A lightweight configurable overlay volume/backlight/progress/anything bar for the X Window System. Each time a new value is read on the standard input, it is displayed as a tv-like bar over other windows. It then vanishes after a configurable amount of time. A value followed by a bang '!' is displayed using an alternate color to account for special states (e.g. muted audio). There is also support for overflows (when the value exceeds the maximum).
xob depends on libx11 and libconfig.
make
make install
There is also an Archlinux package on the AUR.
xob [-m maximum] [-t timeout] [-c configfile] [-s style]
- maximum Maximum value/number of steps in the bar (default: 100). 0 is always the minimum.
- timeout Time in seconds the bar stays on-screen after an update (default: 1). 0 means the bar is never hidden.
- configfile Path to a file that specifies styles (appearances).
- style Chosen style from the configuration (default: the style named "default").
Lauch xob in a terminal, enter a value (positive integer), press return. Suffix a value with '!' for alternate color. Use a value above the maximum (default: 100) to see how overflows are displayed.
You may manage a bar for audio volume, backlight intensity, or whatever, using a named pipe. Create a named pipe, e.g. /tmp/xobpipe, on your filesystem using
mkfifo /tmp/xobpipe
Connect the named pipe to the standard input of an xob instance.
tail -f /tmp/xobpipe | xob
Set up your environment so that after updating audio volume, backlight intensity, or whatever, to a new value like 43, it writes that value into the pipe:
echo 43 > /tmp/xobpipe
Adapt this use-case to your workflow (scripts, callbacks, or keybindings handled the window manager).
If you are using pulseaudio, save the following Python script (depends on the pulsectl python library) and simply pipe it in xob! ./pulse-volume-watcher.py | xob
#!/usr/bin/env python3
from pulsectl import Pulse, PulseLoopStop
import sys
# Adapt to your use-case
sink_id = 0
with Pulse() as pulse:
def callback(ev):
if ev.index == sink_id:
raise PulseLoopStop
try:
pulse.event_mask_set('sink')
pulse.event_callback_set(callback)
last_value = round(pulse.sink_list()[sink_id].volume.value_flat * 100)
last_mute = pulse.sink_list()[sink_id].mute == 1
while True:
pulse.event_listen()
value = round(pulse.sink_list()[sink_id].volume.value_flat * 100)
mute = pulse.sink_list()[sink_id].mute == 1
if value != last_value or mute != last_mute:
print(value, end='')
if mute:
print('!')
else:
print('')
last_value = value
last_mute = mute
sys.stdout.flush()
except:
passThis script listens to volume and mute events. No matter how the volume changes (keybindings, pulse control panel, headphones plugged-in), it will instantly show up the volume bar. You might need to adapt the sink_id.
When starting, xob looks for the configuration file in the following order:
- The path specified as the -c argument.
$XDG_CONFIG_HOME$/xob/styles.cfg(if$XDG_CONFIG_HOME$is set)~/.config/xob/styles.cfg/etc/xob/styles.cfg
Consult the man page for detailed information about the configuration file and the available options. The following styles.cfg defines a single style called "default" that showcases all the possible options set to the default values. The configration file may contain additional styles to choose among using the -s argument.
default = {
x = {relative = 0.0; offset = 0;};
y = {relative = 0.9; offset = 0;};
length = {relative = 0.2; offset = 0;};
thickness = 24;
outline = 3;
border = 4;
padding = 3;
overflow = "proportional";
color = {
normal = {
fg = "#ffffff";
bg = "#000000";
border = "#ffffff";
};
alt = {
fg = "#555555";
bg = "#000000";
border = "#555555";
};
overflow = {
fg = "#ff0000";
bg = "#000000";
border = "#ff0000";
};
altoverflow = {
fg = "#550000";
bg = "#000000";
border = "#550000";
};
};
};
The horizontal x and vertical y position of the bar is determined by a relative position on the screen (0.0 and 1.0 on the edges, 0.5 in the middle) and an offset in pixels from that relative position. Likewise, the length of the bar has a relative component (1.0 full-width, 0.0 collapsed) and an offset in pixels. Here are some examples.
