mltframework / mlt-scripts Goto Github PK

Tried to build the melt docker container but it fails due to missing sdl2 package.

Here are the last output lines:

checking for FFTW3... yes
checking for SDL2... no
configure: error: Package requirements (sdl2) were not met:

No package 'sdl2' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables SDL2_CFLAGS
and SDL2_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
ERROR: Unable to configure movit
LOG: Process has finished. Reason: FAILURE Some kind of error occured: Unable to configure movit
The command '/bin/sh -c bash /tmp/build-melt.sh -c /tmp/build-melt.conf' returned a non-zero code: 255

Hi

I ran the build-melt.sh script on my Raspberri Pi 3 B+ and I got this result:

...
checking for stdint.h... yes
checking for unistd.h... yes
checking whether byte ordering is bigendian... no
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for SRC... no
configure: error: Package requirements (samplerate) were not met:

No package 'samplerate' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables SRC_CFLAGS
and SRC_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
ERROR: Unable to configure rubberband
LOG: Process has finished. Reason: FAILURE Some kind of error occured: Unable to configure rubberband

I couldn't find where the simplerate project is to get the code and compile myself. Please help.

I'm trying to build MLT on CentOs6 -- is it actually possible?

I already had frei0r installed, but the MLT build script kept blowing up on it, so I disabled it in the build script.

Now I'm getting

g++ -DQT_SHARED -I/usr/include/QtCore -I/usr/include/QtGui -I/usr/include/QtXml -I/usr/include/QtSvg -I/usr/include/QtOpenGL  -I../.. -I/root/melted/20140712/include -DARCH_X86_64 -Wall -DPIC   -O2 -pipe -ffast-math -DUSE_MMX -DUSE_SSE -DUSE_SSE2 -g -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -fPIC -pthread -DARCH_X86_64 -Wall -DPIC   -O2 -pipe -ffast-math -DUSE_MMX -DUSE_SSE -DUSE_SSE2 -g -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -fPIC -pthread -DARCH_X86_64 -Wall -DPIC   -O2 -pipe -ffast-math -DUSE_MMX -DUSE_SSE -DUSE_SSE2 -g -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -fPIC -pthread  -DUSE_EXIF  -Wno-deprecated   -c -o consumer_qglsl.o consumer_qglsl.cpp
g++ -DQT_SHARED -I/usr/include/QtCore -I/usr/include/QtGui -I/usr/include/QtXml -I/usr/include/QtSvg -I/usr/include/QtOpenGL  -I../.. -I/root/melted/20140712/include -DARCH_X86_64 -Wall -DPIC   -O2 -pipe -ffast-math -DUSE_MMX -DUSE_SSE -DUSE_SSE2 -g -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -fPIC -pthread -DARCH_X86_64 -Wall -DPIC   -O2 -pipe -ffast-math -DUSE_MMX -DUSE_SSE -DUSE_SSE2 -g -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -fPIC -pthread -DARCH_X86_64 -Wall -DPIC   -O2 -pipe -ffast-math -DUSE_MMX -DUSE_SSE -DUSE_SSE2 -g -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -fPIC -pthread  -DUSE_EXIF  -Wno-deprecated   -c -o producer_qtext.o producer_qtext.cpp
common.cpp: In function 'bool createQApplicationIfNeeded(mlt_service_s*)':
** common.cpp:32: error: 'getenv' was not declared in this scope **
make[2]: *** [common.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[2]: Leaving directory `/root/melted/src/mlt/src/modules/qt'
make[1]: *** [all] Error 1
make[1]: Leaving directory `/root/melted/src/mlt/src/modules'
make: *** [all] Error 1
ERROR: Unable to build mlt
LOG: Process has finished. Reason: FAILURE Some kind of error occured: Unable to build mlt

but when I add

#include <stdlib.h>

into ~/melted/src/mlt/src/modules/qt/common.cpp, the code is overwritten with un-edited code (so losing my edit) and the error happens again.

How can I fix this? I am really anxious to use MLT as it seems to be exactly what I need!

Thank you,
~Todd

LOG: Wed Jun 1 04:58:11 CEST 2016
LOG: ./build-kdenlive.sh starting
LOG: Using none for feedback
WARN: Unable to read config file build-kdenlive.conf
LOG: Checking for sudo requirement
LOG: Done checking for sudo requirement
LOG: Process has finished. Reason: ABORTED User requested abort
LOG: Number of steps determined to 51
LOG: Total number of steps needed to complete 51
LOG: Press Ctrl+C to abort
LOG: Number of steps completed : 0
LOG: About to run command: kf5-config -v
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
Qt: 5.5.1
KDE Frameworks: 5.18.0
kf5-config: 1.0
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
LOG: Cleaning out all subdirs
LOG: About to run command: cd /home/carlos/kdenlive/src
./build-kdenlive.sh: line 297: cd: /home/carlos/kdenlive/src: No such file or directory
LOG: About to run command: cd /home/carlos/kdenlive/src
LOG: Make clean for vid.stab called
LOG: Cleaning out sources for vid.stab
LOG: About to run command: pushd .
~/kdenlive/src ~/kdenlive/src
LOG: About to run command: cd vid.stab
./build-kdenlive.sh: line 297: cd: vid.stab: No such file or directory
LOG: Cleaned up in vid.stab
LOG: Number of steps completed : 1
LOG: About to run command: popd
~/kdenlive/src
LOG: Make clean for lame called
LOG: Cleaning out sources for lame
LOG: About to run command: pushd .
~/kdenlive/src ~/kdenlive/src
LOG: About to run command: cd lame
./build-kdenlive.sh: line 297: cd: lame: No such file or directory
LOG: Cleaned up in lame
LOG: Number of steps completed : 2
LOG: About to run command: popd
~/kdenlive/src
LOG: Make clean for libvpx called
LOG: Cleaning out sources for libvpx
LOG: About to run command: pushd .
~/kdenlive/src ~/kdenlive/src
LOG: About to run command: cd libvpx
./build-kdenlive.sh: line 297: cd: libvpx: No such file or directory
LOG: Cleaned up in libvpx
LOG: Number of steps completed : 3
LOG: About to run command: popd
~/kdenlive/src
LOG: Make clean for x264 called
LOG: Cleaning out sources for x264
LOG: About to run command: pushd .
~/kdenlive/src ~/kdenlive/src
LOG: About to run command: cd x264
./build-kdenlive.sh: line 297: cd: x264: No such file or directory
LOG: Cleaned up in x264
LOG: Number of steps completed : 4
LOG: About to run command: popd
~/kdenlive/src
LOG: Make clean for libepoxy called
LOG: Cleaning out sources for libepoxy
LOG: About to run command: pushd .
~/kdenlive/src ~/kdenlive/src
LOG: About to run command: cd libepoxy
./build-kdenlive.sh: line 297: cd: libepoxy: No such file or directory
LOG: Cleaned up in libepoxy
LOG: Number of steps completed : 5
LOG: About to run command: popd
~/kdenlive/src
LOG: Make clean for eigen called
LOG: Cleaning out sources for eigen
LOG: About to run command: pushd .
~/kdenlive/src ~/kdenlive/src
LOG: About to run command: cd eigen
./build-kdenlive.sh: line 297: cd: eigen: No such file or directory
LOG: Cleaned up in eigen
LOG: Number of steps completed : 6
LOG: About to run command: popd
~/kdenlive/src
LOG: Make clean for movit called
LOG: Cleaning out sources for movit
LOG: About to run command: pushd .
~/kdenlive/src ~/kdenlive/src
LOG: About to run command: cd movit
./build-kdenlive.sh: line 297: cd: movit: No such file or directory
LOG: Cleaned up in movit
LOG: Number of steps completed : 7
LOG: About to run command: popd
~/kdenlive/src
LOG: Make clean for frei0r called
LOG: Cleaning out sources for frei0r
LOG: About to run command: pushd .
~/kdenlive/src ~/kdenlive/src
LOG: About to run command: cd frei0r
./build-kdenlive.sh: line 297: cd: frei0r: No such file or directory
LOG: Cleaned up in frei0r
LOG: Number of steps completed : 8
LOG: About to run command: popd
~/kdenlive/src
LOG: Make clean for FFmpeg called
LOG: Cleaning out sources for FFmpeg
LOG: About to run command: pushd .
~/kdenlive/src ~/kdenlive/src
LOG: About to run command: cd FFmpeg
./build-kdenlive.sh: line 297: cd: FFmpeg: No such file or directory
LOG: Cleaned up in FFmpeg
LOG: Number of steps completed : 9
LOG: About to run command: popd
~/kdenlive/src
LOG: Make clean for mlt called
LOG: Cleaning out sources for mlt
LOG: About to run command: pushd .
~/kdenlive/src ~/kdenlive/src
LOG: About to run command: cd mlt
./build-kdenlive.sh: line 297: cd: mlt: No such file or directory
LOG: Cleaned up in mlt
LOG: Number of steps completed : 10
LOG: About to run command: popd
~/kdenlive/src
LOG: Make clean for kdenlive called
LOG: Cleaning out sources for kdenlive
LOG: About to run command: pushd .
~/kdenlive/src ~/kdenlive/src
LOG: About to run command: cd kdenlive
./build-kdenlive.sh: line 297: cd: kdenlive: No such file or directory
LOG: Cleaned up in kdenlive
LOG: Number of steps completed : 11
LOG: About to run command: popd
~/kdenlive/src
LOG: Done cleaning out in source dirs
LOG: Getting all sources
LOG: Changing to /home/carlos/kdenlive/src
LOG: Getting or updating source for vid.stab - this could take some time
LOG: About to run command: pushd .
~/kdenlive/src ~/kdenlive/src
LOG: Cloning git sources for vid.stab
LOG: About to run command: git --no-pager clone git://github.com/georgmartius/vid.stab.git
Cloning into 'vid.stab'...
remote: Counting objects: 1366, done.
remote: Total 1366 (delta 0), reused 0 (delta 0), pack-reused 1366
Receiving objects: 100% (1366/1366), 537.71 KiB | 510.00 KiB/s, done.
Resolving deltas: 100% (909/909), done.
Checking connectivity... done.
LOG: About to run command: cd vid.stab
LOG: About to run command: git checkout
Your branch is up-to-date with 'origin/master'.
LOG: Done getting or updating source for vid.stab
LOG: Number of steps completed : 12
LOG: About to run command: popd
~/kdenlive/src
LOG: Getting or updating source for lame - this could take some time
LOG: About to run command: pushd .
~/kdenlive/src ~/kdenlive/src
LOG: Downloading archive for lame
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 345 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 1411k 100 1411k 0 0 667k 0 0:00:02 0:00:02 --:--:-- 1271k
LOG: About to run command:
LOG: About to run command: mv lame-3.99.5 lame
LOG: Done getting or updating source for lame
LOG: Number of steps completed : 13
LOG: About to run command: popd
~/kdenlive/src
LOG: Getting or updating source for libvpx - this could take some time
LOG: About to run command: pushd .
~/kdenlive/src ~/kdenlive/src
LOG: Cloning git sources for libvpx
LOG: About to run command: git --no-pager clone https://chromium.googlesource.com/webm/libvpx.git
Cloning into 'libvpx'...
remote: Sending approximately 57.69 MiB ...
remote: Counting objects: 1370, done
remote: Finding sources: 100% (75/75)
remote: Total 115702 (delta 89814), reused 115687 (delta 89814)
Receiving objects: 100% (115702/115702), 57.51 MiB | 2.04 MiB/s, done.
Resolving deltas: 100% (89814/89814), done.
Checking connectivity... done.
LOG: About to run command: cd libvpx
LOG: About to run command: git checkout
Your branch is up-to-date with 'origin/master'.
LOG: Done getting or updating source for libvpx
LOG: Number of steps completed : 14
LOG: About to run command: popd
~/kdenlive/src
LOG: Getting or updating source for x264 - this could take some time
LOG: About to run command: pushd .
~/kdenlive/src ~/kdenlive/src
LOG: Cloning git sources for x264
LOG: About to run command: git --no-pager clone git://repo.or.cz/x264.git
Cloning into 'x264'...
remote: Counting objects: 19301, done.
remote: Compressing objects: 100% (3333/3333), done.
remote: Total 19301 (delta 15925), reused 19236 (delta 15925)
Receiving objects: 100% (19301/19301), 4.62 MiB | 1.75 MiB/s, done.
Resolving deltas: 100% (15925/15925), done.
Checking connectivity... done.
LOG: About to run command: cd x264
LOG: About to run command: git checkout
Your branch is up-to-date with 'origin/master'.
LOG: Done getting or updating source for x264
LOG: Number of steps completed : 15
LOG: About to run command: popd
~/kdenlive/src
LOG: Getting or updating source for libepoxy - this could take some time
LOG: About to run command: pushd .
~/kdenlive/src ~/kdenlive/src
LOG: Cloning git sources for libepoxy
LOG: About to run command: git --no-pager clone git://github.com/anholt/libepoxy.git
Cloning into 'libepoxy'...
remote: Counting objects: 1412, done.
remote: Total 1412 (delta 0), reused 0 (delta 0), pack-reused 1412
Receiving objects: 100% (1412/1412), 1.67 MiB | 948.00 KiB/s, done.
Resolving deltas: 100% (905/905), done.
Checking connectivity... done.
LOG: About to run command: cd libepoxy
LOG: About to run command: git checkout
Your branch is up-to-date with 'origin/master'.
LOG: Done getting or updating source for libepoxy
LOG: Number of steps completed : 16
LOG: About to run command: popd
~/kdenlive/src
LOG: Getting or updating source for eigen - this could take some time
LOG: About to run command: pushd .
~/kdenlive/src ~/kdenlive/src
LOG: Downloading archive for eigen
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 1461k 100 1461k 0 0 694k 0 0:00:02 0:00:02 --:--:-- 1129k
LOG: About to run command:
LOG: About to run command: mv eigen-eigen-07105f7124f9 eigen
LOG: Done getting or updating source for eigen
LOG: Number of steps completed : 17
LOG: About to run command: popd
~/kdenlive/src
LOG: Getting or updating source for movit - this could take some time
LOG: About to run command: pushd .
~/kdenlive/src ~/kdenlive/src
LOG: Cloning git sources for movit
LOG: About to run command: git --no-pager clone http://git.sesse.net/movit/
Cloning into 'movit'...
remote: Counting objects: 3870, done.
remote: Compressing objects: 100% (2948/2948), done.
remote: Total 3870 (delta 2839), reused 1265 (delta 913)
Receiving objects: 100% (3870/3870), 804.88 KiB | 0 bytes/s, done.
Resolving deltas: 100% (2839/2839), done.
Checking connectivity... done.
LOG: About to run command: cd movit
LOG: About to run command: git checkout
Your branch is up-to-date with 'origin/master'.
LOG: Done getting or updating source for movit
LOG: Number of steps completed : 18
LOG: About to run command: popd
~/kdenlive/src
LOG: Getting or updating source for frei0r - this could take some time
LOG: About to run command: pushd .
~/kdenlive/src ~/kdenlive/src
LOG: Cloning git sources for frei0r
LOG: About to run command: git --no-pager clone git://github.com/dyne/frei0r.git
Cloning into 'frei0r'...
remote: Counting objects: 4070, done.
remote: Total 4070 (delta 0), reused 0 (delta 0), pack-reused 4070
Receiving objects: 100% (4070/4070), 1.71 MiB | 986.00 KiB/s, done.
Resolving deltas: 100% (2460/2460), done.
Checking connectivity... done.
LOG: About to run command: cd frei0r
LOG: About to run command: git checkout
Your branch is up-to-date with 'origin/master'.
LOG: Done getting or updating source for frei0r
LOG: Number of steps completed : 19
LOG: About to run command: popd
~/kdenlive/src
LOG: Getting or updating source for FFmpeg - this could take some time
LOG: About to run command: pushd .
~/kdenlive/src ~/kdenlive/src
LOG: Cloning git sources for FFmpeg
LOG: About to run command: git --no-pager clone git://github.com/FFmpeg/FFmpeg.git
Cloning into 'FFmpeg'...
remote: Counting objects: 476763, done.
remote: Compressing objects: 100% (24/24), done.
remote: Total 476763 (delta 4), reused 0 (delta 0), pack-reused 476739
Receiving objects: 100% (476763/476763), 161.40 MiB | 1.67 MiB/s, done.
Resolving deltas: 100% (372364/372364), done.
Checking connectivity... done.
LOG: About to run command: cd FFmpeg
LOG: About to run command: git checkout
Your branch is up-to-date with 'origin/master'.
LOG: Done getting or updating source for FFmpeg
LOG: Number of steps completed : 20
LOG: About to run command: popd
~/kdenlive/src
LOG: Getting or updating source for mlt - this could take some time
LOG: About to run command: pushd .
~/kdenlive/src ~/kdenlive/src
LOG: Cloning git sources for mlt
LOG: About to run command: git --no-pager clone git://github.com/mltframework/mlt.git
Cloning into 'mlt'...
remote: Counting objects: 36186, done.
remote: Total 36186 (delta 0), reused 0 (delta 0), pack-reused 36186
Receiving objects: 100% (36186/36186), 18.44 MiB | 1.88 MiB/s, done.
Resolving deltas: 100% (22253/22253), done.
Checking connectivity... done.
LOG: About to run command: cd mlt
LOG: About to run command: git checkout
Your branch is up-to-date with 'origin/master'.
LOG: Done getting or updating source for mlt
LOG: Number of steps completed : 21
LOG: About to run command: popd
~/kdenlive/src
LOG: Getting or updating source for kdenlive - this could take some time
LOG: About to run command: pushd .
~/kdenlive/src ~/kdenlive/src
LOG: Cloning git sources for kdenlive
LOG: About to run command: git --no-pager clone git://anongit.kde.org/kdenlive.git
Cloning into 'kdenlive'...
remote: Counting objects: 76452, done.
remote: Compressing objects: 100% (17782/17782), done.
remote: Total 76452 (delta 62315), reused 71927 (delta 58507)
Receiving objects: 100% (76452/76452), 30.79 MiB | 1.83 MiB/s, done.
Resolving deltas: 100% (62315/62315), done.
Checking connectivity... done.
LOG: About to run command: cd kdenlive
LOG: About to run command: git checkout
Your branch is up-to-date with 'origin/master'.
LOG: Done getting or updating source for kdenlive
LOG: Number of steps completed : 22
LOG: About to run command: popd
~/kdenlive/src
LOG: Done getting all sources

