pandoc-crossref is a pandoc filter for numbering figures, equations, tables and cross-references to them.
Input file (like demo.md) can be converted into html, latex, pdf, md or other formats.
Optionally, you can use cleveref for latex/pdf output, e.g. cleveref pdf, cleveref latex, and listings package, e.g. listings pdf, listings latex
You can also enable per-chapter numbering (as with --chapters
for latex output). You need to specify -M chapters
for non-latex/pdf output however. Examples: html, markdown, latex, pdf.
Tested with pandoc 1.13.2 and 1.14.
This work is inspired by pandoc-fignos and pandoc-eqnos by @tomduck.
This package tries to use latex labels and references if output type is LaTeX. It also tries to supplement rudimentary LaTeX configuration that should mimic metadata configuration by setting header-includes
variable.
Syntax is loosely based on discussion in jgm/pandoc#813
![Caption](file.ext){#fig:label}
To label an (implicit) figure, append {#fig:label}
(with label
being something unique to reference this figure by) immediately after image definition.
This only works on implicit figures, i.e. an image occurring by itself in a paragraph (which will be rendered as a figure with caption by pandoc)
Image block and label can be separated by one or more spaces.
$$ math $$ {#eq:label}
To label a display equation, append {#eq:label}
(with label
being something unique to reference this equation by) immediately after math block.
This only works if display math and label specification are in a paragraph of its own.
Math block and label can be separated by one or more spaces.
a b c
--- --- ---
1 2 3
4 5 6
: Caption {#tbl:label}
To label a table, append {#tbl:label}
at the end of table caption (with label
being something unique to reference this table by). Caption and label must be separated by at least one space.
You can also reference sections of any level. Section labels use native pandoc syntax, but must start with "sec:", e.g.
# Section {#sec:section}
You can also use autoSectionLabels
variable to automatically prepend all section labels (automatically generated with pandoc included) with "sec:". Bear in mind that references can't contain periods, commas etc, so some auto-generated labels will still be unusable.
WARNING: With LaTeX output, you have to invoke pandoc with --number-sections
, otherwise section labels won't work. It's also advised with other output formats, since with no numbers in section titles, it would be hard to navigate anyway.
Not currently supported with LaTeX output
If you want to reference some section by a pre-defined label instead of by number, you can specify section attribute label
, like this:
# Section {label="Custom Label"}
This label will be used instead of section number in chapters
output and when referencing section directly (with @sec:section
).
Note that with chapters
output with depth>1, only given section will be referenced by custom label, e.g. with
# Chapter 1.
## Section with custom label {#sec:scl label="SCL"}
![](figure.png){#fig:figure}
@sec:scl
will translate into sec. 1.SCL
, and @fig:figure
into fig. 1.SCL.1
There are a couple options to add code block labels. Those work only if code block id starts with lst:
, e.g. {#lst:label}
caption
attribute will be treated as code block caption. If code block has both id and caption
attributes, it will be treated as numbered code block.
```{#lst:code .haskell caption="Listing caption"} main :: IO () main = putStrLn "Hello World!" ```
Enabled with codeBlockCaptions
metadata option. If code block is immediately
adjacent to paragraph, starting with Listing:
or :
, said paragraph will be
treated as code block caption.
Listing: Listing caption ```{#lst:code .haskell} main :: IO () main = putStrLn "Hello World!" ```
or
```{#lst:code .haskell} main :: IO () main = putStrLn "Hello World!" ``` : Listing caption
Wrapping code block without label in a div with id lst:...
and class, starting with listing
, and adding paragraph before code block, but inside div, will treat said paragraph as code block caption.
<div id="lst:code" class="listing"> Listing caption ```{.haskell} main :: IO () main = putStrLn "Hello World!" ``` </div>
[@fig:label1;@fig:label2;...] or [@eq:label1;@eq:label2;...] or [@tbl:label1;@tbl:label2;...] or @fig:label or @eq:label or @tbl:label
Reference syntax heavily relies on citation syntax. Basic reference is created by writing @
, then basically desired label with prefix. It is also possible to reference a group of objects, by putting them into brackets with ;
as separator. Similar objects will be grouped in order of them appearing in citation brackets, and sequential reference numbers will be shortened, e.g. 1,2,3
will be shortened to 1-3
.
You can capitalize first reference character to get capitalized prefix, e.g. [@Fig:label1]
will produce Fig. ...
by default. Capitalized prefixes are derived automatically by capitalizing first letter of every word in non-capitalized prefix, unless overriden with metadata settings. See Customization for more information.
It's possible to use raw latex commands \listoffigures
, \listoftables
and listoflistings
, which will produce ordered list of figure/table/listings titles, in order of appearance in document.
\listoflistings
depends on other options, and is defined in preamble, so it will work reliably only with standalone/pdf output.
Assuming you already installed Haskell platform, you can install pandoc-crossref with cabal:
cabal update
cabal install pandoc-crossref
Run pandoc with --filter
option, passing path to pandoc-crossref executable, or simply pandoc-crossref
, if it's in PATH:
pandoc --filter pandoc-crossref
If you installed with cabal, it's most likely located in $HOME/.cabal/bin
on *NIX systems, or in %AppData%\cabal\bin
on Windows.
