megabyte875 / ruta_demo

Ruta demo

Ruta Demo

Why Ruta

• https://mp.weixin.qq.com/s/ah7O82IuydHSmBhM1RA2Fg
• https://mp.weixin.qq.com/s/w_weqkLNLXyoPCsguvfQxg

Notice

• This is a demo lab for ruta project.
• ETCD connections are encrypted with TLS.
• Dataplane encapsulation changes to cleartext mode.
• Dataplane disable DPDK support for easy deployment and limit performance.
• This project is written by golang, we could support multiple platform include X86/ARM/MIPS
• This demo is verified by Unbuntu 20.04 only.

Chinese version Demo guide

https://mp.weixin.qq.com/s/L1Svw3D3nnCcrgkqAlFEfA

1. IP address and topology

The pre-configed topology shows as below:

Hostname	Address
ETCD1	192.168.99.71
ETCD2	192.168.99.72
ETCD3	192.168.99.73
STUN1	192.168.99.74
Fabric1	192.168.99.75
Fabric2	192.168.99.76
Linecard1	192.168.99.77
Linecard2	192.168.99.78
Operation	192.168.99.79

You can modify the configuration file in each component.

2. Installation

git clone or directly download all files to /opt/ruta_demo

cd /opt
git clone https://www.github.com/zartbot/ruta_demo

3. Create certification

cd /opt/ruta_demo
./01_generate_cert.sh

notice

• Certificate MUST be generated ONCE!
• Then you MUST copy /opt/ruta_demo/cert fold to other VMs on the same path
• The certificate path in the other binary file("stun"/"fabric"/"linecard") are hardcoded as "/opt/ruta_demo/cert"
• If you need deploy etcd cluster with other IP address, you must change the "hosts" section in "cert_cfg/server-csr.json"

  "hosts": [
    "localhost",
    "0.0.0.0",
    "192.168.99.71",
    "192.168.99.72",
    "192.168.99.73"
  ],

4. Setup ETCD Cluster

on ETCD1

cd /opt/ruta_demo
./start_etcd1.sh

on ETCD2

cd /opt/ruta_demo
./start_etcd2.sh

on ETCD3

cd /opt/ruta_demo
./start_etcd1.sh

notice

• IP address information are defined in "etcd/etcdX.yaml"

5. Start STUN Service

on STUN1

cd /opt/ruta_demo/stun
./stun 

• you could change the config in conf.yaml or defined your config.yaml by using ./stun -c=your_config.yaml
• STUN service must have a public IP address or behind 1:1 NAT
• SRLOC is encoded by the following fields, you MUST defined correct Private/Public IP Address

srloc: [ INET|1000|1000|192.168.99.74:5555|192.168.99.74:5555]
         COLOR | UP_LINK_BW(Mbps) | DOWN_LINK_BW(Mbps) | Private_IP_Address:Port | Public_IP_Address:Port 

6. Start Fabric Service

on Fabric1(192.168.99.75)

cd /opt/ruta_demo/fabric
./fabric -c=fabric1.yaml

on Fabric2(192.168.99.76)

cd /opt/ruta_demo/fabric
./fabric -c=fabric2.yaml

7. Start Linecard service

on Linecard1(192.168.99.77)

cd /opt/ruta_demo/linecard
./veth_lc1.sh
sudo ./linecard -c=lc1.yaml
./ping_gw.sh

on Linecard2(192.168.99.78)

cd /opt/ruta_demo/linecard
./veth_lc2.sh
sudo ./linecard -c=lc2.yaml
./ping_gw.sh
./ping_lc1.sh

8. Ops

cd /opt/ruta_demo/ops
./monitor
./listen