uname -a at time of compilation:
Linux carlosnewmusic-portatil-linux 4.4.0-23-generic #41-Ubuntu SMP Mon May 16 23:04:25 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
Information about cc at the time of compilation:
Using built-in specs.
COLLECT_GCC=cc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/5/lto-wrapper
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu 5.3.1-14ubuntu2.1' --with-bugurl=file:///usr/share/doc/gcc-5/README.Bugs --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-5 --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-libmpx --enable-plugin --with-system-zlib --disable-browser-plugin --enable-java-awt=gtk --enable-gtk-cairo --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-5-amd64/jre --enable-java-home --with-jvm-root-dir=/usr/lib/jvm/java-1.5.0-gcj-5-amd64 --with-jvm-jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-5-amd64 --with-arch-directory=amd64 --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu
Thread model: posix
gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2.1)
/usr/bin/dpkg
Found dpkg - running dpkg -l to grep libc6
ii libc6:amd64 2.23-0ubuntu3 amd64 GNU C Library: Shared libraries
ii libc6:i386 2.23-0ubuntu3 i386 GNU C Library: Shared libraries
ii libc6-dbg:amd64 2.23-0ubuntu3 amd64 GNU C Library: detached debugging symbols
ii libc6-dev:amd64 2.23-0ubuntu3 amd64 GNU C Library: Development Libraries and Header Files
Information about KF5 at the time of compilation:
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
Qt: 5.5.1
KDE Frameworks: 5.18.0
kf5-config: 1.0
LOG: Configuring, compiling and installing all sources
LOG: Using install dir /home/carlos/kdenlive/20160601
LOG: Found 8 cpus. Will use make -j 9 for compilation
LOG: Changing to /home/carlos/kdenlive/src
LOG: Configuring, compiling, and installing vid.stab
LOG: About to run command: pushd .
~/kdenlive/src ~/kdenlive/src
LOG: About to run command: cd vid.stab
LOG: PATH=/home/carlos/kdenlive/20160601/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
LOG: LD_RUN_PATH=/home/carlos/kdenlive/20160601/lib
LOG: PKG_CONFIG_PATH=/home/carlos/kdenlive/20160601/lib/pkgconfig:
LOG: CFLAGS=
LOG: LDFLAGS=
LOG: Configuring vid.stab
LOG: About to run command: cmake -DCMAKE_INSTALL_PREFIX:PATH=/home/carlos/kdenlive/20160601
-- The C compiler identification is GNU 5.3.1
-- The CXX compiler identification is GNU 5.3.1
-- Check for working C compiler: /usr/bin/cc
-- Check for working C compiler: /usr/bin/cc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- vidstab: writing pkgconfig file /home/carlos/kdenlive/src/vid.stab/vidstab.pc
-- Configuring done
-- Generating done
-- Build files have been written to: /home/carlos/kdenlive/src/vid.stab
LOG: Done configuring vid.stab
LOG: Number of steps completed : 23
LOG: Building vid.stab - this could take some time
LOG: About to run command: make -j9
Scanning dependencies of target vidstab
[ 7%] Building C object CMakeFiles/vidstab.dir/src/transformtype.c.o
[ 15%] Building C object CMakeFiles/vidstab.dir/src/motiondetect_opt.c.o
[ 23%] Building C object CMakeFiles/vidstab.dir/src/motiondetect.c.o
[ 30%] Building C object CMakeFiles/vidstab.dir/src/transform.c.o
[ 38%] Building C object CMakeFiles/vidstab.dir/src/frameinfo.c.o
[ 46%] Building C object CMakeFiles/vidstab.dir/src/transformfixedpoint.c.o
[ 53%] Building C object CMakeFiles/vidstab.dir/src/libvidstab.c.o
[ 61%] Building C object CMakeFiles/vidstab.dir/src/serialize.c.o
[ 69%] Building C object CMakeFiles/vidstab.dir/src/localmotion2transform.c.o
[ 76%] Building C object CMakeFiles/vidstab.dir/src/boxblur.c.o
[ 84%] Building C object CMakeFiles/vidstab.dir/src/vsvector.c.o
[ 92%] Building C object CMakeFiles/vidstab.dir/src/orc/motiondetectorc.c.o
[100%] Linking C shared library libvidstab.so
[100%] Built target vidstab
LOG: Done building vid.stab
LOG: Number of steps completed : 24
LOG: Installing vid.stab
LOG: LD_LIBRARY_PATH=
LOG: About to run command: make install
[100%] Built target vidstab
Install the project...
-- Install configuration: ""
-- Installing: /home/carlos/kdenlive/20160601/include/vid.stab/vidstabdefines.h
-- Installing: /home/carlos/kdenlive/20160601/include/vid.stab/transformfixedpoint.h
-- Installing: /home/carlos/kdenlive/20160601/include/vid.stab/libvidstab.h
-- Installing: /home/carlos/kdenlive/20160601/include/vid.stab/motiondetect_opt.h
-- Installing: /home/carlos/kdenlive/20160601/include/vid.stab/localmotion2transform.h
-- Installing: /home/carlos/kdenlive/20160601/include/vid.stab/motiondetect_internal.h
-- Installing: /home/carlos/kdenlive/20160601/include/vid.stab/transform.h
-- Installing: /home/carlos/kdenlive/20160601/include/vid.stab/motiondetect.h
-- Installing: /home/carlos/kdenlive/20160601/include/vid.stab/serialize.h
-- Installing: /home/carlos/kdenlive/20160601/include/vid.stab/transformtype_operations.h
-- Installing: /home/carlos/kdenlive/20160601/include/vid.stab/frameinfo.h
-- Installing: /home/carlos/kdenlive/20160601/include/vid.stab/vsvector.h
-- Installing: /home/carlos/kdenlive/20160601/include/vid.stab/transformtype.h
-- Installing: /home/carlos/kdenlive/20160601/include/vid.stab/transformfloat.h
-- Installing: /home/carlos/kdenlive/20160601/include/vid.stab/transform_internal.h
-- Installing: /home/carlos/kdenlive/20160601/include/vid.stab/boxblur.h
-- Installing: /home/carlos/kdenlive/20160601/lib/libvidstab.so.1.1
-- Installing: /home/carlos/kdenlive/20160601/lib/libvidstab.so
-- Installing: /home/carlos/kdenlive/20160601/lib/pkgconfig/vidstab.pc
LOG: Done installing vid.stab
LOG: Number of steps completed : 25
LOG: About to run command: popd
~/kdenlive/src
LOG: Configuring, compiling, and installing lame
LOG: About to run command: pushd .
~/kdenlive/src ~/kdenlive/src
LOG: About to run command: cd lame
LOG: PATH=/home/carlos/kdenlive/20160601/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
LOG: LD_RUN_PATH=/home/carlos/kdenlive/20160601/lib
LOG: PKG_CONFIG_PATH=/home/carlos/kdenlive/20160601/lib/pkgconfig:
LOG: CFLAGS=
LOG: LDFLAGS=
LOG: Configuring lame
LOG: About to run command: ./configure --prefix=/home/carlos/kdenlive/20160601 --libdir=/home/carlos/kdenlive/20160601/lib --disable-decoder --disable-frontend
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking minix/config.h usability... no
checking minix/config.h presence... no
checking for minix/config.h... no
checking whether it is safe to define EXTENSIONS... yes
checking for library containing strerror... none required
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for ar... ar
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ISO C89... (cached) none needed
checking dependency style of gcc... (cached) gcc3
checking version of GCC... 5.3.1
checking for function prototypes... yes
checking for string.h... (cached) yes
checking dmalloc.h usability... no
checking dmalloc.h presence... no
checking for dmalloc.h... no
checking for ANSI C header files... (cached) yes
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking for stdint.h... (cached) yes
checking for string.h... (cached) yes
checking sys/soundcard.h usability... yes
checking sys/soundcard.h presence... yes
checking for sys/soundcard.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking xmmintrin.h usability... yes
checking xmmintrin.h presence... yes
checking for xmmintrin.h... yes
checking linux/soundcard.h usability... yes
checking linux/soundcard.h presence... yes
checking for linux/soundcard.h... yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking whether byte ordering is bigendian... no
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking size of short... 2
checking size of unsigned short... 2
checking size of int... 4
checking size of unsigned int... 4
checking size of long... 8
checking size of unsigned long... 8
checking size of long long... 8
checking size of unsigned long long... 8
checking size of float... 4
checking size of double... 8
checking for long double with more range or precision than double... yes
checking for uint8_t... yes
checking for int8_t... yes
checking for uint16_t... yes
checking for int16_t... yes
checking for uint32_t... yes
checking for int32_t... yes
checking for uint64_t... yes
checking for int64_t... yes
checking for IEEE854 compliant 80 bit floats... yes
checking for ieee854_float80_t... no
checking for ieee754_float64_t... no
checking for ieee754_float32_t... no
checking for size_t... yes
checking whether time.h and sys/time.h may both be included... yes
checking for working alloca.h... yes
checking for alloca... yes
checking for gettimeofday... yes
checking for strtol... yes
checking for socket... yes
checking termcap.h usability... yes
checking termcap.h presence... yes
checking for termcap.h... yes
checking ncurses/termcap.h usability... no
checking ncurses/termcap.h presence... no
checking for ncurses/termcap.h... no
checking for initscr in -ltermcap... no
checking for initscr in -lcurses... yes
checking for initscr in -lncurses... yes
checking for ld used by GCC... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking for shared library run path origin... done
checking for iconv... yes
checking for working iconv... yes
checking for iconv declaration...
extern size_t iconv (iconv_t cd, char * inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
checking for cos in -lm... yes
checking for cos in -lffm... no
checking for cos in -lcpml... no
checking for gtk-config... no
checking for GTK - version >= 1.2.0... no
** The gtk-config script installed by GTK could not be found
*** If GTK was installed in PREFIX, make sure PREFIX/bin is in
*** your path, or set the GTK_CONFIG environment variable to the
*** full path to gtk-config.
checking use of ElectricFence malloc debugging... no
checking use of file io... lame
checking use of analyzer hooks... yes
checking use of mpg123 decoder... no
checking if the lame frontend should be build... no
checking if mp3x is requested... no
checking if mp3rtp is requested... no
checking if dynamic linking of the frontends is requested... no
checking for termcap... yes
checking if I have to build the internal vector lib... yes
checking for nasm... no
checking for additional optimizations... no
checking for debug options... no
configure: creating ./config.status
config.status: creating Makefile
config.status: creating libmp3lame/Makefile
config.status: creating libmp3lame/i386/Makefile
config.status: creating libmp3lame/vector/Makefile
config.status: creating frontend/Makefile
config.status: creating mpglib/Makefile
config.status: creating doc/Makefile
config.status: creating doc/html/Makefile
config.status: creating doc/man/Makefile
config.status: creating include/Makefile
config.status: creating Dll/Makefile
config.status: creating misc/Makefile
config.status: creating debian/Makefile
config.status: creating dshow/Makefile
config.status: creating ACM/Makefile
config.status: creating ACM/ADbg/Makefile
config.status: creating ACM/ddk/Makefile
config.status: creating ACM/tinyxml/Makefile
config.status: creating lame.spec
config.status: creating mac/Makefile
config.status: creating macosx/Makefile
config.status: creating macosx/English.lproj/Makefile
config.status: creating macosx/LAME.xcodeproj/Makefile
config.status: creating vc_solution/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
LOG: Done configuring lame
LOG: Number of steps completed : 26
LOG: Building lame - this could take some time
LOG: About to run command: make -j9
make all-recursive
make[1]: Entering directory '/home/carlos/kdenlive/src/lame'
Making all in mpglib
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/mpglib'
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../libmp3lame -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT common.lo -MD -MP -MF .deps/common.Tpo -c -o common.lo common.c
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../libmp3lame -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT dct64_i386.lo -MD -MP -MF .deps/dct64_i386.Tpo -c -o dct64_i386.lo dct64_i386.c
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../libmp3lame -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT decode_i386.lo -MD -MP -MF .deps/decode_i386.Tpo -c -o decode_i386.lo decode_i386.c
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../libmp3lame -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT interface.lo -MD -MP -MF .deps/interface.Tpo -c -o interface.lo interface.c
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../libmp3lame -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT layer1.lo -MD -MP -MF .deps/layer1.Tpo -c -o layer1.lo layer1.c
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../libmp3lame -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT layer2.lo -MD -MP -MF .deps/layer2.Tpo -c -o layer2.lo layer2.c
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../libmp3lame -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT layer3.lo -MD -MP -MF .deps/layer3.Tpo -c -o layer3.lo layer3.c
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../libmp3lame -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT tabinit.lo -MD -MP -MF .deps/tabinit.Tpo -c -o tabinit.lo tabinit.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../libmp3lame -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT decode_i386.lo -MD -MP -MF .deps/decode_i386.Tpo -c decode_i386.c -fPIC -DPIC -o .libs/decode_i386.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../libmp3lame -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT dct64_i386.lo -MD -MP -MF .deps/dct64_i386.Tpo -c dct64_i386.c -fPIC -DPIC -o .libs/dct64_i386.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../libmp3lame -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT layer2.lo -MD -MP -MF .deps/layer2.Tpo -c layer2.c -fPIC -DPIC -o .libs/layer2.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../libmp3lame -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT common.lo -MD -MP -MF .deps/common.Tpo -c common.c -fPIC -DPIC -o .libs/common.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../libmp3lame -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT layer3.lo -MD -MP -MF .deps/layer3.Tpo -c layer3.c -fPIC -DPIC -o .libs/layer3.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../libmp3lame -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT layer1.lo -MD -MP -MF .deps/layer1.Tpo -c layer1.c -fPIC -DPIC -o .libs/layer1.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../libmp3lame -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT interface.lo -MD -MP -MF .deps/interface.Tpo -c interface.c -fPIC -DPIC -o .libs/interface.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../libmp3lame -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT tabinit.lo -MD -MP -MF .deps/tabinit.Tpo -c tabinit.c -fPIC -DPIC -o .libs/tabinit.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../libmp3lame -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT common.lo -MD -MP -MF .deps/common.Tpo -c common.c -o common.o >/dev/null 2>&1
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../libmp3lame -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT tabinit.lo -MD -MP -MF .deps/tabinit.Tpo -c tabinit.c -o tabinit.o >/dev/null 2>&1
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../libmp3lame -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT dct64_i386.lo -MD -MP -MF .deps/dct64_i386.Tpo -c dct64_i386.c -o dct64_i386.o >/dev/null 2>&1
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../libmp3lame -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT decode_i386.lo -MD -MP -MF .deps/decode_i386.Tpo -c decode_i386.c -o decode_i386.o >/dev/null 2>&1
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../libmp3lame -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT interface.lo -MD -MP -MF .deps/interface.Tpo -c interface.c -o interface.o >/dev/null 2>&1
mv -f .deps/common.Tpo .deps/common.Plo
mv -f .deps/tabinit.Tpo .deps/tabinit.Plo
mv -f .deps/dct64_i386.Tpo .deps/dct64_i386.Plo
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../libmp3lame -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT layer2.lo -MD -MP -MF .deps/layer2.Tpo -c layer2.c -o layer2.o >/dev/null 2>&1
mv -f .deps/decode_i386.Tpo .deps/decode_i386.Plo
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../libmp3lame -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT layer1.lo -MD -MP -MF .deps/layer1.Tpo -c layer1.c -o layer1.o >/dev/null 2>&1
mv -f .deps/interface.Tpo .deps/interface.Plo
mv -f .deps/layer2.Tpo .deps/layer2.Plo
mv -f .deps/layer1.Tpo .deps/layer1.Plo
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../libmp3lame -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT layer3.lo -MD -MP -MF .deps/layer3.Tpo -c layer3.c -o layer3.o >/dev/null 2>&1
mv -f .deps/layer3.Tpo .deps/layer3.Plo
/bin/bash ../libtool --tag=CC --mode=link gcc -O3 -ffast-math -funroll-loops -Wall -pipe -o libmpgdecoder.la common.lo dct64_i386.lo decode_i386.lo interface.lo layer1.lo layer2.lo layer3.lo tabinit.lo
libtool: link: ar cru .libs/libmpgdecoder.a .libs/common.o .libs/dct64_i386.o .libs/decode_i386.o .libs/interface.o .libs/layer1.o .libs/layer2.o .libs/layer3.o .libs/tabinit.o
ar: u' modifier ignored sinceD' is the default (see U') libtool: link: ranlib .libs/libmpgdecoder.a libtool: link: ( cd ".libs" && rm -f "libmpgdecoder.la" && ln -s "../libmpgdecoder.la" "libmpgdecoder.la" ) make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/mpglib' Making all in libmp3lame make[2]: Entering directory '/home/carlos/kdenlive/src/lame/libmp3lame' Making all in i386 make[3]: Entering directory '/home/carlos/kdenlive/src/lame/libmp3lame/i386' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/carlos/kdenlive/src/lame/libmp3lame/i386' Making all in vector make[3]: Entering directory '/home/carlos/kdenlive/src/lame/libmp3lame/vector' /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -I../../include -I. -I../../libmp3lame -I../../mpglib -I../.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT xmm_quantize_sub.lo -MD -MP -MF .deps/xmm_quantize_sub.Tpo -c -o xmm_quantize_sub.lo xmm_quantize_sub.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../.. -I../../include -I. -I../../libmp3lame -I../../mpglib -I../.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT xmm_quantize_sub.lo -MD -MP -MF .deps/xmm_quantize_sub.Tpo -c xmm_quantize_sub.c -fPIC -DPIC -o .libs/xmm_quantize_sub.o xmm_quantize_sub.c: In function 'fht_SSE2': xmm_quantize_sub.c:172:20: warning: variable 'v_s2' set but not used [-Wunused-but-set-variable] __m128 v_s2; ^ libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../.. -I../../include -I. -I../../libmp3lame -I../../mpglib -I../.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT xmm_quantize_sub.lo -MD -MP -MF .deps/xmm_quantize_sub.Tpo -c xmm_quantize_sub.c -o xmm_quantize_sub.o >/dev/null 2>&1 mv -f .deps/xmm_quantize_sub.Tpo .deps/xmm_quantize_sub.Plo /bin/bash ../../libtool --tag=CC --mode=link gcc -O3 -ffast-math -funroll-loops -Wall -pipe -o liblamevectorroutines.la xmm_quantize_sub.lo libtool: link: ar cru .libs/liblamevectorroutines.a .libs/xmm_quantize_sub.o ar:u' modifier ignored since D' is the default (seeU')
