Generic parking aid about psavancanbridge

[Toniob]

I’ll try first with this project. I’ll keep you posted.

I’ve learn from the project with a web search (I found the repository), and then I read more about it on the 206cc lovers forum.

[morcibacsi]

It looks similar to what I used for testing. First I suggest to check out this repository, if that displays some valid data: https://github.com/morcibacsi/esp32_rmt_chinese_parking_aid To have it working in the bridge you need to connect it to pin 26.
But take note this was only tested outside the car, so it is possible that it won't work (thinking about interference caused by the long wire connected to the board). Anyways, first step is to check with the other repository if it even reads something or not.

BTW where did you find my project?

[Toniob]

I’ve compiled a modified example of your other tool (I used Serial over Bluetooth). If there is 4 values, I print them, if not, I print the number of values. And sadly, I always got 0 of them.

Here is how I plugged everything :

The blue and orange cables are the 12V from the car (not from the box). I convert it to 5V to power the esp32. The red and black cables are the data and GND of the parking aid box. Did I miss something or did something wrong ? I used a really long cable. Should I use the 12V from the box instead of the car ?

[morcibacsi]

Hmm.. maybe it spits out data in a different format. Do you have a logic analyzer? Or an oscilloscope?

[Toniob]

I have a logic analyser. But I’ll have to wait to go to my parents to check the values (because my car is parked on the street). Or maybe you have an idea for me to check at home (without having to take the sensors off of the car).

[morcibacsi]

Maybe I can prepare a sketch to dump the raw data on the serial port, but currently I am not at home, so it might take a few days.