[SM-P550] Not booting to stock android. about lk2nd

[TravMurav]

Hi, lk2nd replaces android kernel boot.img so to boot into android you have to install it back via lk2nd (It will flash it with the offset and boot when it can't find any ext2 boot partition like the one postmarketOS provides)

However I think we don't have P variant in the lk2nd dtb configs: In this case the device should be added to lk2nd first so it can recognize it and know how to boot the downstream boot images (edit: we may also require that for mainline images as well later but for now lk2nd doesn't need to know anything so it can boot them fine):

A change similar to this would be needed:
dcbdfee

To know, which file you need to add it to, you should see a line "DTB - <...>" on the lk2nd screen. It shows msm-id and board-id that are present in each dts file.
Usually for Samsung the last number is "revision", we mark those as -rXX

After you add the device node, your lk2nd screen should start showing the model you have selected and usually this is enough for android images to boot.

[stephan-gh]

Given the timing (one day after 0.11.0) I think this could be also caused by the downstream boot regression that should be fixed in 0.12.0 (see #130). So I think it's safe to close this issue. Let us know if you're still having problems.

(The device entry should still be added however to have the proper device name displayed on the fastboot screen...)