libtool: link: ranlib .libs/liblamevectorroutines.a
libtool: link: ( cd ".libs" && rm -f "liblamevectorroutines.la" && ln -s "../liblamevectorroutines.la" "liblamevectorroutines.la" )
make[3]: Leaving directory '/home/carlos/kdenlive/src/lame/libmp3lame/vector'
make[3]: Entering directory '/home/carlos/kdenlive/src/lame/libmp3lame'
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT VbrTag.lo -MD -MP -MF .deps/VbrTag.Tpo -c -o VbrTag.lo VbrTag.c
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT bitstream.lo -MD -MP -MF .deps/bitstream.Tpo -c -o bitstream.lo bitstream.c
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT encoder.lo -MD -MP -MF .deps/encoder.Tpo -c -o encoder.lo encoder.c
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT fft.lo -MD -MP -MF .deps/fft.Tpo -c -o fft.lo fft.c
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT gain_analysis.lo -MD -MP -MF .deps/gain_analysis.Tpo -c -o gain_analysis.lo gain_analysis.c
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT id3tag.lo -MD -MP -MF .deps/id3tag.Tpo -c -o id3tag.lo id3tag.c
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT lame.lo -MD -MP -MF .deps/lame.Tpo -c -o lame.lo lame.c
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT newmdct.lo -MD -MP -MF .deps/newmdct.Tpo -c -o newmdct.lo newmdct.c
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT presets.lo -MD -MP -MF .deps/presets.Tpo -c -o presets.lo presets.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT VbrTag.lo -MD -MP -MF .deps/VbrTag.Tpo -c VbrTag.c -fPIC -DPIC -o .libs/VbrTag.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT gain_analysis.lo -MD -MP -MF .deps/gain_analysis.Tpo -c gain_analysis.c -fPIC -DPIC -o .libs/gain_analysis.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT id3tag.lo -MD -MP -MF .deps/id3tag.Tpo -c id3tag.c -fPIC -DPIC -o .libs/id3tag.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT bitstream.lo -MD -MP -MF .deps/bitstream.Tpo -c bitstream.c -fPIC -DPIC -o .libs/bitstream.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT encoder.lo -MD -MP -MF .deps/encoder.Tpo -c encoder.c -fPIC -DPIC -o .libs/encoder.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT newmdct.lo -MD -MP -MF .deps/newmdct.Tpo -c newmdct.c -fPIC -DPIC -o .libs/newmdct.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT lame.lo -MD -MP -MF .deps/lame.Tpo -c lame.c -fPIC -DPIC -o .libs/lame.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT presets.lo -MD -MP -MF .deps/presets.Tpo -c presets.c -fPIC -DPIC -o .libs/presets.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT fft.lo -MD -MP -MF .deps/fft.Tpo -c fft.c -fPIC -DPIC -o .libs/fft.o
bitstream.c: In function 'do_gain_analysis':
bitstream.c:992:24: warning: unused variable 'rov' [-Wunused-variable]
RpgResult_t *const rov = &gfc->ov_rpg;
^
bitstream.c:991:32: warning: unused variable 'rsv' [-Wunused-variable]
RpgStateVar_t const *const rsv = &gfc->sv_rpg;
^
bitstream.c:990:34: warning: unused variable 'cfg' [-Wunused-variable]
SessionConfig_t const *const cfg = &gfc->cfg;
^
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT presets.lo -MD -MP -MF .deps/presets.Tpo -c presets.c -o presets.o >/dev/null 2>&1
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT fft.lo -MD -MP -MF .deps/fft.Tpo -c fft.c -o fft.o >/dev/null 2>&1
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT VbrTag.lo -MD -MP -MF .deps/VbrTag.Tpo -c VbrTag.c -o VbrTag.o >/dev/null 2>&1
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT newmdct.lo -MD -MP -MF .deps/newmdct.Tpo -c newmdct.c -o newmdct.o >/dev/null 2>&1
mv -f .deps/presets.Tpo .deps/presets.Plo
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT psymodel.lo -MD -MP -MF .deps/psymodel.Tpo -c -o psymodel.lo psymodel.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT gain_analysis.lo -MD -MP -MF .deps/gain_analysis.Tpo -c gain_analysis.c -o gain_analysis.o >/dev/null 2>&1
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT encoder.lo -MD -MP -MF .deps/encoder.Tpo -c encoder.c -o encoder.o >/dev/null 2>&1
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT psymodel.lo -MD -MP -MF .deps/psymodel.Tpo -c psymodel.c -fPIC -DPIC -o .libs/psymodel.o
mv -f .deps/fft.Tpo .deps/fft.Plo
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT quantize.lo -MD -MP -MF .deps/quantize.Tpo -c -o quantize.lo quantize.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT quantize.lo -MD -MP -MF .deps/quantize.Tpo -c quantize.c -fPIC -DPIC -o .libs/quantize.o
mv -f .deps/VbrTag.Tpo .deps/VbrTag.Plo
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT quantize_pvt.lo -MD -MP -MF .deps/quantize_pvt.Tpo -c -o quantize_pvt.lo quantize_pvt.c
quantize.c: In function 'VBR_new_iteration_loop':
quantize.c:1734:28: warning: variable 'fullframebits' set but not used [-Wunused-but-set-variable]
int mean_bits, fullframebits;
^
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT quantize_pvt.lo -MD -MP -MF .deps/quantize_pvt.Tpo -c quantize_pvt.c -fPIC -DPIC -o .libs/quantize_pvt.o
mv -f .deps/newmdct.Tpo .deps/newmdct.Plo
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT reservoir.lo -MD -MP -MF .deps/reservoir.Tpo -c -o reservoir.lo reservoir.c
mv -f .deps/encoder.Tpo .deps/encoder.Plo
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT set_get.lo -MD -MP -MF .deps/set_get.Tpo -c -o set_get.lo set_get.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT set_get.lo -MD -MP -MF .deps/set_get.Tpo -c set_get.c -fPIC -DPIC -o .libs/set_get.o
mv -f .deps/gain_analysis.Tpo .deps/gain_analysis.Plo
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT reservoir.lo -MD -MP -MF .deps/reservoir.Tpo -c reservoir.c -fPIC -DPIC -o .libs/reservoir.o
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT tables.lo -MD -MP -MF .deps/tables.Tpo -c -o tables.lo tables.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT tables.lo -MD -MP -MF .deps/tables.Tpo -c tables.c -fPIC -DPIC -o .libs/tables.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT reservoir.lo -MD -MP -MF .deps/reservoir.Tpo -c reservoir.c -o reservoir.o >/dev/null 2>&1
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT tables.lo -MD -MP -MF .deps/tables.Tpo -c tables.c -o tables.o >/dev/null 2>&1
mv -f .deps/tables.Tpo .deps/tables.Plo
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT takehiro.lo -MD -MP -MF .deps/takehiro.Tpo -c -o takehiro.lo takehiro.c
mv -f .deps/reservoir.Tpo .deps/reservoir.Plo
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT util.lo -MD -MP -MF .deps/util.Tpo -c -o util.lo util.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT takehiro.lo -MD -MP -MF .deps/takehiro.Tpo -c takehiro.c -fPIC -DPIC -o .libs/takehiro.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT util.lo -MD -MP -MF .deps/util.Tpo -c util.c -fPIC -DPIC -o .libs/util.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT set_get.lo -MD -MP -MF .deps/set_get.Tpo -c set_get.c -o set_get.o >/dev/null 2>&1
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT quantize_pvt.lo -MD -MP -MF .deps/quantize_pvt.Tpo -c quantize_pvt.c -o quantize_pvt.o >/dev/null 2>&1
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT bitstream.lo -MD -MP -MF .deps/bitstream.Tpo -c bitstream.c -o bitstream.o >/dev/null 2>&1
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT util.lo -MD -MP -MF .deps/util.Tpo -c util.c -o util.o >/dev/null 2>&1
mv -f .deps/set_get.Tpo .deps/set_get.Plo
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT vbrquantize.lo -MD -MP -MF .deps/vbrquantize.Tpo -c -o vbrquantize.lo vbrquantize.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT vbrquantize.lo -MD -MP -MF .deps/vbrquantize.Tpo -c vbrquantize.c -fPIC -DPIC -o .libs/vbrquantize.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT lame.lo -MD -MP -MF .deps/lame.Tpo -c lame.c -o lame.o >/dev/null 2>&1
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT takehiro.lo -MD -MP -MF .deps/takehiro.Tpo -c takehiro.c -o takehiro.o >/dev/null 2>&1
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT quantize.lo -MD -MP -MF .deps/quantize.Tpo -c quantize.c -o quantize.o >/dev/null 2>&1
mv -f .deps/util.Tpo .deps/util.Plo
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT version.lo -MD -MP -MF .deps/version.Tpo -c -o version.lo version.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT id3tag.lo -MD -MP -MF .deps/id3tag.Tpo -c id3tag.c -o id3tag.o >/dev/null 2>&1
mv -f .deps/quantize_pvt.Tpo .deps/quantize_pvt.Plo
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT mpglib_interface.lo -MD -MP -MF .deps/mpglib_interface.Tpo -c -o mpglib_interface.lo mpglib_interface.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT version.lo -MD -MP -MF .deps/version.Tpo -c version.c -fPIC -DPIC -o .libs/version.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT mpglib_interface.lo -MD -MP -MF .deps/mpglib_interface.Tpo -c mpglib_interface.c -fPIC -DPIC -o .libs/mpglib_interface.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT version.lo -MD -MP -MF .deps/version.Tpo -c version.c -o version.o >/dev/null 2>&1
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT mpglib_interface.lo -MD -MP -MF .deps/mpglib_interface.Tpo -c mpglib_interface.c -o mpglib_interface.o >/dev/null 2>&1
mv -f .deps/mpglib_interface.Tpo .deps/mpglib_interface.Plo
mv -f .deps/version.Tpo .deps/version.Plo
mv -f .deps/takehiro.Tpo .deps/takehiro.Plo
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT psymodel.lo -MD -MP -MF .deps/psymodel.Tpo -c psymodel.c -o psymodel.o >/dev/null 2>&1
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -O3 -ffast-math -funroll-loops -Wall -pipe -MT vbrquantize.lo -MD -MP -MF .deps/vbrquantize.Tpo -c vbrquantize.c -o vbrquantize.o >/dev/null 2>&1
mv -f .deps/quantize.Tpo .deps/quantize.Plo
mv -f .deps/bitstream.Tpo .deps/bitstream.Plo
mv -f .deps/lame.Tpo .deps/lame.Plo
mv -f .deps/vbrquantize.Tpo .deps/vbrquantize.Plo
mv -f .deps/id3tag.Tpo .deps/id3tag.Plo
mv -f .deps/psymodel.Tpo .deps/psymodel.Plo
/bin/bash ../libtool --tag=CC --mode=link gcc -O3 -ffast-math -funroll-loops -Wall -pipe -version-info 0:0 -no-undefined -o libmp3lame.la -rpath /home/carlos/kdenlive/20160601/lib VbrTag.lo bitstream.lo encoder.lo fft.lo gain_analysis.lo id3tag.lo lame.lo newmdct.lo presets.lo psymodel.lo quantize.lo quantize_pvt.lo reservoir.lo set_get.lo tables.lo takehiro.lo util.lo vbrquantize.lo version.lo mpglib_interface.lo ../libmp3lame/vector/liblamevectorroutines.la -lm
libtool: link: gcc -shared .libs/VbrTag.o .libs/bitstream.o .libs/encoder.o .libs/fft.o .libs/gain_analysis.o .libs/id3tag.o .libs/lame.o .libs/newmdct.o .libs/presets.o .libs/psymodel.o .libs/quantize.o .libs/quantize_pvt.o .libs/reservoir.o .libs/set_get.o .libs/tables.o .libs/takehiro.o .libs/util.o .libs/vbrquantize.o .libs/version.o .libs/mpglib_interface.o -Wl,--whole-archive ../libmp3lame/vector/.libs/liblamevectorroutines.a -Wl,--no-whole-archive -lm -Wl,-soname -Wl,libmp3lame.so.0 -o .libs/libmp3lame.so.0.0.0
libtool: link: (cd ".libs" && rm -f "libmp3lame.so.0" && ln -s "libmp3lame.so.0.0.0" "libmp3lame.so.0")
libtool: link: (cd ".libs" && rm -f "libmp3lame.so" && ln -s "libmp3lame.so.0.0.0" "libmp3lame.so")
libtool: link: (cd .libs/libmp3lame.lax/liblamevectorroutines.a && ar x "/home/carlos/kdenlive/src/lame/libmp3lame/../libmp3lame/vector/.libs/liblamevectorroutines.a")
libtool: link: ar cru .libs/libmp3lame.a VbrTag.o bitstream.o encoder.o fft.o gain_analysis.o id3tag.o lame.o newmdct.o presets.o psymodel.o quantize.o quantize_pvt.o reservoir.o set_get.o tables.o takehiro.o util.o vbrquantize.o version.o mpglib_interface.o .libs/libmp3lame.lax/liblamevectorroutines.a/xmm_quantize_sub.o
ar: u' modifier ignored sinceD' is the default (see `U')
libtool: link: ranlib .libs/libmp3lame.a
libtool: link: rm -fr .libs/libmp3lame.lax
libtool: link: ( cd ".libs" && rm -f "libmp3lame.la" && ln -s "../libmp3lame.la" "libmp3lame.la" )
make[3]: Leaving directory '/home/carlos/kdenlive/src/lame/libmp3lame'
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/libmp3lame'
Making all in frontend
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/frontend'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/frontend'
Making all in Dll
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/Dll'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/Dll'
Making all in debian
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/debian'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/debian'
Making all in doc
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/doc'
Making all in html
make[3]: Entering directory '/home/carlos/kdenlive/src/lame/doc/html'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/carlos/kdenlive/src/lame/doc/html'
Making all in man
make[3]: Entering directory '/home/carlos/kdenlive/src/lame/doc/man'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/carlos/kdenlive/src/lame/doc/man'
make[3]: Entering directory '/home/carlos/kdenlive/src/lame/doc'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/home/carlos/kdenlive/src/lame/doc'
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/doc'
Making all in include
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/include'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/include'
Making all in misc
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/misc'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/misc'
Making all in dshow
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/dshow'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/dshow'
Making all in ACM
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/ACM'
Making all in ADbg
make[3]: Entering directory '/home/carlos/kdenlive/src/lame/ACM/ADbg'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/carlos/kdenlive/src/lame/ACM/ADbg'
Making all in ddk
make[3]: Entering directory '/home/carlos/kdenlive/src/lame/ACM/ddk'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/carlos/kdenlive/src/lame/ACM/ddk'
Making all in tinyxml
make[3]: Entering directory '/home/carlos/kdenlive/src/lame/ACM/tinyxml'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/carlos/kdenlive/src/lame/ACM/tinyxml'
make[3]: Entering directory '/home/carlos/kdenlive/src/lame/ACM'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/home/carlos/kdenlive/src/lame/ACM'
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/ACM'
Making all in mac
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/mac'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/mac'
Making all in macosx
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/macosx'
Making all in English.lproj
make[3]: Entering directory '/home/carlos/kdenlive/src/lame/macosx/English.lproj'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/carlos/kdenlive/src/lame/macosx/English.lproj'
Making all in LAME.xcodeproj
make[3]: Entering directory '/home/carlos/kdenlive/src/lame/macosx/LAME.xcodeproj'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/carlos/kdenlive/src/lame/macosx/LAME.xcodeproj'
make[3]: Entering directory '/home/carlos/kdenlive/src/lame/macosx'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/home/carlos/kdenlive/src/lame/macosx'
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/macosx'
Making all in vc_solution
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/vc_solution'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/vc_solution'
make[2]: Entering directory '/home/carlos/kdenlive/src/lame'
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame'
make[1]: Leaving directory '/home/carlos/kdenlive/src/lame'
LOG: Done building lame
LOG: Number of steps completed : 27
LOG: Installing lame
LOG: LD_LIBRARY_PATH=
LOG: About to run command: make install
Making install in mpglib
make[1]: Entering directory '/home/carlos/kdenlive/src/lame/mpglib'
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/mpglib'
make[2]: Nothing to be done for 'install-exec-am'.
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/mpglib'
make[1]: Leaving directory '/home/carlos/kdenlive/src/lame/mpglib'
Making install in libmp3lame
make[1]: Entering directory '/home/carlos/kdenlive/src/lame/libmp3lame'
Making install in i386
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/libmp3lame/i386'
make[3]: Entering directory '/home/carlos/kdenlive/src/lame/libmp3lame/i386'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/carlos/kdenlive/src/lame/libmp3lame/i386'
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/libmp3lame/i386'
Making install in vector
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/libmp3lame/vector'
make[3]: Entering directory '/home/carlos/kdenlive/src/lame/libmp3lame/vector'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/carlos/kdenlive/src/lame/libmp3lame/vector'
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/libmp3lame/vector'
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/libmp3lame'
make[3]: Entering directory '/home/carlos/kdenlive/src/lame/libmp3lame'
test -z "/home/carlos/kdenlive/20160601/lib" || /bin/mkdir -p "/home/carlos/kdenlive/20160601/lib"
/bin/bash ../libtool --mode=install /usr/bin/install -c libmp3lame.la '/home/carlos/kdenlive/20160601/lib'
libtool: install: /usr/bin/install -c .libs/libmp3lame.so.0.0.0 /home/carlos/kdenlive/20160601/lib/libmp3lame.so.0.0.0
libtool: install: (cd /home/carlos/kdenlive/20160601/lib && { ln -s -f libmp3lame.so.0.0.0 libmp3lame.so.0 || { rm -f libmp3lame.so.0 && ln -s libmp3lame.so.0.0.0 libmp3lame.so.0; }; })
libtool: install: (cd /home/carlos/kdenlive/20160601/lib && { ln -s -f libmp3lame.so.0.0.0 libmp3lame.so || { rm -f libmp3lame.so && ln -s libmp3lame.so.0.0.0 libmp3lame.so; }; })
libtool: install: /usr/bin/install -c .libs/libmp3lame.lai /home/carlos/kdenlive/20160601/lib/libmp3lame.la
libtool: install: /usr/bin/install -c .libs/libmp3lame.a /home/carlos/kdenlive/20160601/lib/libmp3lame.a
libtool: install: chmod 644 /home/carlos/kdenlive/20160601/lib/libmp3lame.a
libtool: install: ranlib /home/carlos/kdenlive/20160601/lib/libmp3lame.a