| Illustration | Relative x |
Offset x |
Relative y |
Offset y |
Relative length |
Offset length |
|---|---|---|---|---|---|---|
 |
0.5 | 0 | 0.75 | 0 | 0.3 | 0 |
 |
0.0 | 0 | 0.0 | 0 | 0.3 | 0 |
 |
1.0 | 0 | 0.0 | 0 | 0.3 | 0 |
 |
0.5 | 0 | 0.0 | 0 | 0.3 | 0 |
 |
0.5 | 0 | 1.0 | 0 | 0.3 | 0 |
 |
1.0 | -10 | 1.0 | -10 | 0.3 | 0 |
 |
0.5 | 0 | 0.75 | 0 | 0.5 | 0 |
 |
0.5 | 0 | 0.75 | 0 | 1 | 0 |
 |
0.5 | 0 | 0.75 | 0 | 1 | -20 |
 |
0.0 | +110 | 0.0 | +135 | 0.0 | +126 |
The values for thickness, padding, border, and outline are a number of pixels.
There are three colors: foreground, background, and border. They change depending on the displayed value. Also, there are two ways to display overflows: use the overflow color with no feedback on how much it overflows ("hidden" mode), or use the overflow color on part on the bar only proportionally to how much the value overflows ("proportional" mode).
| Illustration | Display mode | Overflow type |
|---|---|---|
 |
Normal | No overflow (empty) |
 |
Normal | No overflow (quarter-full) |
 |
Alternate (e.g. mute) | No overflow (quarter-full) |
 |
Normal | No overflow (full) |
 |
Normal | Overflow in "hidden" mode |
 |
Normal | Overflow in "proportional" mode |
 |
Alternate | Overflow in "hidden" mode |
 |
Alternate | Overflow in "proportional" mode |
Here is a style that integrates well into default i3wm. Add it to your styles.cfg
i3 = {
padding = 0;
border = 1;
outline = 0;
thickness = 24;
color = {
normal = {
fg = "#285577";
bg = "#222222";
border = "#4c7899";
};
alt = {
fg = "#333333";
bg = "#222222";
border = "#444444";
};
overflow = {
fg = "#900000";
bg = "#222222";
border = "#933333";
};
altoverflow = {
fg = "#900000";
bg = "#222222";
border = "#444444";
};
};
};
"How should I display different sources of information (e.g. volume and brightness)?"
"What happens if several bars are displayed at the same time?"
You can run and distinguish two or more instances of xob with different styles (including color, position, extreme values, etc.). To do so, specify and use different styles from your configuration file (or use different configuration files). To prevent the bars from overlapping, make use of the offset options. For instance you can offset a bar to the top or bottom (see the following example configuration file).
volume = {
thickness = 24;
outline = 1;
border = 2;
padding = 0;
y = {
relative = 0.9;
offset = 0;
};
};
backlight = {
thickness = 24;
outline = 1;
border = 2;
padding = 0;
y = {
relative = 0.9;
# To prevent overlap with the volume bar if displayed at the same time
offset = -30;
};
color = {
normal = {
fg = "#0000ff";
bg = "#000000";
border = "#0000ff";
};
};
};
"Can I integrate xob in a panel of my desktop environment or window manager?"
There is no support for panel integration. You can however use absolute positioning and no timeout (-t 0) to mimic this behaviour in simple situations.
"How to set up xob with multiple monitors?"
xob works well under multihead setups but there is no easy way to configure the position of the bar for now. In a dual monitor setup with the default configuration, the horizontal centering is not local to one of the two monitors. It is global. The bar might be split in two: one part on each screen. You will probably find it easier to fall back to absolute positioning much like the last example in the table in section "Positioning". If you want an xob instance to be centered (horizontally) on the far-right monitor, set x.relative to 1.0 (anchored on the far right) and the x.offset to minus half the width of that screen.
- Multihead-friendly configuration.
- Vertical mode.
- New overflow styles.
- Smooth transitions.
GPL3, see LICENSE.
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent