexion a bien été établie, tout fonctionne sur le site de Comwatt et pourtant, sur Home Assistant, aucun appareil ni entité ne sont remontés donc l'interconnexion n'apporte rien en l'état.
Est-ce lié au fait que le module n'est plus fonctionnel ou un soucis de paramétrage chez moi ?

Merci par avance.
Cordialement

Description:

Currently, the ComwattEnergySensor is being updated every two minutes, which is not necessary since the data from the Comwatt API is only refreshed once per hour. To optimize resource usage and reduce unnecessary calls, it is recommended to adjust the update frequency to once per hour.

Suggested Solution:

Utilize the DataUpdateCoordinator to implement polling at an hourly interval, as suggested in the Home Assistant documentation here.

Describe the bug
Old devices, that are removed from comwatt, are still available on HomeAssistant.

Expected behavior
These devices should be removed from HomeAssistant.

When I use electric plugs, there are three entities : Power, Total Power and the switch.
But when I add a remote module (with same functionnalities in ComWatt app) only Power and Total Power are available.

I hope the module and the plug use the same protocol and that you can fixe this quickly...

Thanks for your help and work.

Can you add the internal switch from Comwatt ? There are two internal relays inside the comwatt.
I have juste updated your last version and I can see and manage the Wifi relay, But I can't see the internal relay.

Thanks by adance
Fred

Description

Currently, the API client for Comwatt is stored directly within each sensor. However, this approach leads to a large number of clients in the application when a disconnection occurs, as each sensor needs a new client instance.

Issue Details

Challenge: The current implementation results in a high number of clients, which is not optimal for resource management.

Suggested Solution: Following the Home Assistant best practices here, consider storing a single API client in the Home Assistant data instead of within each sensor. This will lead to a more efficient use of resources.

Comment et quand se fait la mise à jours du statut des switches dans HA ? Par exemple dans Comwatt le switch interne 1 est sur ON ( à partir de 8h par le calendrier de comwatt (pour le moment)) mais dans HA le statut est OFF

Merci

Hello, I had this add on running and working perfectly (thank you btw!) but as of 01/01/2024, there is no entities showing up anymore. I tried reinstalling both HACS and the comwatt add-on without success. Coincidentally, I called up the Comwatt SAV because my G4 box had problems connecting to the cloud for a couple of days after 01/01/2024 and the Comwatt SAV monsieur said that they had been doing some MAJs. So Just wanted to check if I am the only one currently having issues or if it is a general thing? Cheers guys keep up the good work!

Good morning,

First of all, thank you very much for developing this integration and for assisting with the issues. Unfortunately, I can't seem to install it.

Once I add the repository to HACS, when I try to install it, I get this message in Home Assistant:

Error
This integration does not support configuration via the UI. If you followed this link from the Home Assistant website, make sure you are running the latest version of Home Assistant.

I've tried it several times, restarting HA and nothing. My HA is fully updated (maybe that's the problem?). I don't know if I'm doing something wrong, but I can't get it to work. If it's my fault for doing something wrong, I apologize; I'm new to Home Assistant and maybe I need to do something that I don't know.

In any case, thank you very much for the help.

Bonjour Mathéo,
Merci encore pour l’évolution en 0.2.1, cela fonctionne vraiment très bien, j’ai pu prendre la main sur tous les composants ComWatt et définir mes propres algorithmes.

Par contre ces composants sont tous limités à 16A et je voulais absolument avoir un compteur de consommation pour la voiture, j’ai donc utilisé un switch de marque Tongon (vu par HA comme un TUYA SY2 WiFi switch with metering ).

Penses tu possibles de remonter les informations (état du switch, consomation / 24h …) de ce switch dans la console Comwatt ?

Bonne journée

Bonjour,

Est ce qu'il serait possible de pouvoir récupérer toutes les données disponibles sur le site de comwat, car dans mon dashboard Energy j'ai seulement les données à partir du jour ou j'ai intégré comwatt à HA.

Merci d'avance.

Description

Currently, the ComwattEnergySensor is updated with the current date, but the data retrieved from the API corresponds to the previous hour. This results in a one-hour offset in Home Assistant.

Issue Details

Problem Description: The current implementation causes a time misalignment between the sensor update time and the actual data retrieved from the API.

Suggested Solution: To address this issue and ensure accurate time synchronization, it is recommended to utilize the DataUpdateCoordinator as described in the Home Assistant documentation here.

Comwatt currently provides two switches to enable or disable devices. The first switch toggles between the "planning" and "manual" modes. In "planning" mode, Comwatt autonomously manages the activation and deactivation of the device based on a predefined schedule created on their interface. The "manual" mode allows users to manually control the device, overriding Comwatt's automatic management.

The second switch controls the "on/off" mode, and it can only be modified when the integration is set to "manual" mode.

Bonjour

Je pense être sur une version antérieure à la Gen4 du coup mes codes d'accès ne fonctionnent pas.Je me connecte avec mail et mdp.

Je vous mets l'image de l'appli que j'utilise.

Cordialement
Franck

Hello and thanks a lot for this addon!

I don't seem to be able to indicate the right sensor for my solar production, which I think should be this one [sensor.solaire_en_autoproduction_power] but which has a POWER class and not ENERGY (to view it in the "Energy distribution" graph).

I only have these choices, but they don't seem to be the right ones?

Would I need another version of [sensor.solaire_en_autoproduction_power] as well, but with an "energy" class?

Thanks