libtool: finish: PATH="/home/carlos/kdenlive/20160601/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/carlos/kdenlive/20160601/lib

Libraries have been installed in:
/home/carlos/kdenlive/20160601/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:

• add LIBDIR to the `LD_LIBRARY_PATH' environment variable
  during execution
• add LIBDIR to the `LD_RUN_PATH' environment variable
  during linking
• use the `-Wl,-rpath -Wl,LIBDIR' linker flag
• have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for

more information, such as the ld(1) and ld.so(8) manual pages.

make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/carlos/kdenlive/src/lame/libmp3lame'
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/libmp3lame'
make[1]: Leaving directory '/home/carlos/kdenlive/src/lame/libmp3lame'
Making install in frontend
make[1]: Entering directory '/home/carlos/kdenlive/src/lame/frontend'
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/frontend'
test -z "/home/carlos/kdenlive/20160601/bin" || /bin/mkdir -p "/home/carlos/kdenlive/20160601/bin"
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/frontend'
make[1]: Leaving directory '/home/carlos/kdenlive/src/lame/frontend'
Making install in Dll
make[1]: Entering directory '/home/carlos/kdenlive/src/lame/Dll'
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/Dll'
make[2]: Nothing to be done for 'install-exec-am'.
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/Dll'
make[1]: Leaving directory '/home/carlos/kdenlive/src/lame/Dll'
Making install in debian
make[1]: Entering directory '/home/carlos/kdenlive/src/lame/debian'
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/debian'
make[2]: Nothing to be done for 'install-exec-am'.
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/debian'
make[1]: Leaving directory '/home/carlos/kdenlive/src/lame/debian'
Making install in doc
make[1]: Entering directory '/home/carlos/kdenlive/src/lame/doc'
Making install in html
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/doc/html'
make[3]: Entering directory '/home/carlos/kdenlive/src/lame/doc/html'
make[3]: Nothing to be done for 'install-exec-am'.
test -z "/home/carlos/kdenlive/20160601/share/doc/lame/html" || /bin/mkdir -p "/home/carlos/kdenlive/20160601/share/doc/lame/html"
/usr/bin/install -c -m 644 about.html abr.html cbr.html contact.html contributors.html detailed.html history.html index.html introduction.html links.html list.html ms_stereo.html usage.html vbr.html '/home/carlos/kdenlive/20160601/share/doc/lame/html'
make[3]: Leaving directory '/home/carlos/kdenlive/src/lame/doc/html'
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/doc/html'
Making install in man
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/doc/man'
make[3]: Entering directory '/home/carlos/kdenlive/src/lame/doc/man'
make[3]: Nothing to be done for 'install-exec-am'.
test -z "/home/carlos/kdenlive/20160601/share/man/man1" || /bin/mkdir -p "/home/carlos/kdenlive/20160601/share/man/man1"
/usr/bin/install -c -m 644 lame.1 '/home/carlos/kdenlive/20160601/share/man/man1'
make[3]: Leaving directory '/home/carlos/kdenlive/src/lame/doc/man'
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/doc/man'
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/doc'
make[3]: Entering directory '/home/carlos/kdenlive/src/lame/doc'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/carlos/kdenlive/src/lame/doc'
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/doc'
make[1]: Leaving directory '/home/carlos/kdenlive/src/lame/doc'
Making install in include
make[1]: Entering directory '/home/carlos/kdenlive/src/lame/include'
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/include'
make[2]: Nothing to be done for 'install-exec-am'.
test -z "/home/carlos/kdenlive/20160601/include/lame" || /bin/mkdir -p "/home/carlos/kdenlive/20160601/include/lame"
/usr/bin/install -c -m 644 lame.h '/home/carlos/kdenlive/20160601/include/lame'
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/include'
make[1]: Leaving directory '/home/carlos/kdenlive/src/lame/include'
Making install in misc
make[1]: Entering directory '/home/carlos/kdenlive/src/lame/misc'
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/misc'
make[2]: Nothing to be done for 'install-exec-am'.
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/misc'
make[1]: Leaving directory '/home/carlos/kdenlive/src/lame/misc'
Making install in dshow
make[1]: Entering directory '/home/carlos/kdenlive/src/lame/dshow'
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/dshow'
make[2]: Nothing to be done for 'install-exec-am'.
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/dshow'
make[1]: Leaving directory '/home/carlos/kdenlive/src/lame/dshow'
Making install in ACM
make[1]: Entering directory '/home/carlos/kdenlive/src/lame/ACM'
Making install in ADbg
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/ACM/ADbg'
make[3]: Entering directory '/home/carlos/kdenlive/src/lame/ACM/ADbg'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/carlos/kdenlive/src/lame/ACM/ADbg'
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/ACM/ADbg'
Making install in ddk
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/ACM/ddk'
make[3]: Entering directory '/home/carlos/kdenlive/src/lame/ACM/ddk'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/carlos/kdenlive/src/lame/ACM/ddk'
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/ACM/ddk'
Making install in tinyxml
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/ACM/tinyxml'
make[3]: Entering directory '/home/carlos/kdenlive/src/lame/ACM/tinyxml'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/carlos/kdenlive/src/lame/ACM/tinyxml'
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/ACM/tinyxml'
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/ACM'
make[3]: Entering directory '/home/carlos/kdenlive/src/lame/ACM'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/carlos/kdenlive/src/lame/ACM'
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/ACM'
make[1]: Leaving directory '/home/carlos/kdenlive/src/lame/ACM'
Making install in mac
make[1]: Entering directory '/home/carlos/kdenlive/src/lame/mac'
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/mac'
make[2]: Nothing to be done for 'install-exec-am'.
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/mac'
make[1]: Leaving directory '/home/carlos/kdenlive/src/lame/mac'
Making install in macosx
make[1]: Entering directory '/home/carlos/kdenlive/src/lame/macosx'
Making install in English.lproj
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/macosx/English.lproj'
make[3]: Entering directory '/home/carlos/kdenlive/src/lame/macosx/English.lproj'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/carlos/kdenlive/src/lame/macosx/English.lproj'
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/macosx/English.lproj'
Making install in LAME.xcodeproj
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/macosx/LAME.xcodeproj'
make[3]: Entering directory '/home/carlos/kdenlive/src/lame/macosx/LAME.xcodeproj'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/carlos/kdenlive/src/lame/macosx/LAME.xcodeproj'
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/macosx/LAME.xcodeproj'
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/macosx'
make[3]: Entering directory '/home/carlos/kdenlive/src/lame/macosx'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/carlos/kdenlive/src/lame/macosx'
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/macosx'
make[1]: Leaving directory '/home/carlos/kdenlive/src/lame/macosx'
Making install in vc_solution
make[1]: Entering directory '/home/carlos/kdenlive/src/lame/vc_solution'
make[2]: Entering directory '/home/carlos/kdenlive/src/lame/vc_solution'
make[2]: Nothing to be done for 'install-exec-am'.
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame/vc_solution'
make[1]: Leaving directory '/home/carlos/kdenlive/src/lame/vc_solution'
make[1]: Entering directory '/home/carlos/kdenlive/src/lame'
make[2]: Entering directory '/home/carlos/kdenlive/src/lame'
make[2]: Nothing to be done for 'install-exec-am'.
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/carlos/kdenlive/src/lame'
make[1]: Leaving directory '/home/carlos/kdenlive/src/lame'
LOG: Done installing lame
LOG: Number of steps completed : 28
LOG: About to run command: popd
~/kdenlive/src
LOG: Configuring, compiling, and installing libvpx
LOG: About to run command: pushd .
~/kdenlive/src ~/kdenlive/src
LOG: About to run command: cd libvpx
LOG: PATH=/home/carlos/kdenlive/20160601/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
LOG: LD_RUN_PATH=/home/carlos/kdenlive/20160601/lib
LOG: PKG_CONFIG_PATH=/home/carlos/kdenlive/20160601/lib/pkgconfig:
LOG: CFLAGS=
LOG: LDFLAGS=
LOG: Configuring libvpx
LOG: About to run command: make clean
make: *** No rule to make target 'clean'. Stop.
LOG: About to run command: ./configure --prefix=/home/carlos/kdenlive/20160601 --enable-vp8 --enable-postproc --enable-multithread --enable-runtime-cpu-detect --disable-install-docs --disable-debug-libs --disable-examples --disable-unit-tests --enable-shared --disable-static
enabling vp8
enabling postproc
enabling runtime_cpu_detect
disabling install_docs
disabling debug_libs
disabling examples
disabling unit_tests
enabling shared
disabling static
Configuring selected codecs
enabling vp9_encoder
enabling vp9_decoder
Configuring for target 'x86_64-linux-gcc'
enabling x86_64
enabling pic
enabling mmx
enabling sse
enabling sse2
enabling sse3
enabling ssse3
enabling sse4_1
enabling avx
enabling avx2
using yasm
enabling use_x86inc
enabling webm_io
enabling libyuv
Creating makefiles for x86_64-linux-gcc libs
Creating makefiles for x86_64-linux-gcc docs
LOG: Done configuring libvpx
LOG: Number of steps completed : 29
LOG: Building libvpx - this could take some time
LOG: About to run command: make -j9
[CREATE] vpx_scale_rtcd.h
[CREATE] vpx_dsp_rtcd.h
[CREATE] vp8_rtcd.h
[CREATE] vp9_rtcd.h
[DEP] vp9/encoder/x86/vp9_quantize_ssse3_x86_64.asm.d
[DEP] vp9/encoder/x86/vp9_error_sse2.asm.d
[DEP] vp9/encoder/x86/vp9_dct_sse2.asm.d
[DEP] vp9/encoder/x86/vp9_temporal_filter_apply_sse2.asm.d
[DEP] vp8/common/x86/postproc_sse2.asm.d
[DEP] vp8/common/x86/loopfilter_block_sse2_x86_64.asm.d
[DEP] vp8/common/x86/mfqe_sse2.asm.d
[DEP] vp8/common/x86/postproc_mmx.asm.d
[DEP] vp8/common/x86/subpixel_ssse3.asm.d
[DEP] vp8/common/x86/copy_sse3.asm.d
[DEP] vp8/common/x86/iwalsh_sse2.asm.d
[DEP] vp8/common/x86/subpixel_sse2.asm.d
[DEP] vp8/common/x86/loopfilter_sse2.asm.d
[DEP] vp8/common/x86/idctllm_sse2.asm.d
[DEP] vp8/common/x86/recon_sse2.asm.d
[DEP] vp8/common/x86/copy_sse2.asm.d
[DEP] vp8/common/x86/subpixel_mmx.asm.d
[DEP] vp8/common/x86/recon_mmx.asm.d
[DEP] vp8/common/x86/vp8_loopfilter_mmx.asm.d
[DEP] vp8/common/x86/iwalsh_mmx.asm.d
[DEP] vp8/common/x86/idctllm_mmx.asm.d
[DEP] vp8/common/x86/dequantize_mmx.asm.d
[DEP] vp8/encoder/x86/encodeopt.asm.d
[DEP] vp8/encoder/x86/quantize_mmx.asm.d
[DEP] vp8/encoder/x86/temporal_filter_apply_sse2.asm.d
[DEP] vp8/encoder/x86/fwalsh_sse2.asm.d
[DEP] vpx_dsp/x86/subpel_variance_sse2.asm.d
[DEP] vp8/encoder/x86/dct_mmx.asm.d
[DEP] vp8/encoder/x86/dct_sse2.asm.d
[DEP] vpx_dsp/x86/ssim_opt_x86_64.asm.d
[DEP] vpx_dsp/x86/halfpix_variance_impl_sse2.asm.d
[DEP] vpx_dsp/x86/variance_impl_mmx.asm.d
[DEP] vpx_dsp/x86/subtract_sse2.asm.d
[DEP] vpx_dsp/x86/sad_sse2.asm.d
[DEP] vpx_dsp/x86/sad4d_sse2.asm.d
[DEP] vpx_dsp/x86/sad_sse4.asm.d
[DEP] vpx_dsp/x86/sad_sse3.asm.d
[DEP] vpx_dsp/x86/sad_ssse3.asm.d
[DEP] vpx_dsp/x86/avg_ssse3_x86_64.asm.d
[DEP] vpx_dsp/x86/quantize_ssse3_x86_64.asm.d
[DEP] vpx_dsp/x86/quantize_avx_x86_64.asm.d
[DEP] vpx_dsp/x86/inv_txfm_ssse3_x86_64.asm.d
[DEP] vpx_dsp/x86/inv_wht_sse2.asm.d
[DEP] vpx_dsp/x86/vpx_convolve_copy_sse2.asm.d
[DEP] vpx_dsp/x86/fwd_txfm_ssse3_x86_64.asm.d
[DEP] vpx_dsp/x86/vpx_subpixel_bilinear_ssse3.asm.d
[DEP] vpx_dsp/x86/vpx_subpixel_8t_ssse3.asm.d
[DEP] vpx_dsp/x86/vpx_subpixel_bilinear_sse2.asm.d
[DEP] vpx_dsp/x86/vpx_subpixel_8t_sse2.asm.d
[DEP] vpx_dsp/x86/add_noise_sse2.asm.d
[DEP] vpx_dsp/x86/add_noise_mmx.asm.d
[DEP] vpx_dsp/x86/intrapred_ssse3.asm.d
[DEP] vpx_dsp/x86/intrapred_sse2.asm.d
[DEP] vpx_ports/x86_abi_support.asm.d
[DEP] vpx_config.c.d
[DEP] vpx_ports/emms.asm.d
[DEP] vp9/decoder/vp9_dsubexp.c.d
[DEP] vp9/decoder/vp9_decoder.c.d
[DEP] vp9/decoder/vp9_dthread.c.d
[DEP] vp9/decoder/vp9_detokenize.c.d
[DEP] vp9/decoder/vp9_decodeframe.c.d
[DEP] vp9/vp9_dx_iface.c.d
[DEP] vp9/decoder/vp9_decodemv.c.d
[DEP] vp9/common/x86/vp9_idct_intrin_sse2.c.d
[DEP] vp9/common/vp9_scan.c.d
[DEP] vp9/common/vp9_common_data.c.d
[DEP] vp9/common/vp9_reconintra.c.d
[DEP] vp9/common/vp9_quant_common.c.d
[DEP] vp9/common/vp9_reconinter.c.d
[DEP] vp9/common/vp9_mvref_common.c.d
[DEP] vp9/common/vp9_thread_common.c.d
[DEP] vp9/common/vp9_tile_common.c.d
[DEP] vp9/common/vp9_seg_common.c.d
[DEP] vp9/common/vp9_loopfilter.c.d
[DEP] vp9/common/vp9_scale.c.d
[DEP] vp9/common/vp9_rtcd.c.d
[DEP] vp9/common/vp9_pred_common.c.d
[DEP] vp9/common/vp9_idct.c.d
[DEP] vp9/common/vp9_filter.c.d
[DEP] vp9/common/vp9_frame_buffers.c.d
[DEP] vp9/common/vp9_entropymv.c.d
[DEP] vp9/common/vp9_entropymode.c.d
[DEP] vp9/common/vp9_entropy.c.d
[DEP] vp9/common/vp9_debugmodes.c.d
[DEP] vp9/common/vp9_alloccommon.c.d
[DEP] vp9/encoder/x86/vp9_error_intrin_avx2.c.d
[DEP] vp9/common/vp9_blockd.c.d
[DEP] vp9/encoder/x86/vp9_frame_scale_ssse3.c.d
[DEP] vp9/encoder/x86/vp9_dct_ssse3.c.d
[DEP] vp9/encoder/x86/vp9_dct_intrin_sse2.c.d
[DEP] vp9/encoder/x86/vp9_quantize_sse2.c.d
[DEP] vp9/encoder/vp9_mbgraph.c.d
[DEP] vp9/encoder/vp9_temporal_filter.c.d
[DEP] vp9/encoder/vp9_noise_estimate.c.d
[DEP] vp9/encoder/vp9_skin_detection.c.d
[DEP] vp9/encoder/vp9_aq_complexity.c.d
[DEP] vp9/encoder/vp9_aq_cyclicrefresh.c.d
[DEP] vp9/encoder/vp9_aq_360.c.d
[DEP] vp9/encoder/vp9_aq_variance.c.d
[DEP] vp9/encoder/vp9_treewriter.c.d
[DEP] vp9/encoder/vp9_tokenize.c.d
[DEP] vp9/encoder/vp9_resize.c.d
[DEP] vp9/encoder/vp9_svc_layercontext.c.d
[DEP] vp9/encoder/vp9_subexp.c.d
[DEP] vp9/encoder/vp9_speed_features.c.d
[DEP] vp9/encoder/vp9_segmentation.c.d
[DEP] vp9/encoder/vp9_pickmode.c.d
[DEP] vp9/encoder/vp9_rdopt.c.d
[DEP] vp9/encoder/vp9_rd.c.d
[DEP] vp9/encoder/vp9_ratectrl.c.d
[DEP] vp9/encoder/vp9_quantize.c.d
[DEP] vp9/encoder/vp9_picklpf.c.d
[DEP] vp9/encoder/vp9_encoder.c.d
[DEP] vp9/encoder/vp9_lookahead.c.d
[DEP] vp9/encoder/vp9_firstpass.c.d
[DEP] vp9/encoder/vp9_mcomp.c.d
[DEP] vp9/encoder/vp9_extend.c.d
[DEP] vp9/encoder/vp9_ethread.c.d
[DEP] vp9/encoder/vp9_encodemv.c.d
[DEP] vp9/encoder/vp9_encodemb.c.d
[DEP] vp9/encoder/vp9_dct.c.d
[DEP] vp9/encoder/vp9_encodeframe.c.d
[DEP] vp9/encoder/vp9_cost.c.d
[DEP] vp9/encoder/vp9_context_tree.c.d
[DEP] vp9/encoder/vp9_bitstream.c.d
[DEP] vp9/vp9_cx_iface.c.d
[DEP] vp8/decoder/threading.c.d
[DEP] vp8/decoder/onyxd_if.c.d
[DEP] vp8/decoder/detokenize.c.d
[DEP] vp8/decoder/decodeframe.c.d
[DEP] vp8/decoder/decodemv.c.d
[DEP] vp8/decoder/dboolhuff.c.d
[DEP] vp8/vp8_dx_iface.c.d
[DEP] vp8/common/x86/idct_blk_sse2.c.d
[DEP] vp8/common/postproc.c.d
[DEP] vp8/common/mfqe.c.d
[DEP] vp8/common/x86/idct_blk_mmx.c.d
[DEP] vp8/common/x86/loopfilter_x86.c.d
[DEP] vp8/common/x86/vp8_asm_stubs.c.d
[DEP] vp8/common/x86/filter_x86.c.d
[DEP] vp8/common/treecoder.c.d
[DEP] vp8/common/swapyv12buffer.c.d
[DEP] vp8/common/setupintrarecon.c.d
[DEP] vp8/common/reconintra.c.d
[DEP] vp8/common/reconintra4x4.c.d
[DEP] vp8/common/reconinter.c.d
[DEP] vp8/common/quant_common.c.d
[DEP] vp8/common/modecont.c.d
[DEP] vp8/common/mbpitch.c.d
[DEP] vp8/common/loopfilter_filters.c.d
[DEP] vp8/common/rtcd.c.d
[DEP] vp8/common/vp8_loopfilter.c.d
[DEP] vp8/common/idct_blk.c.d
[DEP] vp8/common/idctllm.c.d
[DEP] vp8/common/generic/systemdependent.c.d
[DEP] vp8/common/findnearmv.c.d
[DEP] vp8/common/filter.c.d
