nvidia / edk2-nvidia Goto Github PK
View Code? Open in Web Editor NEWNVIDIA EDK2 platform support
License: Other
NVIDIA EDK2 platform support
License: Other
Hi, now when i switch branch main to r35.3.1-updates, it compiled failed
ERROR - Invalid file path: ('DynamicTablesPkg/Library/Acpi/Arm/AcpiSlitLibArm/AcpiSlitLibArm.inf',)
ERROR - Build.py #000 from /home/ultwcz/work/prj/nx/nvidia-uefi-test/edk2-nvidia/Platform/NVIDIA/Jetson/Jetson.dsc(941): File/directory not found in workspace
What should i do?
Thank you.
Linux does not work with the GICR region described in ACPI.
The logic in board eeprom handling does not work correctly for customer part numbers, as it did with previous implementations.
While working on this pull request:
I discovered what appears to be a bug in the logic that is attempting to find a match to either the compatibility or full TnSpec
. I think the simple fix is to add a break
here:
The bug was exposed due to meta-tegra
having additional bup specs that differed from the L4T 35.3.1 release (which was resolved in the PR). I was able to recreate it using the L4T release by simply adding this spec:
'boardid=3668;fab=200;boardsku=0001;boardrev=;fuselevel_s=1;chiprev=2;board=jetson-xavier-nx-devkit-emmc;rootdev=mmcblk0p1'
to the jetson-xavier-nx-devkit-emmc
board of the t19x_spec
in jetson_board_spec.cfg
and then rebuilding the capsule per here. With the additional spec present the code will fail to break out of the loop and will match on the next entry, but since Found
is now TRUE
it will fall into the else clause that returns EFI_UNSUPPORTED
.
Hello,
I've been updating our xavier platform to use the 35.1 using an AGX Xavier devkit and the new uefi bootloader. We are running a yocto meta-tegra kirkstone image, which by default does not come with a recovery partition. The head of kirkstone on meta-tegra right now also does not run nvbootctrl verify
on boot and I ran into the following issue:
Once the retry count for slot A reached 0 the platform will no longer boot. Since there is no recovery partition it drops to the UEFI Shell. There does not appear to be any way from UEFI shell to reset the retry count, nor to force the platform to boot from slot A anyway, nor to place the device in forced-recovery mode to allow flashing over USB.
The only way I am aware of to get out of this state is to have someone physically present place the device into forced recovery mode, after which USB-C flashing works fine. This is very inconvenient for remote developers though.
Shell> setvar RootfsInfo -guid 781E084C-A330-417C-B678-38E696380CB9 -bs -rt -nv
781E084C-A330-417C-B678-38E696380CB9 - RootfsInfo - 0004 Bytes
0C C3 00 00
Shell> setvar RootfsInfo -guid 781E084C-A330-417C-B678-38E696380CB9 -bs -rt -nv
=0x0030C30C
Shell> setvar RootfsInfo -guid 781E084C-A330-417C-B678-38E696380CB9 -bs -rt -nv
781E084C-A330-417C-B678-38E696380CB9 - RootfsInfo - 0004 Bytes
0C C3 30 00
Shell> mm 0x0C39041C -w 4 -n
MEM 0x000000000C39041C : 0x000CFACE
Shell> mm 0x0C39041C -w 4 -n =0x003CFACE
MEM 0x000000000C39041C : 0x003CFACE
Shell> mm 0x0C39041C -w 4 -n
MEM 0x000000000C39041C : 0x003CFACE
neither reset -c
nor reset -w
following either of the above changes had any effect.
Attempting to boot always results in
Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00)
Press ESCAPE for boot options ** WARNING: Test Key is used. **
......
L4TLauncher: Attempting Recovery Boot
Header not seen at either offset 0 or offset 0x1000
Failed to boot recovery:0 partition
...
Press ESC in 1 seconds to skip startup.nsh or any other key to continue.
Shell>
Based on my understanding of nvidia's documentation, these are what the reboot logic should be basing the decision to not boot to slot A on.
based on how "forced-recovery" reboots are handled by drivers/soc/tegra/pmc.c
I tried to read 0xc362000
with the intention of setting the PCM_SCRATCH0_MODE_RCM
bit, but this resulted in an exception and reset of the bootloader:
Shell> mm 0xC362000 -w 4 -n
MEM
Synchronous Exception at 0x0000000857C88874
Synchronous Exception at 0x0000000857C88874
ASSERT [ArmCpuDxe] /dvs/git/dirty/git-master_linux/out/nvidia/bootloader/uefi/Jetson_RELEASE/edk2/ArmPkg/Library/DefaultExceptionHandlerLib/AArch64/DefaultExceptionHandler.c(333): ((BOOLEAN)(0==1))
Resetting the system in 5 seconds.
