nabeelbukhari / aircrackgui-m4 Goto Github PK

What steps will reproduce the problem?

1. Ejecutar el programa, seleccionar la interface y hacer click en Start

What is the expected output? What do you see instead?

Que el programe funcione

What version of the product are you using? On what operating system?

1.0.0 beta2, Uso Linux Mint cinnamon (basado en ubuntu)

Please provide any additional information below.

El error que da es el siguiente: 
aircrack-ng-1.1-M4/airodump-ng: error while loading shared libraries: 
libssl.so.0.9.8: wrong ELF class: ELFCLASS64

Antes directamente me decía que el archivo libssl.so.0.9.8 directamente no 
existía, para solucionarlo copié un acceso directo de ese archivo a la 
carpeta /usr/lib , previamente estaba en /lib/x86_64-linux-gnu

What steps will reproduce the problem?

1. Chop Chop Attack succesfull
2. Arp Forged correctly
3. When format of IP is IPv6, chopchop x 3 is only chopChop x 1, but program 
shows like chopChop x 3 (injection rate multiplied x 3).



It will be fix.

What steps will reproduce the problem?
1. Start monitor mode in my wifi card
2. Select mon0 interface
3. When i click start i get this error

What is the expected output? What do you see instead?
Expected to see the list of wifi networks from airodump instead of this i see 
"Error al intentar enjectar aircrack-ng-1.1-M4/airodump-ng --enc wep mon0"

What version of the product are you using? On what operating system?
I use the aircrackgui-m4 x64 beta 2 version in Ubuntu 12.04 x64.

Please provide any additional information below.
I also try to use the binary into the aircrack-ng-1.1-M4/ folder through 
console.
And the output is...
"bash: ./airodump-ng: No such file or directory"
And there is in directory. And when i run it with sudo i get a new line.

In some distributions macchanger needs some files that are in the system. 
depends of the system, these files are in one place or other place, so, maybe 
macchanger could fail.

The solution is to eliminate macchanger of binutils folder and to detect 
macchanger installed on the system. If macchanger is not installed on the 
system, inform.

SO, FOR THE NEXT VERSION, MACCHANGER WILL NOT BE IN BINUTILS, BUT IN THE 
SYSTEM. 

What steps will reproduce the problem?
1. When push stop button from deauthentication
2. Shows DEAUTHENTICATION msg, when just stop it

Thats is an error.



It will fix.

Well iḿ trying to capture some WEPs since yesterday and everytime the GUI 
shows me the same error message:

mon0 is on channel -1, but the AP uses channel X*

Where X is the channel of the connection

I'm trying to look for someone who had the same problem but I don't find 
anything so please I ask for your help.

This is more a feature request that a bug report:
Do you think in a future release will be able to save the logs and working 
folders (arp_replays, captures...) to the user home directory, like 
/home/user/.aircrackgui-m4 ?

What steps will reproduce the problem?
1. La aplicacion ejecuta, sin embargo al ejecutar start en Airodump me dice que 
no se consigue el archivo. Si ejecuto ese comando directo desde el directorio 
tampoco funciona. Cabe destacar que coloque permisos 777 a todo el directorio 
de aircrackgui-m4.
2. Cree links simbolicos a airodump, aircrack y airplay en la carpeta de tu 
aplicacion hacia las del sistema y el error desaparece, sin embargo ahora me 
dice que no puede abrir los archivos .M4
3. Cuando busco en internet, los usuarios dicen que busque los archivos .M4 en 
la carpeta src de aircrackgui-m4, pero esa carpeta no existe.

What is the expected output? What do you see instead?
Donde deberian estar esos archivos .M4?


What version of the product are you using? On what operating system?
AircrackGUI-M4-Ultimate-1.0.0-Beta2-64bits
Kali Linux


Please provide any additional information below.
Que puede ser?

Muchas gracias.

What steps will reproduce the problem?
1.cd program folder in terminal 
2.sudo sh file 
3.

What is the expected output? 
program should start.

What do you see instead?

[sudo] password for bea: 
***********************************************************
This program requires:
libqt4-core version 4.8.0
libqt4-gui version 4.8.0
***********************************************************
***********************************************************
Exporting LD_LIBRARY_PATH (To include actual folder)...
***********************************************************
***********************************************************
Executing Aircrack M4!
***********************************************************
./aircrack-GUI: symbol lookup error: ./aircrack-GUI: undefined symbol: 
_ZN9QListData11detach_growEPii
***********************************************************
PULSE ENTER TO EXIT
***********************************************************

What version of the product are you using?
v1.0.0 beta1 32bit

On what operating system?
nodezero (ubuntu 10.04)

Please provide any additional information below.
none dependancy are all there so dont know what cause the problem.