[DEP] vp8/common/extend.c.d
[DEP] vp8/common/entropymv.c.d
[DEP] vp8/common/entropymode.c.d
[DEP] vp8/common/entropy.c.d
[DEP] vp8/common/dequantize.c.d
[DEP] vp8/common/debugmodes.c.d
[DEP] vp8/common/copy_c.c.d
[DEP] vp8/common/blockd.c.d
[DEP] vp8/common/alloccommon.c.d
[DEP] vp8/encoder/x86/denoising_sse2.c.d
[DEP] vp8/encoder/x86/vp8_enc_stubs_sse2.c.d
[DEP] vp8/encoder/x86/quantize_sse4.c.d
[DEP] vp8/encoder/x86/quantize_ssse3.c.d
[DEP] vp8/encoder/x86/vp8_quantize_sse2.c.d
[DEP] vp8/encoder/temporal_filter.c.d
[DEP] vp8/encoder/x86/vp8_enc_stubs_mmx.c.d
[DEP] vp8/encoder/treewriter.c.d
[DEP] vp8/encoder/tokenize.c.d
[DEP] vp8/encoder/segmentation.c.d
[DEP] vp8/encoder/rdopt.c.d
[DEP] vp8/encoder/vp8_quantize.c.d
[DEP] vp8/encoder/picklpf.c.d
[DEP] vp8/encoder/ratectrl.c.d
[DEP] vp8/encoder/pickinter.c.d
[DEP] vp8/encoder/mcomp.c.d
[DEP] vp8/encoder/modecosts.c.d
[DEP] vp8/encoder/onyx_if.c.d
[DEP] vp8/encoder/firstpass.c.d
[DEP] vp8/encoder/ethreading.c.d
[DEP] vp8/encoder/denoising.c.d
[DEP] vp8/encoder/lookahead.c.d
[DEP] vp8/encoder/encodemb.c.d
[DEP] vp8/encoder/encodemv.c.d
[DEP] vp8/encoder/encodeintra.c.d
[DEP] vp8/encoder/encodeframe.c.d
[DEP] vp8/encoder/boolhuff.c.d
[DEP] vp8/encoder/dct.c.d
[DEP] vp8/vp8_cx_iface.c.d
[DEP] vp8/encoder/bitstream.c.d
[DEP] vpx_util/vpx_thread.c.d
[DEP] vpx_dsp/vpx_dsp_rtcd.c.d
[DEP] vpx_dsp/x86/variance_impl_avx2.c.d
[DEP] vpx_dsp/x86/halfpix_variance_sse2.c.d
[DEP] vpx_dsp/x86/variance_sse2.c.d
[DEP] vpx_dsp/x86/variance_avx2.c.d
[DEP] vpx_dsp/x86/variance_mmx.c.d
[DEP] vpx_dsp/variance.c.d
[DEP] vpx_dsp/x86/sad_avx2.c.d
[DEP] vpx_dsp/x86/sad4d_avx2.c.d
[DEP] vpx_dsp/subtract.c.d
[DEP] vpx_dsp/sad.c.d
[DEP] vpx_dsp/x86/avg_intrin_sse2.c.d
[DEP] vpx_dsp/avg.c.d
[DEP] vpx_dsp/x86/quantize_sse2.c.d
[DEP] vpx_dsp/quantize.c.d
[DEP] vpx_dsp/x86/inv_txfm_sse2.c.d
[DEP] vpx_dsp/inv_txfm.c.d
[DEP] vpx_dsp/x86/fwd_txfm_avx2.c.d
[DEP] vpx_dsp/fwd_txfm.c.d
[DEP] vpx_dsp/x86/loopfilter_avx2.c.d
[DEP] vpx_dsp/x86/fwd_txfm_sse2.c.d
[DEP] vpx_dsp/x86/loopfilter_sse2.c.d
[DEP] vpx_dsp/x86/vpx_subpixel_8t_intrin_ssse3.c.d
[DEP] vpx_dsp/loopfilter.c.d
[DEP] vpx_dsp/x86/vpx_subpixel_8t_intrin_avx2.c.d
[DEP] vpx_dsp/x86/vpx_asm_stubs.c.d
[DEP] vpx_dsp/vpx_convolve.c.d
[DEP] vpx_dsp/add_noise.c.d
[DEP] vpx_dsp/intrapred.c.d
[DEP] vpx_dsp/bitreader_buffer.c.d
[DEP] vpx_dsp/bitreader.c.d
[DEP] vpx_dsp/prob.c.d
[DEP] vpx_dsp/bitwriter.c.d
[DEP] vpx_dsp/bitwriter_buffer.c.d
[DEP] vpx_scale/generic/yv12extend.c.d
[DEP] vpx_scale/generic/gen_scalers.c.d
[DEP] vpx_scale/vpx_scale_rtcd.c.d
[DEP] vpx_scale/generic/yv12config.c.d
[DEP] vpx_scale/generic/vpx_scale.c.d
[DEP] vpx/src/vpx_psnr.c.d
[DEP] vpx_mem/vpx_mem.c.d
[DEP] vpx/src/vpx_image.c.d
[DEP] vpx/src/vpx_codec.c.d
[DEP] vpx/src/vpx_encoder.c.d
[DEP] vpx/src/vpx_decoder.c.d
[CREATE] vpx_config.asm
[DEP] vp9/encoder/x86/vp9_quantize_ssse3_x86_64.asm.d
[DEP] vp9/encoder/x86/vp9_error_sse2.asm.d
[DEP] vp9/encoder/x86/vp9_dct_sse2.asm.d
[DEP] vp9/encoder/x86/vp9_temporal_filter_apply_sse2.asm.d
[DEP] vp8/common/x86/loopfilter_block_sse2_x86_64.asm.d
[DEP] vp8/common/x86/postproc_sse2.asm.d
[DEP] vp8/common/x86/mfqe_sse2.asm.d
[DEP] vp8/common/x86/postproc_mmx.asm.d
[DEP] vp8/common/x86/subpixel_ssse3.asm.d
[DEP] vp8/common/x86/iwalsh_sse2.asm.d
[DEP] vp8/common/x86/loopfilter_sse2.asm.d
[DEP] vp8/common/x86/copy_sse3.asm.d
[DEP] vp8/common/x86/subpixel_sse2.asm.d
[DEP] vp8/common/x86/idctllm_sse2.asm.d
[DEP] vp8/common/x86/recon_sse2.asm.d
[DEP] vp8/common/x86/copy_sse2.asm.d
[DEP] vp8/common/x86/subpixel_mmx.asm.d
[DEP] vp8/common/x86/recon_mmx.asm.d
[DEP] vp8/common/x86/vp8_loopfilter_mmx.asm.d
[DEP] vp8/common/x86/idctllm_mmx.asm.d
[DEP] vp8/common/x86/iwalsh_mmx.asm.d
[DEP] vp8/encoder/x86/encodeopt.asm.d
[DEP] vp8/common/x86/dequantize_mmx.asm.d
[DEP] vp8/encoder/x86/quantize_mmx.asm.d
[DEP] vp8/encoder/x86/temporal_filter_apply_sse2.asm.d
[DEP] vp8/encoder/x86/fwalsh_sse2.asm.d
[DEP] vp8/encoder/x86/dct_sse2.asm.d
[DEP] vp8/encoder/x86/dct_mmx.asm.d
[DEP] vpx_dsp/x86/subpel_variance_sse2.asm.d
[DEP] vpx_dsp/x86/ssim_opt_x86_64.asm.d
[DEP] vpx_dsp/x86/halfpix_variance_impl_sse2.asm.d
[DEP] vpx_dsp/x86/variance_impl_mmx.asm.d
[DEP] vpx_dsp/x86/subtract_sse2.asm.d
[DEP] vpx_dsp/x86/sad_sse2.asm.d
[DEP] vpx_dsp/x86/sad4d_sse2.asm.d
[DEP] vpx_dsp/x86/sad_sse4.asm.d
[DEP] vpx_dsp/x86/sad_ssse3.asm.d
[DEP] vpx_dsp/x86/sad_sse3.asm.d
[DEP] vpx_dsp/x86/avg_ssse3_x86_64.asm.d
[DEP] vpx_dsp/x86/quantize_avx_x86_64.asm.d
[DEP] vpx_dsp/x86/quantize_ssse3_x86_64.asm.d
[DEP] vpx_dsp/x86/inv_txfm_ssse3_x86_64.asm.d
[DEP] vpx_dsp/x86/inv_wht_sse2.asm.d
[DEP] vpx_dsp/x86/fwd_txfm_ssse3_x86_64.asm.d
[DEP] vpx_dsp/x86/vpx_convolve_copy_sse2.asm.d
[DEP] vpx_dsp/x86/vpx_subpixel_bilinear_ssse3.asm.d
[DEP] vpx_dsp/x86/vpx_subpixel_8t_ssse3.asm.d
[DEP] vpx_dsp/x86/vpx_subpixel_bilinear_sse2.asm.d
[DEP] vpx_dsp/x86/vpx_subpixel_8t_sse2.asm.d
[DEP] vpx_dsp/x86/add_noise_sse2.asm.d
[DEP] vpx_dsp/x86/add_noise_mmx.asm.d
[DEP] vpx_ports/x86_abi_support.asm.d
[DEP] vpx_dsp/x86/intrapred_sse2.asm.d
[DEP] vpx_dsp/x86/intrapred_ssse3.asm.d
[DEP] vpx_ports/emms.asm.d
[CC] vpx/src/vpx_decoder.c.o
[CC] vpx/src/vpx_encoder.c.o
[CC] vpx/src/vpx_codec.c.o
[CC] vpx/src/vpx_image.c.o
[CC] vpx/src/vpx_psnr.c.o
[CC] vpx_mem/vpx_mem.c.o
[CC] vpx_scale/generic/vpx_scale.c.o
[CC] vpx_scale/generic/yv12extend.c.o
[CC] vpx_scale/generic/yv12config.c.o
[CC] vpx_scale/vpx_scale_rtcd.c.o
[CC] vpx_scale/generic/gen_scalers.c.o
[CC] vpx_dsp/prob.c.o
[CC] vpx_dsp/bitwriter.c.o
[CC] vpx_dsp/bitwriter_buffer.c.o
[CC] vpx_dsp/bitreader.c.o
[CC] vpx_dsp/bitreader_buffer.c.o
[CC] vpx_dsp/intrapred.c.o
[CC] vpx_dsp/add_noise.c.o
[CC] vpx_dsp/vpx_convolve.c.o
[CC] vpx_dsp/x86/vpx_asm_stubs.c.o
[CC] vpx_dsp/x86/vpx_subpixel_8t_intrin_avx2.c.o
[CC] vpx_dsp/x86/vpx_subpixel_8t_intrin_ssse3.c.o
[CC] vpx_dsp/loopfilter.c.o
[CC] vpx_dsp/x86/loopfilter_avx2.c.o
[CC] vpx_dsp/x86/loopfilter_sse2.c.o
[CC] vpx_dsp/fwd_txfm.c.o
[CC] vpx_dsp/x86/fwd_txfm_sse2.c.o
[CC] vpx_dsp/x86/fwd_txfm_avx2.c.o
[CC] vpx_dsp/inv_txfm.c.o
[CC] vpx_dsp/x86/inv_txfm_sse2.c.o
[CC] vpx_dsp/quantize.c.o
[CC] vpx_dsp/x86/quantize_sse2.c.o
[CC] vpx_dsp/avg.c.o
[CC] vpx_dsp/x86/avg_intrin_sse2.c.o
[CC] vpx_dsp/sad.c.o
[CC] vpx_dsp/subtract.c.o
[CC] vpx_dsp/x86/sad4d_avx2.c.o
[CC] vpx_dsp/x86/sad_avx2.c.o
[CC] vpx_dsp/variance.c.o
[CC] vpx_dsp/x86/variance_mmx.c.o
[CC] vpx_dsp/x86/variance_sse2.c.o
[CC] vpx_dsp/x86/halfpix_variance_sse2.c.o
[CC] vpx_dsp/x86/variance_avx2.c.o
[CC] vpx_dsp/x86/variance_impl_avx2.c.o
[CC] vpx_dsp/vpx_dsp_rtcd.c.o
[CC] vpx_util/vpx_thread.c.o
[CC] vp8/common/alloccommon.c.o
[CC] vp8/common/blockd.c.o
[CC] vp8/common/copy_c.c.o
[CC] vp8/common/dequantize.c.o
[CC] vp8/common/debugmodes.c.o
[CC] vp8/common/entropy.c.o
[CC] vp8/common/entropymode.c.o
[CC] vp8/common/entropymv.c.o
[CC] vp8/common/extend.c.o
[CC] vp8/common/filter.c.o
[CC] vp8/common/findnearmv.c.o
[CC] vp8/common/generic/systemdependent.c.o
[CC] vp8/common/idct_blk.c.o
[CC] vp8/common/idctllm.c.o
[CC] vp8/common/rtcd.c.o
[CC] vp8/common/vp8_loopfilter.c.o
[CC] vp8/common/loopfilter_filters.c.o
[CC] vp8/common/mbpitch.c.o
[CC] vp8/common/modecont.c.o
[CC] vp8/common/quant_common.c.o
[CC] vp8/common/reconinter.c.o
[CC] vp8/common/reconintra.c.o
[CC] vp8/common/reconintra4x4.c.o
[CC] vp8/common/setupintrarecon.c.o
[CC] vp8/common/swapyv12buffer.c.o
[CC] vp8/common/treecoder.c.o
[CC] vp8/common/x86/filter_x86.c.o
[CC] vp8/common/x86/vp8_asm_stubs.c.o
[CC] vp8/common/mfqe.c.o
[CC] vp8/common/x86/loopfilter_x86.c.o
[CC] vp8/common/postproc.c.o
[CC] vp8/common/x86/idct_blk_mmx.c.o
[CC] vp8/common/x86/idct_blk_sse2.c.o
[CC] vp8/vp8_cx_iface.c.o
[CC] vp8/encoder/bitstream.c.o
[CC] vp8/encoder/boolhuff.c.o
[CC] vp8/encoder/dct.c.o
[CC] vp8/encoder/encodeframe.c.o
[CC] vp8/encoder/encodeintra.c.o
[CC] vp8/encoder/encodemb.c.o
[CC] vp8/encoder/encodemv.c.o
[CC] vp8/encoder/ethreading.c.o
[CC] vp8/encoder/firstpass.c.o
[CC] vp8/encoder/denoising.c.o
[CC] vp8/encoder/lookahead.c.o
[CC] vp8/encoder/mcomp.c.o
[CC] vp8/encoder/modecosts.c.o
[CC] vp8/encoder/onyx_if.c.o
[CC] vp8/encoder/pickinter.c.o
[CC] vp8/encoder/picklpf.c.o
[CC] vp8/encoder/vp8_quantize.c.o
[CC] vp8/encoder/ratectrl.c.o
[CC] vp8/encoder/rdopt.c.o
[CC] vp8/encoder/segmentation.c.o
[CC] vp8/encoder/tokenize.c.o
[CC] vp8/encoder/treewriter.c.o
[CC] vp8/encoder/temporal_filter.c.o
[CC] vp8/encoder/x86/vp8_enc_stubs_mmx.c.o
[CC] vp8/encoder/x86/vp8_quantize_sse2.c.o
[CC] vp8/encoder/x86/quantize_ssse3.c.o
[CC] vp8/encoder/x86/quantize_sse4.c.o
[CC] vp8/encoder/x86/denoising_sse2.c.o
[CC] vp8/encoder/x86/vp8_enc_stubs_sse2.c.o
[CC] vp8/vp8_dx_iface.c.o
[CC] vp8/decoder/dboolhuff.c.o
[CC] vp8/decoder/decodemv.c.o
[CC] vp8/decoder/decodeframe.c.o
[CC] vp8/decoder/detokenize.c.o
[CC] vp8/decoder/onyxd_if.c.o
[CC] vp8/decoder/threading.c.o
[CC] vp9/common/vp9_alloccommon.c.o
[CC] vp9/common/vp9_blockd.c.o
[CC] vp9/common/vp9_entropy.c.o
[CC] vp9/common/vp9_debugmodes.c.o
[CC] vp9/common/vp9_entropymode.c.o
[CC] vp9/common/vp9_entropymv.c.o
[CC] vp9/common/vp9_frame_buffers.c.o
[CC] vp9/common/vp9_idct.c.o
[CC] vp9/common/vp9_filter.c.o
[CC] vp9/common/vp9_pred_common.c.o
[CC] vp9/common/vp9_rtcd.c.o
[CC] vp9/common/vp9_scale.c.o
[CC] vp9/common/vp9_seg_common.c.o
[CC] vp9/common/vp9_tile_common.c.o
[CC] vp9/common/vp9_loopfilter.c.o
[CC] vp9/common/vp9_thread_common.c.o
[CC] vp9/common/vp9_quant_common.c.o
[CC] vp9/common/vp9_reconinter.c.o
[CC] vp9/common/vp9_mvref_common.c.o
[CC] vp9/common/vp9_common_data.c.o
[CC] vp9/common/vp9_reconintra.c.o
[CC] vp9/common/vp9_scan.c.o
[CC] vp9/common/x86/vp9_idct_intrin_sse2.c.o
[CC] vp9/vp9_cx_iface.c.o
[CC] vp9/encoder/vp9_bitstream.c.o
[CC] vp9/encoder/vp9_context_tree.c.o
[CC] vp9/encoder/vp9_cost.c.o
[CC] vp9/encoder/vp9_dct.c.o
[CC] vp9/encoder/vp9_encodeframe.c.o
[CC] vp9/encoder/vp9_encodemb.c.o
[CC] vp9/encoder/vp9_encodemv.c.o
[CC] vp9/encoder/vp9_ethread.c.o
[CC] vp9/encoder/vp9_extend.c.o
[CC] vp9/encoder/vp9_firstpass.c.o
[CC] vp9/encoder/vp9_lookahead.c.o
[CC] vp9/encoder/vp9_mcomp.c.o
[CC] vp9/encoder/vp9_encoder.c.o
[CC] vp9/encoder/vp9_picklpf.c.o
[CC] vp9/encoder/vp9_quantize.c.o
[CC] vp9/encoder/vp9_ratectrl.c.o
[CC] vp9/encoder/vp9_rd.c.o
[CC] vp9/encoder/vp9_rdopt.c.o
[CC] vp9/encoder/vp9_pickmode.c.o
[CC] vp9/encoder/vp9_segmentation.c.o
[CC] vp9/encoder/vp9_speed_features.c.o
[CC] vp9/encoder/vp9_subexp.c.o
[CC] vp9/encoder/vp9_svc_layercontext.c.o
[CC] vp9/encoder/vp9_resize.c.o
[CC] vp9/encoder/vp9_tokenize.c.o
[CC] vp9/encoder/vp9_treewriter.c.o
[CC] vp9/encoder/vp9_aq_variance.c.o
[CC] vp9/encoder/vp9_aq_360.c.o
[CC] vp9/encoder/vp9_aq_cyclicrefresh.c.o
[CC] vp9/encoder/vp9_aq_complexity.c.o
[CC] vp9/encoder/vp9_skin_detection.c.o
[CC] vp9/encoder/vp9_noise_estimate.c.o
[CC] vp9/encoder/vp9_temporal_filter.c.o
[CC] vp9/encoder/vp9_mbgraph.c.o
[CC] vp9/encoder/x86/vp9_quantize_sse2.c.o
[CC] vp9/encoder/x86/vp9_dct_intrin_sse2.c.o
[CC] vp9/encoder/x86/vp9_dct_ssse3.c.o
[CC] vp9/encoder/x86/vp9_frame_scale_ssse3.c.o
[CC] vp9/encoder/x86/vp9_error_intrin_avx2.c.o
[CC] vp9/vp9_dx_iface.c.o
[CC] vp9/decoder/vp9_decodemv.c.o
[CC] vp9/decoder/vp9_decodeframe.c.o
[CC] vp9/decoder/vp9_detokenize.c.o
[CC] vp9/decoder/vp9_dthread.c.o
[CC] vp9/decoder/vp9_decoder.c.o
[CC] vp9/decoder/vp9_dsubexp.c.o
[CC] vpx_config.c.o
[AS] vpx_ports/x86_abi_support.asm.o
[AS] vpx_ports/emms.asm.o
[AS] vpx_dsp/x86/intrapred_sse2.asm.o
[AS] vpx_dsp/x86/intrapred_ssse3.asm.o
[AS] vpx_dsp/x86/vpx_subpixel_8t_ssse3.asm.o
[AS] vpx_dsp/x86/add_noise_mmx.asm.o
[AS] vpx_dsp/x86/add_noise_sse2.asm.o
[AS] vpx_dsp/x86/vpx_subpixel_8t_sse2.asm.o
[AS] vpx_dsp/x86/vpx_subpixel_bilinear_sse2.asm.o
[AS] vpx_dsp/x86/vpx_subpixel_bilinear_ssse3.asm.o
[AS] vpx_dsp/x86/vpx_convolve_copy_sse2.asm.o
[AS] vpx_dsp/x86/fwd_txfm_ssse3_x86_64.asm.o
[AS] vpx_dsp/x86/inv_wht_sse2.asm.o
[AS] vpx_dsp/x86/inv_txfm_ssse3_x86_64.asm.o
[AS] vpx_dsp/x86/quantize_ssse3_x86_64.asm.o
[AS] vpx_dsp/x86/quantize_avx_x86_64.asm.o
[AS] vpx_dsp/x86/avg_ssse3_x86_64.asm.o
[AS] vpx_dsp/x86/sad_sse3.asm.o
[AS] vpx_dsp/x86/sad_ssse3.asm.o
[AS] vpx_dsp/x86/sad_sse4.asm.o
[AS] vpx_dsp/x86/sad_sse2.asm.o
[AS] vpx_dsp/x86/sad4d_sse2.asm.o
[AS] vpx_dsp/x86/subtract_sse2.asm.o
[AS] vpx_dsp/x86/variance_impl_mmx.asm.o
[AS] vpx_dsp/x86/halfpix_variance_impl_sse2.asm.o
[AS] vpx_dsp/x86/ssim_opt_x86_64.asm.o
[AS] vpx_dsp/x86/subpel_variance_sse2.asm.o
[AS] vp8/common/x86/dequantize_mmx.asm.o
[AS] vp8/common/x86/idctllm_mmx.asm.o
[AS] vp8/common/x86/iwalsh_mmx.asm.o
[AS] vp8/common/x86/recon_mmx.asm.o
[AS] vp8/common/x86/vp8_loopfilter_mmx.asm.o
[AS] vp8/common/x86/subpixel_mmx.asm.o
[AS] vp8/common/x86/copy_sse2.asm.o
[AS] vp8/common/x86/idctllm_sse2.asm.o
[AS] vp8/common/x86/recon_sse2.asm.o
[AS] vp8/common/x86/subpixel_sse2.asm.o
[AS] vp8/common/x86/loopfilter_sse2.asm.o
[AS] vp8/common/x86/iwalsh_sse2.asm.o
[AS] vp8/common/x86/copy_sse3.asm.o
[AS] vp8/common/x86/postproc_mmx.asm.o
[AS] vp8/common/x86/mfqe_sse2.asm.o
[AS] vp8/common/x86/subpixel_ssse3.asm.o
[AS] vp8/common/x86/postproc_sse2.asm.o
[AS] vp8/common/x86/loopfilter_block_sse2_x86_64.asm.o
[AS] vp8/encoder/x86/dct_mmx.asm.o
[AS] vp8/encoder/x86/dct_sse2.asm.o
[AS] vp8/encoder/x86/fwalsh_sse2.asm.o
[AS] vp8/encoder/x86/temporal_filter_apply_sse2.asm.o
[AS] vp8/encoder/x86/quantize_mmx.asm.o
[AS] vp8/encoder/x86/encodeopt.asm.o
[AS] vp9/encoder/x86/vp9_dct_sse2.asm.o
[AS] vp9/encoder/x86/vp9_temporal_filter_apply_sse2.asm.o
[AS] vp9/encoder/x86/vp9_error_sse2.asm.o
[AS] vp9/encoder/x86/vp9_quantize_ssse3_x86_64.asm.o
[CREATE] libvpx.ver
[CREATE] vpx.pc
[LD] libvpx.so.3.0.0
[LN] libvpx.so.3.0.0 libvpx.so
[LN] libvpx.so.3.0.0 libvpx.so.3
[LN] libvpx.so.3.0.0 libvpx.so.3.0
make[1]: Nothing to be done for 'all'.
LOG: Done building libvpx
LOG: Number of steps completed : 30
LOG: Installing libvpx
LOG: LD_LIBRARY_PATH=
LOG: About to run command: make install
[INSTALL] /home/carlos/kdenlive/20160601/include/vpx/vp8.h
[INSTALL] /home/carlos/kdenlive/20160601/include/vpx/vp8cx.h
[INSTALL] /home/carlos/kdenlive/20160601/include/vpx/vp8dx.h
[INSTALL] /home/carlos/kdenlive/20160601/include/vpx/vpx_codec.h
[INSTALL] /home/carlos/kdenlive/20160601/include/vpx/vpx_frame_buffer.h
[INSTALL] /home/carlos/kdenlive/20160601/include/vpx/vpx_image.h
[INSTALL] /home/carlos/kdenlive/20160601/include/vpx/vpx_integer.h
[INSTALL] /home/carlos/kdenlive/20160601/include/vpx/vpx_decoder.h
[INSTALL] /home/carlos/kdenlive/20160601/include/vpx/vpx_encoder.h
[LN] libvpx.so.3.0.0 /home/carlos/kdenlive/20160601/lib/libvpx.so
[LN] libvpx.so.3.0.0 /home/carlos/kdenlive/20160601/lib/libvpx.so.3
[LN] libvpx.so.3.0.0 /home/carlos/kdenlive/20160601/lib/libvpx.so.3.0
[INSTALL] /home/carlos/kdenlive/20160601/lib/libvpx.so.3.0.0
[INSTALL] /home/carlos/kdenlive/20160601/lib/pkgconfig/vpx.pc
make[1]: Nothing to be done for 'install'.
LOG: Done installing libvpx
LOG: Number of steps completed : 31
LOG: About to run command: popd
~/kdenlive/src
LOG: Configuring, compiling, and installing x264
LOG: About to run command: pushd .
~/kdenlive/src ~/kdenlive/src
LOG: About to run command: cd x264
LOG: PATH=/home/carlos/kdenlive/20160601/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
LOG: LD_RUN_PATH=/home/carlos/kdenlive/20160601/lib
LOG: PKG_CONFIG_PATH=/home/carlos/kdenlive/20160601/lib/pkgconfig:
LOG: CFLAGS=
LOG: LDFLAGS=
LOG: Configuring x264
LOG: About to run command: ./configure --prefix=/home/carlos/kdenlive/20160601 --disable-lavf --disable-ffms --disable-gpac --disable-swscale --enable-shared
platform: X86_64
byte order: little-endian
system: LINUX
cli: yes
libx264: internal
shared: yes
static: no
asm: yes
interlaced: yes
avs: avxsynth
lavf: no
ffms: no
mp4: no
gpl: yes
thread: posix
opencl: yes
filters: crop select_every
debug: no
gprof: no
strip: no
PIC: yes
bit depth: 8
chroma format: all

