mfkiwl / telemetryrocket2 Goto Github PK

This is a design for a 2-stage model rocket that will boost a basic 
ESP32-based telemetry board (accelerometer, altimeter, barometric pressure 
sensor, and temperature sensor, along with a real time clock).  The telemetry 
readings are saved on a MicroSD card on the TTGO-T1 board using its MicroSD 
slot. The system is powered by a LiPo battery while in flight and the integrated
battery charger on the TTGO-T1 board is used to charge the battery via the 
micro-B USB connector.  The sketch uses the USB connection for serial communication
to set the RTC and open the log file.

The first stage has a four engine cluster, with 1 E12-0 and three D12-3 
engines.  The second stage takes one E12-8 engine.

Both stages have parachute recovery.  The first stage has three (small) parachutes 
above the outer three engines.  The upper stage has a single (large) parachute.