What steps will reproduce the problem?
The channel of mon0 is incorrect when I tried to Fake Auth, Fake Deauth, 
Fragmentation, ChopChop, etc.


What is the expected output? What do you see instead?


What version of the product are you using? On what operating system?
Wlan1 is RTL8187, running on ubuntu 12.04

Please provide any additional information below.

No source MAC (-h) specified. Using the device MAC (00:11:22:33:44:55)
01:33:18  Waiting for beacon frame (BSSID: F4:6D:04:xx:xx:xx) on channel -1
01:33:18  mon0 is on channel -1, but the AP uses channel 6

The following is copied from mainlong:

[15/05 01:38:00] Airodump: Trying to launch Deauth attack
[15/05 01:38:00] MainWindow: Launching Deauth attack
[15/05 01:38:00] Fake Deauth: Starting attack with BSSID=F4:6D:04:xx:xx:xx, 
MAC=STOPPED
[15/05 01:38:00] Fake Deauth: Status changes to DEAUTHENTICATING
[15/05 01:38:01] Fake Deauth: Stopping
[15/05 01:38:01] Fake Deauth: Status changes to DEAUTHENTICATED
[15/05 01:38:01] Fake Deauth: Status changes to STOPPED

What steps will reproduce the problem?
1. ERROR! Lib lib/libQtCore.so.4 not found
* ¡ERROR! Lib lib/libQtGui.so.4 not found

2. the librari are instaled
3.  IM usin Bt whit 2.6.39 kernel
Whats is the solution, sorry my english is bad

What steps will reproduce the problem?
beta2 does not seem to monitor wpa connection i get only result for wep

What is the expected output? What do you see instead?


What version of the product are you using? On what operating system?

beta2 on ubuntu 12.04
Please provide any additional information below.
wifi nic intel5100

The only way I can do any kind of wireless attacks seems to be when I use 
wpa_supplicant... is there any way we can get this feature in?

basically need to create a file "wpa_supplicant.conf" containing:

network={
        ssid="$essid"
        key_mgmt=NONE
        bssid=$bssid
        wep_key0="fakekey"
}

then run "sudo wpa_supplicant -c<path to wpasupplicant.conf> -Dwext -i<wlan0>

this will do a kind of fake auth.

A mi esque el ingles "asi asi"
¿para cuando estara en español?

What steps will reproduce the problem?
1. It doesn't work correctly because of the negative one (-1).
2. It Shows the any channel as 108 or -1
3.

What is the expected output? What do you see instead?
I expect to see the AP channel not 108 or -1.

What version of the product are you using? On what operating system?

I am using AircrackGUI-M4-Ultimate-1.0.0-Beta2-64bits, Elementary OS 0.3 Freya 
beta it's built on Ubuntu 14.04


Please provide any additional information below.

When I try to collect packets from WEP encryption it doesn't start because the 
negative one (-1) channel when I run Aircrack-ng from the terminal it has the 
same problem too but when I write --ignore-negative-one it works fine so I 
think you need to fix this problem in your GUI it was working fine on the older 
kernel before the latest update I made.

Hi, please upload your patched aircrack-ng source or maybe only the patch.

What steps will reproduce the problem?
1. Ejecutar ./aircrack-GUI
2.
3.

What is the expected output? What do you see instead?
Esto significa qué debería pasar, no? Pues lo que debería pasar es que el 
programa empezase a funcionar, pero nada, se carga la interfaz del programa 
pero no se puede hacer nada porque nada más pulsar sobre ./aircrack-GUI sale 
un cuadrito diciendo que "Error trying to load interfaces", y claro, sin 
interfaces de red pues todo aparece con un fondo rojísimo diuciendo "STOPPED".

What version of the product are you using? On what operating system?
Udo la versión 0.7.0 y estoy en Gentoo 64 bits, kernel 3.0.6, KDE 4.7.3 y QT 
4.7.4

Please provide any additional information below.
Si ejecuto aircrack-GUI-Start.sh se queja de que no tenga QT 4.7.3, luego 
protesta porque no tenga libpng12.so.0 (o porque no la encuentra, no sé) y me 
dice que pulse intro para salir. supongo que todo esto son mensajes absurdos 
puesto que aircrack-GUI lanza el programa perfectamente, cosa que si no 
funcionase QT 4.7.4 y esa versión de libpng fuese imprescindible sería 
imposible que el programa anduvieses, no?

Saludos

What steps will reproduce the problem?
1. when i try to start monitoring
2.
3.


What is the expected output? What do you see instead?
aircrack-ng-1.1-M4/airodump-ng: error while loading shared libraries 
libssl.so.0.9.8

What version of the product are you using? On what operating 
system?aircrack-ng-1.1-M4 beta 2 x64 on  Ubuntu 12.04 LTS (GNU/Linux 
3.2.0-26-generic x86_64)


Please provide any additional information below.

i have chek ld_path and symlink , tail log cannot provide much details. libssl 
0.9.8 and 1.0.0 already installed , i have a already working aircrack suit 
installed.

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?
Cuando inicio el programa y selecciono el interface,lo pongo en modo monitor, 
voy a airodump y le doy a START, me sale un error que dice:
error while loading shared libraries libssl.so.0.9.8: can not open shared 
object file.No such file or directory.

What version of the product are you using? On what operating system?

Linux 0.7.0 Final WEP Edition
Please provide any additional information below.

No consigo que arranque, ni siquiera puedo ver los puntos de acceso

What steps will reproduce the problem?
1. Abro Programa
2. Mando ataques
3. fallan muchos

Hola

Llevo usando este software bastante tiempo.

Pero tras la actualizacion al ultimo kernel de ubuntu, me da un error en 
ciertas partes del programa: "Fragmentation","ARP Replay", "chop chop". En 
definitiva, el programa anda, pero fatal, cosa que antes no pasaba.

El error es: "ioctl(RTC_IRQP_SET)failed:invalid argument".

Llevo buscando y estudiando el error bastantes horas. Parece que el kernel 3.X 
de ubuntu ha quitado el RTC(Reloj de hardware del sistema), y hay bastantes 
aplicaciones que lo usan.

Como soluciones he intentado:
-Instalar un kernel anterior. Al cual entro, pero no me deja parchear para el 
problema del canal, me da un error distinto al hacer make, etc.

-Buscar RTC para este kernel. A esto le he dedicado gran cantidad de horas, he 
buscado, he intentado de todo, pero no consigo nada.


Alguna idea para reparar me error?, cualquier solucion es valida, ya que en el 
90% uso linux para este programa

Espero respuesta

What steps will reproduce the problem?
1. Started Airmon   : OK
2. Started Airodump : OK
3. Stop Airodump    : FAIL, GUI stops and system logs me out. 

What is the expected output? What do you see instead?

-Airodump should stop while program should continue normal. 

What version of the product are you using? On what operating system?

-1.0.0 Beta 2 (0.7 does the same)
-Ubuntu 14.04
-Running on a notebook (high-end)

Please provide any additional information below.

-I tried different versions, all do the same. All sources appear to be 
installed correctly.
-Besides my internal card i tried an external USB adapter as well, without 
succes.

Hi,
I'm running the 1.0.0 beta version on kubuntu 12.04
As soon as airodump is started, the main airodump section does not show up 
output properly (sometimes it would show just wep encrypted networks), while 
the section with sations-APs associations loads normally.

I'm sending you the 2 screenshots: the first one captured from your program 
showing the problem about main airodump section, the second is just some 
warning message that maybe can be useful for you.

Regards,
Ste

What steps will reproduce the problem?
1. Use a high screen resolution
2. Open the aircrackgui-m4 1.0.0 Beta 2
3. Take a look to any font displayed in the GUI

There should be an option to change the font size used by the GUI


I'm using the Aircrack GUI M4 1.0.0 Beta 2 on Ubuntu Lucid (Ubuntu 10.04) with 
LXDE


It would be great to have an additional tab in the "General options" menu in 
order to be able to change the font size.

What steps will reproduce the problem?
1. start the execution of the GUI version
2.
3.

What is the expected output? What do you see instead?


What version of the product are you using? On what operating system?
version 1.0.0 BETA 2

Please provide any additional information below.
Creating symlink to my kali linux libssl.so library does not work
ln -s /usr/lib/x86_64-linux-gnu/libssl.so.1.0.0 
/usr/lib/x86_64-linux-gnulibssl.so.0.9.8

Any help?

Regards

No info about compiling from source are availables, and the makefile is missing.
Please provide infos for compile it from source.

Thanks

Arranco la gui. En la parte superior de la ppantalla en la pestaña Airodump no 
se muestran las redes escaneadas. Power aparece a 0% en la de las estaciones 
detectadas.

Estoy usando Aircrack 1.1 y la GUI 0.7.0 final WEP edition 64 bits.

What steps will reproduce the problem?
1. start scanning for networks
2.
3.