There are several parameters that can be set via YAML metadata (either by passing -M
to pandoc
, or by setting it in source markdown)
Following variables are supported:
cref
: if True, latex export will use\cref
from cleveref package. Only relevant for LaTeX output.\usepackage{cleveref}
will be automatically added toheader-includes
.chapters
: if True, number elements aschapter.item
, and restartitem
on each first-level heading (as--chapters
for latex/pdf output)chaptersDepth
, default1
: header level to treat as "chapter". IfchaptersDepth>1
, then items will be prefixed with several numbers, corresponding to header numbers, e.g.fig. 1.4.3
.listings
: if True, generate code blocks forlistings
package. Only relevant for LaTeX output.\usepackage{listings}
will be automatically added toheader-includes
. You need to specify--listings
option as well.codeBlockCaptions
: if True, parse table-style code block captions.figureTitle
, defaultFigure
: Word(s) to prepend to figure titles, e.g.Figure 1: Description
tableTitle
, defaultTable
: Word(s) to prepend to table titles, e.g.Table 1: Description
listingTitle
, defaultListing
: Word(s) to prepend to listing titles, e.g.Listing 1: Description
titleDelimiter
, default:
: What to put between object number and caption text.figPrefix
, defaultfig.
,figs.
: Prefix for references to figures, e.g.figs. 1-3
eqnPrefix
, defaulteq.
,eqns.
: Prefix for references to equations, e.g.eqns. 3,4
tblPrefix
, defaulttbl.
,tbls.
: Prefix for references to tables, e.g.tbl. 2
lstPrefix
, defaultlst.
,lsts.
: Prefix for references to lists, e.g.lsts. 2,5
secPrefix
, defaultsec.
,secs.
: Prefix for references to sections, e.g.secs. 2,5
autoSectionLabels
, defaultfalse
: Automatically prefix all section labels withsec:
. Note that this messes with pandoc's automatic header references.chapDelim
, default.
: Delimiter between chapter number and item number.rangeDelim
, default-
: Delimiter between reference ranges, e.g.eq. 2-5
lofTitle
, default# List of Figures
: Title for list of figures (lof)lotTitle
, default# List of Tables
: Title for list of tables (lot)lolTitle
, default# List of Listings
: Title for list of listings (lol)figureTemplate
, default\\[figureTitle\\] \\[i\\]\\[titleDelim\\] \\[t\\]
: template for figure captions, see TemplatestableTemplate
, default\\[tableTitle\\] \\[i\\]\\[titleDelim\\] \\[t\\]
: template for table captions, see TemplateslistingTemplate
, default\\[tableTitle\\] \\[i\\]\\[titleDelim\\] \\[t\\]
: template for listing captions, see Templates
figPrefix
, eqnPrefix
, tblPrefix
, lstPrefix
can be YAML arrays. That way, value at index corresponds to total number of references in group, f.ex.
figPrefix:
- "fig."
- "figs."
Will result in all single-value references prefixed with "fig.", and all reference groups of two and more prefixed with "figs.":
[@fig:one] -> fig. 1
[@fig:one; @fig:two] -> figs. 1, 2
[@fig:one; @fig:two; @fig:three] -> figs. 1-3
They can be YAML strings as well. In that case, prefix would be the same regardless of number of references.
They can also be used with first character capitalized, i.e. FigPrefix
, etc. In this case, these settings will override default reference capitailzation settings.
Support for above variables with LaTeX/PDF output is limited. In particular, the following variables are honored:
figureTitle
tableTitle
listingTitle
lofTitle
-- ignores formattinglotTitle
-- ignores formattinglolTitle
-- ignores formatting*Prefix
, upper-/lowercase and single/plural form. Note that with cleveref output, if*Prefix
is array, only first two items are used, and the rest is ignored.
Templates are not supported.
You can add arbitrary LaTeX commands to document header, however, using header-includes
metadata field. Please bear in mind, that pandoc-crossref up to and including 0.1.2.1 requires header-includes
to be YAML array, e.g.
header-includes:
- "\\newcommand{\\pcdoc}{Pandoc-crossref documentation}"
This will be added before any customization applied by pandoc-crossref. For a complete list of what is added to template, consult ModifyMeta.hs.
pandoc-crossref supports advanced caption customization via caption templates. Templates are specified as YAML metadata variables (see Customization), and are parsed as default Pandoc Markdown. Variables are specified with display math syntax, i.e. $$var$$
in a template will be replaced with value of variable var
.
Variables can be specified in YAML metadata block, or from command line (with -M
switch). There are two special variables, that are set internally:
i
-- object number, possibly with chapter number (ifchapter=True
)t
-- object caption, as given in source Markdown
Please note that at the moment, templates are not supported with LaTeX/PDF output.
It is also possible to set variables used by pandoc-crossref with a separate YAML file. If a given variable is not set in metadata, then pandoc-crossref will attempt to read it from file specified by crossrefYaml
metadata variable, or, if not set, from pandoc-crossref.yaml
from current working directory. This allows for reusable configurations. One possible application is ad-hoc internationalization.
For example, consider $HOME/misc/pandoc-crossref-es.yaml
:
figureTitle: "Figura"
tableTitle: "Tabla"
figPrefix: "fig."
eqnPrefix: "ec."
tblPrefix: "tbl."
loftitle: "# Lista de figuras"
lotTitle: "# Lista de tablas"
One could use this with pandoc-crossref as follows:
pandoc -F pandoc-crossref.hs -M "crossrefYaml=$HOME/misc/pandoc-crossref-es.yaml"