You can run 'make' or 'make fprofiled' now.
LOG: Done configuring x264
LOG: Number of steps completed : 32
LOG: Building x264 - this could take some time
LOG: About to run command: make -j9
cat common/opencl/x264-cl.h common/opencl/motionsearch.cl common/opencl/subpel.cl common/opencl/intra.cl common/opencl/weightp.cl common/opencl/downscale.cl common/opencl/bidir.cl | ./tools/cltostr.sh common/oclobj.h
dependency file generation...
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o x264.o x264.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o input/input.o input/input.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o input/timecode.o input/timecode.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o input/raw.o input/raw.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o input/y4m.o input/y4m.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o output/raw.o output/raw.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o output/matroska.o output/matroska.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o output/matroska_ebml.o output/matroska_ebml.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o output/flv.o output/flv.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o output/flv_bytestream.o output/flv_bytestream.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o filters/filters.o filters/filters.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o filters/video/video.o filters/video/video.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o filters/video/source.o filters/video/source.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o filters/video/internal.o filters/video/internal.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o filters/video/resize.o filters/video/resize.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o filters/video/cache.o filters/video/cache.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o filters/video/fix_vfr_pts.o filters/video/fix_vfr_pts.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o filters/video/select_every.o filters/video/select_every.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o filters/video/crop.o filters/video/crop.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o filters/video/depth.o filters/video/depth.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o input/avs.o input/avs.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o input/thread.o input/thread.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o common/mc.o common/mc.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o common/predict.o common/predict.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o common/pixel.o common/pixel.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o common/macroblock.o common/macroblock.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o common/frame.o common/frame.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o common/dct.o common/dct.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o common/cpu.o common/cpu.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o common/cabac.o common/cabac.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o common/common.o common/common.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o common/osdep.o common/osdep.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o common/rectangle.o common/rectangle.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o common/set.o common/set.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o common/quant.o common/quant.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o common/deblock.o common/deblock.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o common/vlc.o common/vlc.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o common/mvpred.o common/mvpred.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o common/bitstream.o common/bitstream.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o encoder/analyse.o encoder/analyse.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o encoder/me.o encoder/me.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o encoder/ratecontrol.o encoder/ratecontrol.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o encoder/set.o encoder/set.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o encoder/macroblock.o encoder/macroblock.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o encoder/cabac.o encoder/cabac.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o encoder/cavlc.o encoder/cavlc.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o encoder/encoder.o encoder/encoder.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o encoder/lookahead.o encoder/lookahead.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o common/threadpool.o common/threadpool.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o common/x86/mc-c.o common/x86/mc-c.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o common/x86/predict-c.o common/x86/predict-c.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o common/opencl.o common/opencl.c
gcc -Wno-maybe-uninitialized -Wshadow -O3 -ffast-math -m64 -Wall -I. -I. -std=gnu99 -D_GNU_SOURCE -mpreferred-stack-boundary=5 -fPIC -fomit-frame-pointer -fno-tree-vectorize -c -o encoder/slicetype-cl.o encoder/slicetype-cl.c
yasm -I. -I. -DARCH_X86_64=1 -I./common/x86/ -f elf64 -Worphan-labels -DSTACK_ALIGNMENT=32 -DPIC -DHIGH_BIT_DEPTH=0 -DBIT_DEPTH=8 -o common/x86/const-a.o common/x86/const-a.asm
yasm -I. -I. -DARCH_X86_64=1 -I./common/x86/ -f elf64 -Worphan-labels -DSTACK_ALIGNMENT=32 -DPIC -DHIGH_BIT_DEPTH=0 -DBIT_DEPTH=8 -o common/x86/cabac-a.o common/x86/cabac-a.asm
yasm -I. -I. -DARCH_X86_64=1 -I./common/x86/ -f elf64 -Worphan-labels -DSTACK_ALIGNMENT=32 -DPIC -DHIGH_BIT_DEPTH=0 -DBIT_DEPTH=8 -o common/x86/dct-a.o common/x86/dct-a.asm
yasm -I. -I. -DARCH_X86_64=1 -I./common/x86/ -f elf64 -Worphan-labels -DSTACK_ALIGNMENT=32 -DPIC -DHIGH_BIT_DEPTH=0 -DBIT_DEPTH=8 -o common/x86/deblock-a.o common/x86/deblock-a.asm
yasm -I. -I. -DARCH_X86_64=1 -I./common/x86/ -f elf64 -Worphan-labels -DSTACK_ALIGNMENT=32 -DPIC -DHIGH_BIT_DEPTH=0 -DBIT_DEPTH=8 -o common/x86/mc-a.o common/x86/mc-a.asm
yasm -I. -I. -DARCH_X86_64=1 -I./common/x86/ -f elf64 -Worphan-labels -DSTACK_ALIGNMENT=32 -DPIC -DHIGH_BIT_DEPTH=0 -DBIT_DEPTH=8 -o common/x86/mc-a2.o common/x86/mc-a2.asm
yasm -I. -I. -DARCH_X86_64=1 -I./common/x86/ -f elf64 -Worphan-labels -DSTACK_ALIGNMENT=32 -DPIC -DHIGH_BIT_DEPTH=0 -DBIT_DEPTH=8 -o common/x86/pixel-a.o common/x86/pixel-a.asm
yasm -I. -I. -DARCH_X86_64=1 -I./common/x86/ -f elf64 -Worphan-labels -DSTACK_ALIGNMENT=32 -DPIC -DHIGH_BIT_DEPTH=0 -DBIT_DEPTH=8 -o common/x86/predict-a.o common/x86/predict-a.asm
yasm -I. -I. -DARCH_X86_64=1 -I./common/x86/ -f elf64 -Worphan-labels -DSTACK_ALIGNMENT=32 -DPIC -DHIGH_BIT_DEPTH=0 -DBIT_DEPTH=8 -o common/x86/quant-a.o common/x86/quant-a.asm
yasm -I. -I. -DARCH_X86_64=1 -I./common/x86/ -f elf64 -Worphan-labels -DSTACK_ALIGNMENT=32 -DPIC -DHIGH_BIT_DEPTH=0 -DBIT_DEPTH=8 -o common/x86/cpu-a.o common/x86/cpu-a.asm
yasm -I. -I. -DARCH_X86_64=1 -I./common/x86/ -f elf64 -Worphan-labels -DSTACK_ALIGNMENT=32 -DPIC -DHIGH_BIT_DEPTH=0 -DBIT_DEPTH=8 -o common/x86/dct-64.o common/x86/dct-64.asm
yasm -I. -I. -DARCH_X86_64=1 -I./common/x86/ -f elf64 -Worphan-labels -DSTACK_ALIGNMENT=32 -DPIC -DHIGH_BIT_DEPTH=0 -DBIT_DEPTH=8 -o common/x86/bitstream-a.o common/x86/bitstream-a.asm
yasm -I. -I. -DARCH_X86_64=1 -I./common/x86/ -f elf64 -Worphan-labels -DSTACK_ALIGNMENT=32 -DPIC -DHIGH_BIT_DEPTH=0 -DBIT_DEPTH=8 -o common/x86/sad-a.o common/x86/sad-a.asm
yasm -I. -I. -DARCH_X86_64=1 -I./common/x86/ -f elf64 -Worphan-labels -DSTACK_ALIGNMENT=32 -DPIC -DHIGH_BIT_DEPTH=0 -DBIT_DEPTH=8 -o common/x86/trellis-64.o common/x86/trellis-64.asm
rm -f libx264.a
gcc -o libx264.so.148 common/mc.o common/predict.o common/pixel.o common/macroblock.o common/frame.o common/dct.o common/cpu.o common/cabac.o common/common.o common/osdep.o common/rectangle.o common/set.o common/quant.o common/deblock.o common/vlc.o common/mvpred.o common/bitstream.o encoder/analyse.o encoder/me.o encoder/ratecontrol.o encoder/set.o encoder/macroblock.o encoder/cabac.o encoder/cavlc.o encoder/encoder.o encoder/lookahead.o common/threadpool.o common/x86/mc-c.o common/x86/predict-c.o common/opencl.o encoder/slicetype-cl.o common/x86/const-a.o common/x86/cabac-a.o common/x86/dct-a.o common/x86/deblock-a.o common/x86/mc-a.o common/x86/mc-a2.o common/x86/pixel-a.o common/x86/predict-a.o common/x86/quant-a.o common/x86/cpu-a.o common/x86/dct-64.o common/x86/bitstream-a.o common/x86/sad-a.o common/x86/trellis-64.o -shared -Wl,-soname,libx264.so.148 -Wl,-Bsymbolic -m64 -lm -lpthread -ldl
ar rc libx264.a common/mc.o common/predict.o common/pixel.o common/macroblock.o common/frame.o common/dct.o common/cpu.o common/cabac.o common/common.o common/osdep.o common/rectangle.o common/set.o common/quant.o common/deblock.o common/vlc.o common/mvpred.o common/bitstream.o encoder/analyse.o encoder/me.o encoder/ratecontrol.o encoder/set.o encoder/macroblock.o encoder/cabac.o encoder/cavlc.o encoder/encoder.o encoder/lookahead.o common/threadpool.o common/x86/mc-c.o common/x86/predict-c.o common/opencl.o encoder/slicetype-cl.o common/x86/const-a.o common/x86/cabac-a.o common/x86/dct-a.o common/x86/deblock-a.o common/x86/mc-a.o common/x86/mc-a2.o common/x86/pixel-a.o common/x86/predict-a.o common/x86/quant-a.o common/x86/cpu-a.o common/x86/dct-64.o common/x86/bitstream-a.o common/x86/sad-a.o common/x86/trellis-64.o
ranlib libx264.a
gcc -o x264 x264.o input/input.o input/timecode.o input/raw.o input/y4m.o output/raw.o output/matroska.o output/matroska_ebml.o output/flv.o output/flv_bytestream.o filters/filters.o filters/video/video.o filters/video/source.o filters/video/internal.o filters/video/resize.o filters/video/cache.o filters/video/fix_vfr_pts.o filters/video/select_every.o filters/video/crop.o filters/video/depth.o input/avs.o input/thread.o libx264.a -ldl -m64 -lm -lpthread -ldl
LOG: Done building x264
LOG: Number of steps completed : 33
LOG: Installing x264
LOG: LD_LIBRARY_PATH=
LOG: About to run command: make install
install -d /home/carlos/kdenlive/20160601/bin
install x264 /home/carlos/kdenlive/20160601/bin
install -d /home/carlos/kdenlive/20160601/include
install -d /home/carlos/kdenlive/20160601/lib
install -d /home/carlos/kdenlive/20160601/lib/pkgconfig
install -m 644 ./x264.h /home/carlos/kdenlive/20160601/include
install -m 644 x264_config.h /home/carlos/kdenlive/20160601/include
install -m 644 x264.pc /home/carlos/kdenlive/20160601/lib/pkgconfig
ln -f -s libx264.so.148 /home/carlos/kdenlive/20160601/lib/libx264.so
install -m 755 libx264.so.148 /home/carlos/kdenlive/20160601/lib
LOG: Done installing x264
LOG: Number of steps completed : 34
LOG: About to run command: popd
~/kdenlive/src
LOG: Configuring, compiling, and installing libepoxy
LOG: About to run command: pushd .
~/kdenlive/src ~/kdenlive/src
LOG: About to run command: cd libepoxy
LOG: PATH=/home/carlos/kdenlive/20160601/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
LOG: LD_RUN_PATH=/home/carlos/kdenlive/20160601/lib
LOG: PKG_CONFIG_PATH=/home/carlos/kdenlive/20160601/lib/pkgconfig:
LOG: CFLAGS=
LOG: LDFLAGS=
LOG: Configuring libepoxy
LOG: About to run command: ./autogen.sh --prefix=/home/carlos/kdenlive/20160601
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal
autoreconf: configure.ac: tracing
autoreconf: configure.ac: not using Libtool
autoreconf: running: /usr/bin/autoconf
configure.ac:46: error: possibly undefined macro: AC_DISABLE_STATIC
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
configure.ac:47: error: possibly undefined macro: AC_LIBTOOL_WIN32_DLL
configure.ac:48: error: possibly undefined macro: AC_PROG_LIBTOOL
autoreconf: /usr/bin/autoconf failed with exit status: 1
ERROR: Unable to configure libepoxy
LOG: Process has finished. Reason: FAILURE Some kind of error occured: Unable to configure libepoxy

Kdenlive lacks a line in the cmake file and fails compilation.
Should include flag -Wno-dev at line 478

Call Stack (most recent call first):
  CMakeLists.txt:52 (find_package)


CMake Warning (dev) in CMakeLists.txt:
  No cmake_minimum_required command is present.  A line of code such as

    cmake_minimum_required(VERSION 2.8)

  should be added at the top of the file.  The version specified may be lower
  if you wish to support older CMake versions for this project.  For more
  information run "cmake --help-policy CMP0000".
This warning is for project developers.  Use -Wno-dev to suppress it.

-- Configuring incomplete, errors occurred!

This project has no readme, so I don't know if I'm expected to install any dependencies. When I try to use one of the build scripts, I get this error:

mlt-scripts$ ./build/build-kdenlive.sh 
LOG: Sun Apr 8 12:05:41 EDT 2018
LOG: ./build/build-kdenlive.sh starting
LOG: Using none for feedback
WARN: Unable to read config file build-kdenlive.conf
LOG: Checking for sudo requirement
LOG: Done checking for sudo requirement
LOG: Number of steps determined to 51
LOG: Process has finished. Reason: ABORTED User requested abort
LOG: Total number of steps needed to complete 51
LOG: Press Ctrl+C to abort
LOG: Number of steps completed : 0
LOG: About to run command: kf5-config -v
./build/build-kdenlive.sh: line 297: kf5-config: command not found
ERROR: Unable to run kf5-config
LOG: Process has finished. Reason: FAILURE Some kind of error occured: Unable to run kf5-config

When I ask my bash terminal about that missing binary, I get this:

$ kf5-config
The program 'kf5-config' is currently not installed. You can install it by typing:
sudo apt install libkf5kdelibs4support5-bin

So am I supposed to install that package?

Hi,

We are using build-melt.sh v21 to build melt with all libraries. We discovered that when using frei0r emboss effect, melt will do a segmentation fault. With gdb, we clearly see it in in the emboss plugin.

So we went further and discovered that if using the same environment variables and commands that the script was using we can make it work.

The script set CFLAGS=. In such case emboss crash.

If we use the same commands but unset CFLAGS instead emboss will work fine.

Any clue?

Hey there, I was able to successfully compile kdenlive on Kubuntu 18.04 using the script.

Upon launching kdenlive I get a warning that the following codecs are missing:
libx265, nvenc_h264, h264_nvenc

This is a problem, as I would like to use nvenc for rendering with my GPU.
I have used it with previous versions of kdenlive and it's awesome.

I am not sure how to solve this issue.
Already installed the nvenc-headers provided here: lutris/ffmpeg-nvenc#22

I run into a problem when trying to compile kdenlive via build-kdenlive.sh script:

cc -I/home/doitux/Programme/kdenlive-build/builds//20190731/include -DARCH_X86_64 -Wall -DPIC    -DUSE_MMX -DUSE_SSE -DUSE_SSE2 -g -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -fPIC -pthread -DARCH_X86_64 -Wall -DPIC    -DUSE_MMX -DUSE_SSE -DUSE_SSE2 -g -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -fPIC -pthread -I.. -rdynamic -DVERSION=\"6.17.0\" -DHAVE_SDL2 -D_REENTRANT -I/usr/include/SDL2   -c -o io.o io.c
cc -o melt melt.o io.o -L/home/doitux/Programme/kdenlive-build/builds//20190731/lib -Wl,--no-undefined -Wl,--as-needed -Wl,--no-undefined -Wl,--as-needed -L../framework -lmlt -lpthread -lSDL2
make[1]: Leaving directory '/home/doitux/Programme/kdenlive-build/builds/src/mlt/src/melt'
qimage_wrapper.cpp:371:35: error: missing binary operator before token "("
 #if QT_VERSION >= QT_VERSION_CHECK(5, 5, 0)
                                   ^
consumer_qglsl.cpp:25:34: error: missing binary operator before token "("
 #if QT_VERSION < QT_VERSION_CHECK(5, 0, 0)
                                  ^
consumer_qglsl.cpp:157:34: error: missing binary operator before token "("
 #if QT_VERSION < QT_VERSION_CHECK(5, 0, 0)
                                  ^
consumer_qglsl.cpp:181:34: error: missing binary operator before token "("
 #if QT_VERSION < QT_VERSION_CHECK(5, 0, 0)
                                  ^
consumer_qglsl.cpp:208:34: error: missing binary operator before token "("
 #if QT_VERSION < QT_VERSION_CHECK(5, 0, 0)
                                  ^
make[2]: *** [Makefile:61: depend] Error 1
make[1]: *** [Makefile:5: depend] Error 1
make: *** [Makefile:9: all] Error 1
ERROR: Unable to build mlt
LOG: Process has finished. Reason: FAILURE Some kind of error occured: Unable to build mlt
doitux@doitux-W65-67SZ:~/Programme/kdenlive-build$ 

Any idea what is going wrong there and howto fix this?

Got a compile working with the build-melt.sh script, trying to run the melt binary on Ubuntu 14.04 on Heroku.

From the compile, I added the bin and lib dir to our heroku app. I added the lib dir to my LD_LIBRARY_PATH.

When I run melt, I get:
./melt: error while loading shared libraries: libmlt.so.6: cannot open shared object file: No such file or directory

In my lib dir, I have libmlt.so.0.9.7 instead of libmlt.so.6.

Any help would be great.

Successfully compiled melt and it works fine, except when I try to render kdenlvie title clips, the rendered file just shows a black screen saying "Invalid".

The problem is the "kdenlivetitle" module, which is apparently not enabled by default, but I cannot seem to figure out how to get it working. Any ideas?

`Configuring framework:
Configuring modules:
Configuring modules/avformat:
Configuring modules/core:
Configuring modules/decklink:
Configuring modules/feeds:
Configuring modules/frei0r:
Configuring modules/gtk2:
- Libexif found, enabling auto rotate
Configuring modules/jackrack:
Configuring modules/kdenlive:
Configuring modules/lumas:
Configuring modules/ndi:
- NDI SDK not found: disabling
Configuring modules/oldfilm:
Configuring modules/opencv:
- OpenCV >= 3.1.0 NOT found, disabling OpenCV modules
Configuring modules/opengl:
Configuring modules/plus:
- libebur128 found: using external libebur128
Configuring modules/rtaudio:
Configuring modules/sdl:
 - using SDL version 1.2.15
Configuring modules/sdl2:
 - using SDL version 2.0.8
Configuring modules/sox:
Configuring modules/swfdec:
- swfdec not found: disabling
Configuring modules/vmfx:
Configuring modules/xml:
Configuring mlt++:
Configuring swig:
LGPLv2.1 license used; GPL components disabled
`

I got an error in the install.
REPOLOCS[8]="http://git.sesse.net/movit/"
Should be
REPOLOCS[8]="https://git.sesse.net/movit/"

Using the build kdenlive or build melt scripts on Ubuntu 18.04 always produce crashing binaries.

OpenCV Error: Assertion failed (total() == 0 || data != NULL) in Mat, file /usr/include/opencv2/core/mat.inl.hpp, line 464 terminate called after throwing an instance of 'cv::Exception' what(): /usr/include/opencv2/core/mat.inl.hpp:464: error: (-215) total() == 0 || data != NULL in function Mat

Does anything need to be updated in those scripts to work with the latest?

Thanks

There is some problem with libtool, here is an extract of the log:

Generating configuration files for frei0r, please wait....
  aclocal
  autoheader
  libtoolize --automake -c
  automake --add-missing -c
Useless use of /d modifier in transliteration operator at /usr/local/share/automake-1.9/Automake/Wrap.pm line 60.
src/Makefile.am:11: Libtool library used but `LIBTOOL' is undefined
src/Makefile.am:11: 
src/Makefile.am:11: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
src/Makefile.am:11: to `configure.ac' and run `aclocal' and `autoconf' again.
./autogen.sh: 75: exit: Illegal number: -1
ERROR: Unable to create configure file for frei0r
LOG: Process has finished. Reason: FAILURE Some kind of error occured: Unable to create configure file for frei0r

Ubuntu 15.10

Hi, I'm trying to build Melt and got an error about this repo:

https://github.com/breakfastquay/rubberband

no longer having a 'master' branch, so the scripts failed.

I set ENABLE_RUBBERBAND=0 as a workaround. Thanks and have a great day!

tried to build on ubuntu 17.04.
build ok but when execute start-openshot , segfaults.
build-kdenlive.sh only build and run both ok.

kuh3h3@reandro:~/openshot/20170924$ ls -al

drwxrwxr-x 7 kuh3h3 kuh3h3 4096 9월 24 04:21 .
drwxrwxr-x 4 kuh3h3 kuh3h3 4096 9월 24 04:06 ..
drwxr-xr-x 2 kuh3h3 kuh3h3 4096 9월 24 04:41 bin
drwxr-xr-x 14 kuh3h3 kuh3h3 4096 9월 24 04:28 include
drwxr-xr-x 5 kuh3h3 kuh3h3 4096 9월 24 04:41 lib
drwxrwxr-x 15 kuh3h3 kuh3h3 4096 9월 24 04:43 openshot
drwxrwxr-x 6 kuh3h3 kuh3h3 4096 9월 24 04:21 share
-rwxr-xr-x 1 kuh3h3 kuh3h3 705 9월 24 04:42 source-me
-rwxr-xr-x 1 kuh3h3 kuh3h3 910 9월 24 04:42 start-openshot

GNU gdb (Ubuntu 7.12.50.20170314-0ubuntu1.1) 7.12.50.20170314-git
(gdb) r openshot/openshot.py
Starting program: /usr/bin/python openshot/openshot.py
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".

OpenShot (version 1.4.4~alpha1)

Process no longer exists: 9887. Creating new pid lock file.
[New Thread 0x7fffeaf4c700 (LWP 9951)]
[New Thread 0x7fffd5c99700 (LWP 9952)]
[New Thread 0x7fffcd002700 (LWP 9953)]
[New Thread 0x7fffcc801700 (LWP 9954)]

Detecting formats, codecs, and filters...

video_codecs:

• a64multi
• a64multi5
• alias_pix
• amv
• apng
• asv1
• asv2
• avrp
• avui
• ayuv
• bmp
• cinepak
• cljr
• dnxhd
• dpx
• dvvideo
• ffv1
• ffvhuff
• fits
• flashsv
• flashsv2
• flv
• gif
• h261
• h263
• h263p
• huffyuv
• jpeg2000
• jpegls
• ljpeg
• mjpeg
• mpeg1video
• mpeg2video
• mpeg4
• msmpeg4v2
• msmpeg4
• msvideo1
• pam
• pbm
• pcx
• pgm
• pgmyuv
• png
• ppm
• prores
• prores_aw
• prores_ks
• qtrle
• r10k
• r210
• rawvideo
• roqvideo
• rv10
• rv20
• sgi
• snow
• sunrast
• svq1
• targa
• tiff
• utvideo
• v210
• v308
• v408
• v410
• vc2
• wrapped_avframe
• wmv1
• wmv2
• xbm
• xface
• xwd
• y41p
• yuv4
• zlib
• zmbv
• libtheora
• libvpx
• libvpx-vp9
• libx264
• libx264rgb
• h264_nvenc
• h264_vaapi
• nvenc
• nvenc_h264
• nvenc_hevc
• hevc_nvenc
• hevc_vaapi
• mjpeg_vaapi
• mpeg2_vaapi
• vp8_vaapi
• vp9_vaapi
  ...

audio_codecs:

• comfortnoise
• s302m
• aac
• ac3
• ac3_fixed
• alac
• dca
• eac3
• flac
• g723_1
• mlp
• mp2
• mp2fixed
• nellymoser
• opus
• real_144
• sonic
• sonicls
• truehd
• tta
• vorbis
• wavpack
• wmav1
• wmav2
• pcm_alaw
• pcm_f32be
• pcm_f32le
• pcm_f64be
• pcm_f64le
• pcm_mulaw
• pcm_s8
• pcm_s8_planar
• pcm_s16be
• pcm_s16be_planar
• pcm_s16le
• pcm_s16le_planar
• pcm_s24be
• pcm_s24daud
• pcm_s24le
• pcm_s24le_planar
• pcm_s32be
• pcm_s32le
• pcm_s32le_planar
• pcm_s64be
• pcm_s64le
• pcm_u8
• pcm_u16be
• pcm_u16le
• pcm_u24be
• pcm_u24le
• pcm_u32be
• pcm_u32le
• roq_dpcm
• adpcm_adx
• g722
• g726
• g726le
• adpcm_ima_qt
• adpcm_ima_wav
• adpcm_ms
• adpcm_swf
• adpcm_yamaha
• libmp3lame
• libvorbis
  ...

formats:

• a64
• ac3
• adts
• adx
• aiff
• amr
• apng
• asf
• ass
• ast
• asf_stream
• au
• avi
• avm2
• bit
• caf
• cavsvideo
• crc
• dash
• data
• daud
• dirac
• dnxhd
• dts
• dv
• eac3
• f4v
• ffm
• ffmetadata
• fifo
• filmstrip
• fits
• flac
• flv
• framecrc
• framehash
• framemd5
• g722
• g723_1
• g726
• g726le
• gif
• gsm
• gxf
• h261
• h263
• h264
• hash
• hds
• hevc
• hls
• ico
• ilbc
• image2
• image2pipe
• ipod
• ircam
• ismv
• ivf
• jacosub
• latm
• lrc
• m4v
• md5
• matroska
• matroska
• microdvd
• mjpeg
• mlp
• mmf
• mov
• mp2
• mp3
• mp4
• mpeg
• vcd
• mpeg1video
• dvd
• svcd
• mpeg2video
• vob
• mpegts
• mpjpeg
• mxf
• mxf_d10
• mxf_opatom
• null
• nut
• oga
• ogg
• ogv
• oma
• opus
• alaw
• mulaw
• f64be
• f64le
• f32be
• f32le
• s32be
• s32le
• s24be
• s24le
• s16be
• s16le
• s8
• u32be
• u32le
• u24be
• u24le
• u16be
• u16le
• u8
• psp
• rawvideo
• rm
• roq
• rso
• rtp
• rtp_mpegts
• scc
• segment
• stream_segment,ssegment
• singlejpeg
• smjpeg
• smoothstreaming
• sox
• spx
• spdif
• srt
• sup
• swf
• tee
• 3g2
• 3gp
• mkvtimestamp_v2
• truehd
• tta
• uncodedframecrc
• vc1
• vc1test
• voc
• w64
• wav
• webm
• webm_dash_manifest
• webm_chunk
• webp
• webvtt
• wtv
• wv
• yuv4mpegpipe
• alsa
• fbdev
• oss
• sdl,sdl2
• sndio
• v4l2
• xv
  ...
  [New Thread 0x7fffc66c9700 (LWP 9955)]
  [New Thread 0x7fffc5ec8700 (LWP 9956)]
  state saved
  [New Thread 0x7fffc56c7700 (LWP 9957)]
  [New Thread 0x7fffc4eb9700 (LWP 9958)]
  [New Thread 0x7fffc4e78700 (LWP 9959)]
  [New Thread 0x7fff9bfff700 (LWP 9960)]
  [New Thread 0x7fffc4677700 (LWP 9961)]
  [New Thread 0x7fff9b7fe700 (LWP 9962)]

Thread 1 "python" received signal SIGSEGV, Segmentation fault.
__GI___pthread_mutex_lock (mutex=0x0) at ../nptl/pthread_mutex_lock.c:67
67 ../nptl/pthread_mutex_lock.c: 그런 파일이나 디렉터리가 없습니다.
(gdb) bt full
#0 0x00007ffff7bc2e90 in __GI___pthread_mutex_lock (mutex=0x0) at ../nptl/pthread_mutex_lock.c:67
PRETTY_FUNCTION = "__pthread_mutex_lock"
type =
id =
#1 0x00007ffff3835cba in XrmQGetResource () at /usr/lib/x86_64-linux-gnu/libX11.so.6
#2 0x00007ffff3812156 in XGetDefault () at /usr/lib/x86_64-linux-gnu/libX11.so.6
#3 0x00007ffff47d7a3f in () at /usr/lib/x86_64-linux-gnu/libcairo.so.2
#4 0x00007ffff47d9f10 in () at /usr/lib/x86_64-linux-gnu/libcairo.so.2
#5 0x00007ffff47ab6e7 in cairo_surface_get_font_options () at /usr/lib/x86_64-linux-gnu/libcairo.so.2
#6 0x00007ffff3b2d8db in () at /usr/lib/x86_64-linux-gnu/libpangocairo-1.0.so.0
#7 0x00007ffff3b2dc39 in pango_cairo_create_context () at /usr/lib/x86_64-linux-gnu/libpangocairo-1.0.so.0
#8 0x00007ffff3b2dc80 in pango_cairo_create_layout () at /usr/lib/x86_64-linux-gnu/libpangocairo-1.0.so.0
#9 0x00007fffeb20782e in () at /usr/lib/x86_64-linux-gnu/libgoocanvas.so.3
#10 0x00007fffeb2084d9 in () at /usr/lib/x86_64-linux-gnu/libgoocanvas.so.3
#11 0x00007fffeb1fb82f in () at /usr/lib/x86_64-linux-gnu/libgoocanvas.so.3
#12 0x00007fffeb1fc0ac in () at /usr/lib/x86_64-linux-gnu/libgoocanvas.so.3
#13 0x00007fffeb1f23b6 in () at /usr/lib/x86_64-linux-gnu/libgoocanvas.so.3
#14 0x00007fffeb1f23b6 in () at /usr/lib/x86_64-linux-gnu/libgoocanvas.so.3
#15 0x00007fffeb21105f in () at /usr/lib/x86_64-linux-gnu/libgoocanvas.so.3
#16 0x00007fffeb2115ec in goo_canvas_update () at /usr/lib/x86_64-linux-gnu/libgoocanvas.so.3
#17 0x00007fffeb211e8d in () at /usr/lib/x86_64-linux-gnu/libgoocanvas.so.3
#18 0x00007ffff65cb22a in g_main_context_dispatch () at /lib/x86_64-linux-gnu/libglib-2.0.so.0
#19 0x00007ffff65cb5e0 in () at /lib/x86_64-linux-gnu/libglib-2.0.so.0
#20 0x00007ffff65cb902 in g_main_loop_run () at /lib/x86_64-linux-gnu/libglib-2.0.so.0
#21 0x00007ffff4e36457 in gtk_main () at /usr/lib/x86_64-linux-gnu/libgtk-x11-2.0.so.0
#22 0x00007ffff553e56f in () at /usr/lib/python2.7/dist-packages/gtk-2.0/gtk/_gtk.so
#23 0x00005555556544ff in PyEval_EvalFrameEx ()
#24 0x0000555555654b9f in PyEval_EvalFrameEx ()
#25 0x0000555555654b9f in PyEval_EvalFrameEx ()
#26 0x000055555564d4e5 in PyEval_EvalCodeEx ()
#27 0x000055555564d289 in PyEval_EvalCode ()
#28 0x000055555567d13f in ()
#29 0x0000555555678032 in PyRun_FileExFlags ()
#30 0x0000555555677b7e in PyRun_SimpleFileExFlags ()
#31 0x0000555555628a02 in Py_Main ()
#32 0x00007ffff78123f1 in __libc_start_main (main=
0x555555628330

Inferior 1 [process 9946] will be killed.

Quit anyway? (y or n) y

I am getting this error while running build-melt.sh

/configure: line 15925: syntax error near unexpected token OPENCV,' ./configure: line 15925:PKG_CHECK_MODULES(OPENCV, opencv >= 1.0.0, HAVE_OPENCV=true, true)'
ERROR: Unable to configure frei0r
LOG: Process has finished. Reason: FAILURE Some kind of error occured: Unable to configure frei0r

Problem is in this and next lines:

I removed them as a temporary fix.

when compile on ubuntu14.04, the script cannot find the compiler, the $PATH is not correct, I have already set the $PATH to the correct gcc-5.1.0/usr/bin, so build-shotcut.sh set the $PATH wrong anywhere?

Thank you for these scripts!

I seem to be able to compile on Arch Linux but it segfaults when I try to run the start-kdenlive script. I added gdb to it:

Starting program: /home/qubodup/kdenlive/20160102/bin/kdenlive 
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/usr/lib/libthread_db.so.1".
[New Thread 0x7fffe3aac700 (LWP 6756)]
Icon theme "oxygen" not found.
Icon theme "oxygen" not found.
Error: standard icon theme "oxygen" not found!

Program received signal SIGSEGV, Segmentation fault.
0x00007fffce008c34 in ?? () from /usr/lib/libQtGui.so.4
(gdb) bt
#0  0x00007fffce008c34 in ?? () from /usr/lib/libQtGui.so.4
#1  0x00007ffff7dea27a in call_init.part () from /lib64/ld-linux-x86-64.so.2
#2  0x00007ffff7dea38b in _dl_init () from /lib64/ld-linux-x86-64.so.2
#3  0x00007ffff7dee830 in dl_open_worker () from /lib64/ld-linux-x86-64.so.2
#4  0x00007ffff7dea124 in _dl_catch_error () from /lib64/ld-linux-x86-64.so.2
#5  0x00007ffff7dedfd1 in _dl_open () from /lib64/ld-linux-x86-64.so.2
#6  0x00007ffff62d3fc9 in ?? () from /usr/lib/libdl.so.2
#7  0x00007ffff7dea124 in _dl_catch_error () from /lib64/ld-linux-x86-64.so.2
#8  0x00007ffff62d45e1 in ?? () from /usr/lib/libdl.so.2
#9  0x00007ffff62d4061 in dlopen () from /usr/lib/libdl.so.2
#10 0x00007ffff672843f in mlt_repository_init (directory=0x55555606dfe0 "/home/qubodup/kdenlive/20160102/./lib/mlt")
    at mlt_repository.c:105
#11 0x00007ffff6727a84 in mlt_factory_init (directory=0x7fffffffea09 "/home/qubodup/kdenlive/20160102/./lib/mlt")
    at mlt_factory.c:184
#12 0x00007ffff64ea5b6 in Mlt::Factory::init(char const*) () from /home/qubodup/kdenlive/20160102/./lib/libmlt++.so.3
#13 0x00005555558bc2d1 in BinController::BinController (this=0x555556057110, profileName=...)
    at /home/qubodup/kdenlive/src/kdenlive/src/mltcontroller/bincontroller.cpp:36
#14 0x0000555555953997 in Core::initialize (this=0x555555d357a0) at /home/qubodup/kdenlive/src/kdenlive/src/core.cpp:60
#15 0x000055555592adf7 in MainWindow::MainWindow (this=0x555555d326a0, MltPath=..., Url=..., clipsToLoad=..., 
    parent=, __in_chrg=, __vtt_parm=)
    at /home/qubodup/kdenlive/src/kdenlive/src/mainwindow.cpp:197
#16 0x00005555555f6db3 in main (argc=1, argv=) at /home/qubodup/kdenlive/src/kdenlive/src/main.cpp:117

I do have oxygen installed though:
oxygen 5.5.2-1
oxygen-cursors 5.5.2-1
oxygen-icons 1:5.17.0-1
oxygen-kde4 5.5.2-1
ttf-oxygen 1:5.4.3-1

I can run kdenlive-git when I compile it on my own just using -DCMAKE_INSTALL_PREFIX= though.

Note: I downloaded and ran the build script from ~/kl/ rather than ~/kdenlive/ - it still created the latter. This is probably unrelated.

build-melt.sh fails due to not being able to pull to movit.

LOG: About to run command: LOG: About to run command: mv eigen-eigen-10219c95fe65 eigen LOG: Done getting or updating source for eigen LOG: About to run command: popd ~/melt/src LOG: Getting or updating source for movit - this could take some time LOG: About to run command: pushd . ~/melt/src ~/melt/src LOG: Cloning git sources for movit LOG: About to run command: git --no-pager clone https://git.sesse.net/movit/ Cloning into 'movit'... fatal: unable to access 'https://git.sesse.net/movit/': Could not resolve host: git.sesse.net ERROR: Unable to git clone source for movit from https://git.sesse.net/movit/ LOG: Process has finished. Reason: FAILURE Some kind of error occured: Unable to git clone source for movit from https://git.sesse.net/movit/

Eventhough the build of FFmpeg does succeed without errors, the way build-melted.sh checks for errors in the logs produces an error:

Line 991: grep -v "X Error" $TMPNAME | grep -i error 2>&1

The latter matches "INSTALL libavutil/error.h"

A patch can be found here: trickkiste@df8ecd8

Is sox an optional dependency for melt?
Something is wrong here: https://github.com/mltframework/mlt-scripts/blob/master/build/build-melt.sh#L1036 . That block is checking not disabled sox then doing mlt_format_optional but then doing DODIE=1

Running Kubuntu 18.04, Kernel 4.15
I have installed all the 265 dev packages that are available, but I keep getting this error:

encoder/CMakeFiles/encoder.dir/build.make:446: recipe for target 'encoder/CMakeFiles/encoder.dir/api.cpp.o' failed
make[2]: *** [encoder/CMakeFiles/encoder.dir/api.cpp.o] Error 1
Reason: FAILURE Some kind of error occured: Unable to build x265

When trying to manually compile x265 with the latest git, I get that very same error.
https://github.com/videolan/x265

Here the output of cmake from when I manually tried to compile x265 from git:
All the dependencies appear to be met.

-- The C compiler identification is GNU 7.3.0
-- The CXX compiler identification is GNU 7.3.0
-- Check for working C compiler: /usr/bin/cc
-- Check for working C compiler: /usr/bin/cc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Detected x86_64 target processor
-- Found NUMA: /usr  
-- Looking for numa_node_of_cpu
-- Looking for numa_node_of_cpu - found
-- libnuma found, building with support for NUMA nodes
-- Looking for include file inttypes.h
-- Looking for include file inttypes.h - found
-- Performing Test CC_HAS_NO_STRICT_OVERFLOW
-- Performing Test CC_HAS_NO_STRICT_OVERFLOW - Success
-- Performing Test CC_HAS_NO_NARROWING
-- Performing Test CC_HAS_NO_NARROWING - Success
-- Performing Test CC_HAS_NO_ARRAY_BOUNDS
-- Performing Test CC_HAS_NO_ARRAY_BOUNDS - Success
-- Performing Test CC_HAS_FAST_MATH
-- Performing Test CC_HAS_FAST_MATH - Success
-- Performing Test CC_HAS_STACK_REALIGN
-- Performing Test CC_HAS_STACK_REALIGN - Success
-- Performing Test CC_HAS_FNO_EXCEPTIONS_FLAG
-- Performing Test CC_HAS_FNO_EXCEPTIONS_FLAG - Success
-- Found nasm: /usr/bin/nasm (found version "2.13.02") 
-- Found Nasm 2.13.02 to build assembly primitives
-- x265 version 0.0
-- The ASM_NASM compiler identification is NASM
-- Found assembler: /usr/bin/nasm
-- Looking for strtok_r
-- Looking for strtok_r - found
-- Looking for include file getopt.h
-- Looking for include file getopt.h - found
-- Configuring done
-- Generating done
-- Build files have been written to: /home/frank/x265-master/source