What is the expected output? What do you see instead?
find the networks, but i get "Error trying to open .M4 file"

What version of the product are you using? On what operating system?
tried both 0.7 and r54 on archlinux

Please provide any additional information below.

Este programa no tiene instalacion para no tener que iniciarlo desde consola?
Al tratarse de una gui para un programa de linea de comandos se supone que no 
haria falta el terminal.
Se solucionara esto?
seria posible bajar el codigo fuente para mirar de hechar una mano?

any chance you could add support for reaver-wps? 

Please upload the icons to svn too.

What steps will reproduce the problem?
1. PATH PROGRAM has white spaces


Then in some cases capture files are not created.
SOLUTION: REMOVE WHITE SPACES IN PATH.


In future versions, default path won't have white spaces.

[thx to [email protected]]

What steps will reproduce the problem?
1. authenticated already then cant start attack , select yes to authenticate 
and still cant start any attack, asked to authenticate.
2. deauthenticate permenently says deauthenticated and the start,stop buttons 
are there.
3. can you add an option to start attack/continue even if not authenticated, so 
the user is not blocked from starting an attack.

i've tried it with backtrack 4 and slitaz aircrack-ng , and the bugs listed 
appear on certain ap's. 

it works very well with slitaz aircrack-ng, but i think compatibility could be 
improved slightly.

1. (gracias a naddia wifiway). una opcion que solo lleva el programa beini, que 
consiste en poder elegir una autentificacion forzada cuando la normal no acaba 
de tirar.

What steps will reproduce the problem?
1. set wlan0 to monitor mode with airmon-ng
2.  start aircrackgui-m4
3.  fails to load interfaces

What is the expected output? What do you see instead?
To see the various network interfaces I have going, when I type "airmon-ng 
start wlan0" it lists wlan0 as well as mon0 and states that monitor mode as 
been activated yet when i start your program it can not find any interfaces 
whatsoever.

What version of the product are you using? On what operating system?
beta2 on Gentoo linux 

Please provide any additional information below.

the stable release doesnt work at all seeing as you depend on libpng12 and 
Gentoo unstable trunk is at libpng15 so i cant even test the older version. Let 
me know what I need to provide to you in order to get some help in getting this 
running. I really like the program you made over all, if it could just pick up 
my cards.......

Hola.

Acabo de bajarme la versión 1.0.0 β1 y no consigo hacerla funcionar; al 
intentar ejecutar Airodump sale un cuadrito de información con el siguiente 
texto:
«aircrack-ng-1.1-M4/airodump-ng: aircrack-ng-1.1-M4/airodump-ng: no se puede 
ejecutar el fichero binario»

Acepto yme sale un segundo cuadro de información diciendo que:
«Are you sure that you have executed airmon-ng in options to put interface 
into monitor mode and select correct interface?
SEE LOG»

Sí, tengo mi inalámbrica en modo monitor y mon0 seleccionado. Por supuesto 
estoy ejecutando el programa como root.

Al ir a la consola a ver qué pasa obtengo el mismo error al intentar ejecutar 
el Airodump que viene en el paquete de aircrackgui-m4:
localhost aircrack-ng-1.1-M4 # ./airodump-ng mon0
bash: ./airodump-ng: no se puede ejecutar el fichero binario

Cuando ejecuto Airodump desde mi instalación de Aircrack normal funciona sin 
problemas. Por último decir que la versión 0.7 funciona bien.

¿Alguna idea?

Saludos y enhorabuena por el excelente interfaz (problemillas com oeste aparte, 
claro, jeje).

can't  fix  this...plz  help  i  did  install  libssl  and  i  have  greate  a  
sympolic  link   ...the  error  is stil  there  Error trying to open .M4 file

What steps will reproduce the problem?
1. I downloaded this but how do i install this on backtrack?
2.
3.

What is the expected output? What do you see instead?


What version of the product are you using? On what operating system?
Backtrack 5

Please provide any additional information below.

declare attackM4() in airodump.h

buenas noches,
disculpe tengo un problema al intentar ejecutar la aplicacion dando el 
siguiente error error trying to open .M4 file
te agradeceria si me puedes ayudar a solucionarlo.
gracias...

#1 There are no make files, configure scripts, or readme's of any kind
#2 SVN on code.google.com? How is this possible? While SVN rocks compared to 
CVS, It has been obsoleted by Git. I'm amazed Google Code lets anyone downgrade 
to SVN.

It looks like the source is bogus. The "compiled" version wants an obsolete 
version on OpenSSL so it doesn't work.