GithubHelp home page GithubHelp logo

nortti0 / dragonpy Goto Github PK

View Code? Open in Web Editor NEW

This project forked from jedie/dragonpy

0.0 0.0 0.0 10 MB

Emulator for 6809 CPU based system like Dragon 32 / CoCo written in Python...

Home Page: http://archive.worldofdragon.org/phpBB3/viewtopic.php?f=5&t=4308

License: GNU General Public License v3.0

Shell 11.74% Python 85.27% Makefile 0.19% BASIC 2.81%

dragonpy's Introduction

Dragon/CoCO emulator written in Python

DragonPy is a Open source (GPL v3 or later) emulator for the old (1981) homecomputer Dragon 32 and Tandy TRS-80 Color Computer (CoCo)...

The MC6809 project is used to emulate the 6809 CPU.

Test Coverage Status on codecov.io DragonPy @ PyPi Python Versions License GPL

Dragon 32 with CPython 3 under Linux:

screenshot Dragon 32

Tandy TRS-80 Color Computer 2b with CPython 2 under Windows:

screenshot CoCo under Windows

(Note: Python 2 support was removed)

DragonPy is written in Python. It's platform independent and runs with Python and PyPy under Linux/Windows/OSX/... It's tested with Python 3.x, PyPy

DragonPy will not be a second XRoar written in Python. This project is primarily to lean and understand.

Future goals are:

  • Implement a integrated development environment for BASIC programs

A full featured Dragon / CoCo emulator is XRoar.

Current state

The Dragon 32 / 64 and CoCo ROMs works in Text mode. Also the "single board computer" ROMs sbc09, Simple6809 and Multicomp6809 works well.

There is a rudimentary BASIC editor with save/load BASIC programm listings direct into RAM.

Looks like this:

old screenshot BASIC Editor (older version of the editor)

Vectrex

The Vectrex (Wikipedia) is a vector display-based video game console. The Hardware are only the 6809 CPU, a 6522 Versatile Interface Adapter and the AY-3-8912 sound chip.

Current state is completely not usable. The 6522 is only a dummy implementation. It makes only sense to display some trace lines, e.g.:

.../DragonPy$ poetry run DragonPy --verbosity 0 --machine=Vectrex run --trace --max_ops=1

BASIC Editor

Use "BASIC editor / open" in the main menu to open the editor.

You can load/save ASCII .bas files from you local drive or just type a BASIC listing ;) With "inject into DragonPy" you send the current listing from the Editor to the Emulator and with "load from DragonPy" back from emulator to editor. Note: The is currently no "warning" that un-saved content will be "overwritten" and there is no "auto-backup" ;)

The "renumbering" tool can be found in the editor window under "tools"

You can also run the BASIC Editor without the Emulator:

.../DragonPy$ make editor
# or:
.../DragonPy$ poetry run DragonPy editor

A rudimentary BASIC source code highlighting is available and looks like this:

screenshot BASIC Editor

Special feature: The Line number that are used in GOTO, SOGUB etc. are extra marked on the left side.

installation

IMPORTANT: The PyPi package name is DragonPyEmulator and not only "DragonPy"!!!

pip install DragonPyEmulator

from source

~$ git clone https://github.com/jedie/DragonPy.git
~$ cd DragonPy/
~/DragonPy$ ./devshell.py

+ /home/jens/repos/DragonPy/.venv/bin/python /home/jens/repos/DragonPy/.venv/bin/devshell

Developer shell - DragonPy - v0.8.0.rc1

            ********************************************************
            * DragonPy is a Open source (GPL v3 or later) emulator *
            * for the 30 years old homecomputer Dragon 32          *
            * and Tandy TRS-80 Color Computer (CoCo)...            *
            ********************************************************
            * Homepage: https://github.com/jedie/DragonPy          *
            ********************************************************


Documented commands (use 'help -v' for verbose/'help <topic>' for details):

dev-shell commands
==================
fix_code_style      poetry   pytest     tox
list_venv_packages  publish  pyupgrade  update

DragonPy commands
=================
download_roms  editor  gui  log_list  run

Uncategorized
=============
alias  help  history  macro  quit  set  shortcuts


(dragonpy) run

The devshell.py can also used as a CLI, e.g.:

~/DragonPy$ ./devshell.py run
~/DragonPy$ ./devshell.py editor

ROMs

All needed ROM files, will be downloaded automatically.

The files will be downloaded from:

Machine download url
Dragon 32 + 64 http://archive.worldofdragon.org/archive/index.php?dir=Software/Dragon/Dragon%20Data%20Ltd/Dragon%20Firmware/
CoCo 2b http://www.roust-it.dk/coco/roms/
Multicomp http://searle.x10host.com/Multicomp/index.html
Simple6809 http://searle.x10host.com/6809/Simple6809.html

sbc09 and Vectrex ROMs are included.

All ROM files and download will be checked by SHA1 value, before use.

run tests

e.g.:

~/DragonPy$ ./devshell.py pytest

or

~/DragonPy$ ./devshell.py tox

more screenshots

"sbc09" ROM in Tkinter window:

screenshot sbc09

"Simple6809" ROM in Tkinter window:

screenshot simple6809

Dragon Keyboard

The keyboard mapping is stored into dragonpy/Dragon32/keyboard_map.py.

Some notes:

  • "CLEAR" is mapped to "Home" / "Pos 1" key
  • "BREAK" is mapped to "Escape" button
  • "LEFT" is mapped to left cursor key and to normal backspace, too.

A "auto shift" mode is implemented. So normal lowercase letters would be automaticly converted to uppercase letters.

paste clipboard

It is possible to paste the content of the clipboard as user input in the machine. Just copy (Ctrl-C) the follow content:

10 CLS
20 FOR I = 0 TO 255:
30 POKE 1024+(I*2),I
40 NEXT I
50 I$ = INKEY$:IF I$="" THEN 50

Focus the DragonPy window and use Ctrl-V to paste the content.

Looks like:

raw.githubusercontent.com/jedie/jedie.github.io/master/screenshots/DragonPy/20140805_DragonPy_Dragon32_Listing.png

Then just RUN and then it looks like this:

raw.githubusercontent.com/jedie/jedie.github.io/master/screenshots/DragonPy/20140805_DragonPy_Dragon32_CharMap.png

DragonPy schematic

        Main Thread                                     Sub Thread      
       (Tkinter GUI)
    +------------------+                         +---------------------+
    |                  |                         |                     |
    | +-------------+  |  CPU cycles/sec queue   |                     |
    | |            <------------------------------------+6809 CPU      |
    | |             |  |                         |       +     ^       |
    | |     GUI     |  |                         |       |     |       |
    | |             |  | Display RAM write queue |    +--v-----+--+    |
    | |  .--------------------------------------------+   Memory  |    |
    | |  |          |  |                         |    +--+-----^--+    |
    | |  |          |  |                         |       |     |       |
    | |  |          |  |                         | +-----v-----+-----+ |
    | |  |          |  |                         | |    Periphery    | |
    | |  |          |  |     Keyboard queue      | |   MC6883 SAM    | |
    | |  |          +--------------------------------->MC6821 PIA    | |
    | |  |          |  |                         | |                 | |
    | +--+-----^----+  |                         | |                 | |
    |    |     |       |                         | +-----------------+ |
    |    |     |       |                         |                     |
    | +--v-----+----+  |                         |                     |
    | |             |  |                         |                     |
    | |   Display   |  |                         |                     |
    | |             |  |                         |                     |
    | +-------------+  |                         |                     |
    +------------------+                         +---------------------+

performance

The current implementation is not really optimized.

With CPython there is round about 490.000 CPU cycles/sec. in console version. This is half as fast as the real Hardware.

With PyPy round about 6.900.000 - 8.000.000 CPU cycles/sec. In other words with PyPy it's 8 times faster as the real Hardware.

e.g. The Dragon 32 6809 machine with a 14.31818 MHz crystal runs with: 0,895MHz (14,31818Mhz/16=0,895MHz) in other words: 895.000 CPU-cycles/sec.

TODO:

  • implement more Dragon 32 periphery
  • missing 6809 unittests after coverage run:
    • MUL
    • BVS

PyDragon32

Some Python/BASIC tools/scripts around Dragon32/64 / CoCo homecomputer.

All script are copyleft 2013-2020 by Jens Diemer and license unter GNU GPL v3 or above, see LICENSE for more details.

Python scripts:

BASIC programms:

Input/Output Tests

/BASIC/InputOutput/keyboard.bas Display memory Locations $0152 - $0159 (Keyboard matrix state table)

Example screenshow with the "Y" key is pressed down. You see that this is saved in $0153:

KeyBoard Screenshot 01

Example with "U" is hold down:

KeyBoard Screenshot 02

Links

Some links:

Source codes:

Dragon 32 resources:

Credits

Some code based on:

ApplePy

An Apple ][ emulator in Python

XRoar

A really cool Dragon / CoCo emulator

included Python modules:

python-pager

Page output and find dimensions of console.

srecutils.py

Motorola S-Record utilities

requirements

dragonlib

Dragon/CoCO Python Library

MC6809

Implementation of the MC6809 CPU in Python

pygments

generic syntax highlighter

History

Links:

| Forum | http://forum.pylucid.org/ | | IRC | #pylucid on freenode.net | | Jabber | [email protected] | | PyPi | pypi.org/project/DragonPyEmulator/ | | Github | github.com/jedie/DragonPy |

donation

dragonpy's People

Contributors

jedie avatar jtauber avatar ghewgill avatar allgood avatar

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google ❤️ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.