I've stumbled upon multiple discussions about integration of systemd-boot in OE for Tegra (https://github.com/OE4T/) and currently trying to bring up a PoC setup, so we can replace syslinux.cfg
and have a generic EFI boot loader mechanism supporting UEFI secure boot, UKIs and so on.
IIUC for now the only supported boot sequence is EDK2 -> L4TLauncher -> systemd-boot(or grub)
, as we have to keep L4TLauncher, because it handles Tegra-specific (so-called "boot chains") A/B redundancy implementation.
I was wondering if it's possible to get rid of L4TLauncher
completely, and have systemd-boot
as default boot file stored as EFI/BOOT/BOOTAA64.efi
. BootChainDxe
driver instead of setting EFI variables BootChainFwCurrent
/BootChainOsCurrent
can additionally "flip" boot entries (considering we have entries like default-slot.conf
and fallback-slot.conf
) directly in ESP partition. I'm not sure if it's a good idea, but I haven't found any restrictions in UEFI PI spec
Hi,
We are working on Nvidia Orin platform.
We observed the a longer boot time and need to optimize it.
Please show us how to disable BootLogo,
UEFI branch: R35.4.1
Regards
On Xavier NX SD platforms where some _b FW partitions are on an SD device, FMP capsule update will fail with write protect errors when updating boot chain B FW, E.g.
Overwriting active adsp-fw partition not allowed
Error writing adsp-fw, Offset=0: Write Protected
Failed to write image=adsp-fw: Write Protected
This is caused by the FwPartitionBlockIoDxe driver excluding SD partitions based on device path which makes those _b partitions unavailable during the capsule update.
When switching the rootfs, OS still thinks the switch has not happened despite of it actually having happened.
Hello, two questions here
What is edk2-nvidia? Is it a version of nvidia's UEFI for Jetson?
How do I change the Jetson's UEFI variables and settings (I'm using a Jetson AGX Orin)? How do I use the information on this VariableList page?
I think my questions may help others too.
Thank you
Hi, the boot time of UEFI firmware costs a lot of time. I have changed PcdPlatformBootTimeOut
from 5 to 0, but it still took about 16 seconds.
I noticed a large gap before booting the kernel in the log, so I wanted to ask if there is any way to shorten the startup time.
Thank you.
USB driver support did not make the rel-34 release. The attached pull requests add support for this feature
Hi,
I am using leetop agx xavier which installed 250GB SSD, Samsung SSD 980 series. but, it is stuck and do not disappeared booting logo end of progress bar after I installed 2TB SSD the same brand. After some seconds, it try to reboot and repeat over and again.
I could only see message from UEFI.
Jetson UEFI firmware (version 2.1-32413640 built on 2023-01-24T23:12:27+00:00)
ESC to enter Setup.
F11 to enter Boot Manager Menu.
Enter to continue boot.
** WARNING: Test Key is used. **
......L4TLauncher: Attempting Recovery Boot
EFI stub: Booting Linux Kernel...
EFI stub: Using DTB from configuration table
EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path
EFI stub: Exiting boot services and installing virtual address map...
Is there any way to debug this issue?
BR,
Mark
I was looking through this source code for a way to disable OP-TEE but wasn't able to find one. Is there a way I can disable OP-TEE so that no physical address range is reserved for OP-TEE? If this isn't possible, is there a way to find the physical address range that has been reserved for OP-TEE?
Hello
When I connect jetson to portable monitor, I can't see the logo I replaced , because resolution is different than 480 or 720. (at this case 750x500) Is there anyway to overwrite assets with different resolutions?
When using a DVI to HDMI converter may fault and go into a reboot loop. VGA to HDMI and HDMI to HDMI work.
Hi,
When following steps https://github.com/NVIDIA/edk2-nvidia/wiki/Build-with-docker
I'm seeing permission denied when giving
$ edk2_docker edkrepo clone nvidia-uefi NVIDIA-Platforms main
Syncing the global manifest repository: /home/fadhelh/.edkrepo/edk2-edkrepo-manifest-main
Syncing the global manifest repository: /home/fadhelh/.edkrepo/nvidia
Error: [Errno 13] Permission denied: '/home/fadhelh/project/octo_v1/uefi_docker/build/nvidia-uefi
When tried with
$sudo edk2_docker edkrepo clone nvidia-uefi NVIDIA-Platforms main
sudo: edk2_docker: command not found
I could even see hello when giving
edk2_docker echo hello
Please guide.
Regards
Jetson Linux 34.1 suffers from an issue where booting Orin with a 4K display attached results in a framebuffer overrun and a boot failure. This has been tracked as known bootloader issue 3581719.
Pull request #3 corrects the framebuffer size computation, fixing this issue.
When a device is attached to the /dev/ttyTHS0 uart port, if it streams data it interrupts the boot process. This behavior isn't expected, as it is the only portion of the boot process which outputs or reads from this serial port.
[2023-10-24 16:38:22] Invalid EFI_I2C_DEVICE reported by I2c Enumerate protocol.
[2023-10-24 16:38:22] Invalid EFI_I2C_DEVICE reported by I2c Enumerate protocol.
[2023-10-24 16:38:22] Invalid EFI_I2C_DEVICE reported by I2c Enumerate protocol.
[2023-10-24 16:38:22] Invalid EFI_I2C_DEVICE reported by I2c Enumerate protocol.
[2023-10-24 16:38:22] Invalid EFI_I2C_DEVICE reported by I2c Enumerate protocol.
[2023-10-24 16:38:23] Installed Fat filesystem on 8221EE398
[2023-10-24 16:38:23] [ext4] Needs journal recovery, mounting read-only
[2023-10-24 16:38:25] TegraI2cStartRequest: Timeout waiting for Packet Complete
[2023-10-24 16:38:25] TegraI2cStartRequest: Timeout waiting for Packet Complete
[2023-10-24 16:38:25] TegraI2cStartRequest: Timeout waiting for Packet Complete
[2023-10-24 16:38:25] TegraI2cStartRequest: Timeout waiting for Packet Complete
[2023-10-24 16:38:26] TegraI2cStartRequest: Timeout waiting for Packet Complete
[2023-10-24 16:38:26] PrintBootOrder: Current BootOrder:
[2023-10-24 16:38:26] PrintBootOrder: BootOrder[0] = 0x0008 = UEFI I-O DATA USB Flash Disk 1242609221250144
[2023-10-24 16:38:26] PrintBootOrder: BootOrder[1] = 0x0001 = UEFI eMMC Device
It's important boot time on some embedded scene. so, We investigate how many seconds spent each compornent. We found the above time out messages.
On Xavier NX platforms where some _b FW partitions are on an eMMC device, FMP capsule update may fail with write protect errors when updating boot chain B FW, E.g.
Overwriting active adsp-fw partition not allowed
Error writing adsp-fw, Offset=0: Write Protected
Failed to write image=adsp-fw: Write Protected
This is caused by the FwImageDxe driver loading before the FwPartitionBlockIoDxe driver which makes the _b partitions unavailable during the capsule update. A fix to the FwImageDxe Depex is being developed to ensure that the drivers load in the correct order.
CapsuleApp uses the QueryCapsuleCapabilities UEFI RT service to detect the maximum supported capsule size which is currently set to 10MB. Current T194 and T234 capsules are over 11MB, so CapsuleApp fails with a capsule size error.
SMBIOS table type 19 is used to get memory information in UEFI menu.
When I build edk2 - nvidia/Platform/nvidia/Jetson/build. Sh, there will be such a mistake.
Traceback (most recent call last):
File "edk2/BaseTools/Edk2ToolsBuild.py", line 177, in
main()
File "edk2/BaseTools/Edk2ToolsBuild.py", line 173, in main
Edk2ToolsBuild().Invoke()
File "/home/user/Jetson_UEFI/nvidia-uefi/venv/lib/python3.8/site-packages/edk2toolext/base_abstract_invocable.py", line 146, in Invoke
retcode = self.Go()
File "edk2/BaseTools/Edk2ToolsBuild.py", line 148, in Go
raise Exception("Failed to build.")
Exception: Failed to build.
Hi,
When following the docs to build UEFI without docker(https://github.com/NVIDIA/edk2-nvidia/wiki/Build-without-docker)
Encountered below error with
[main]$ edk2-nvidia/Platform/NVIDIA/Jetson/build.sh
nvidia: building from workspace rooted at: /home/fadhelh/project/octo_v1/uefistrap/nvidia-uefi
nvidia: found command: python3.
nvidia: found command: virtualenv.
nvidia: found command: mono.
nvidia: found command: aarch64-linux-gnu-gcc.
nvidia: found Python 3.9 or later.
nvidia: Activating Python virtual environment.
nvidia: Updating build environment (edk2-nvidia/Platform/NVIDIA/Jetson/PlatformBuild.py).
Unable to use edk2-nvidia/Platform/NVIDIA/Jetson/PlatformBuild.py as a UpdateSettingsManager
Did you mean to use a different kind of invocable?
Traceback (most recent call last):
File "/home/fadhelh/.local/lib/python3.8/site-packages/edk2toolext/edk2_invocable.py", line 355, in ParseCommandLineOptions
self.PlatformModule = import_module_by_file_name(os.path.abspath(settingsArg.platform_module))
File "/home/fadhelh/.local/lib/python3.8/site-packages/edk2toollib/utility_functions.py", line 347, in import_module_by_file_name
spec.loader.exec_module(ImportedModule)
File "", line 848, in exec_module
File "", line 219, in _call_with_frames_removed
File "/home/fadhelh/project/octo_v1/uefistrap/nvidia-uefi/edk2-nvidia/Platform/NVIDIA/Jetson/PlatformBuild.py", line 10, in
from edk2nv.stuart import NVIDIASettingsManager, NVIDIAPlatformBuilder
File "/home/fadhelh/project/octo_v1/uefistrap/nvidia-uefi/edk2-nvidia/Silicon/NVIDIA/edk2nv/stuart/init.py", line 10, in
from .builder import * # noqa
File "/home/fadhelh/project/octo_v1/uefistrap/nvidia-uefi/edk2-nvidia/Silicon/NVIDIA/edk2nv/stuart/builder.py", line 12, in
from edk2toolext.environment.uefi_build import UefiBuilder
File "/home/fadhelh/.local/lib/python3.8/site-packages/edk2toolext/environment/uefi_build.py", line 24, in
from edk2toollib.uefi.edk2.parsers.dsc_parser import DscParser
File "/home/fadhelh/.local/lib/python3.8/site-packages/edk2toollib/uefi/edk2/parsers/dsc_parser.py", line 13, in
from edk2toollib.uefi.edk2.parsers.base_parser import HashFileParser
File "/home/fadhelh/.local/lib/python3.8/site-packages/edk2toollib/uefi/edk2/parsers/base_parser.py", line 13, in
from edk2toollib.uefi.edk2 import path_utilities
File "/home/fadhelh/.local/lib/python3.8/site-packages/edk2toollib/uefi/edk2/path_utilities.py", line 21, in
class Edk2Path(object):
File "/home/fadhelh/.local/lib/python3.8/site-packages/edk2toollib/uefi/edk2/path_utilities.py", line 329, in Edk2Path
def GetContainingModules(self, input_path: str) -> list[str]:
TypeError: 'type' object is not subscriptable
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/home/fadhelh/.local/bin/stuart_update", line 8, in
sys.exit(main())
File "/home/fadhelh/.local/lib/python3.8/site-packages/edk2toolext/invocables/edk2_update.py", line 120, in main
Edk2Update().Invoke()
File "/home/fadhelh/.local/lib/python3.8/site-packages/edk2toolext/base_abstract_invocable.py", line 200, in Invoke
self.ParseCommandLineOptions()
File "/home/fadhelh/.local/lib/python3.8/site-packages/edk2toolext/edk2_invocable.py", line 367, in ParseCommandLineOptions
Module = self.PlatformModule
AttributeError: 'Edk2Update' object has no attribute 'PlatformModule'
Please comment
Regards
edk2_docker edk2-nvidia/Platform/NVIDIA/Jetson/build.sh
found in
https://github.com/NVIDIA/edk2-nvidia/wiki/Build-without-docker#build-uefi
but if i try with edk2_docker inculded i will get edk2_docker: command not found
Hi,
Trying to run edk2-nvidia/Platform/NVIDIA/Jetson/build.sh after all installations and receive the following error:
nvidia: building from workspace rooted at: /home/niro/tmp/UEFI/nvidia-uefi
nvidia: found command: python3.
nvidia: found command: virtualenv.
nvidia: found command: mono.
nvidia: found command: aarch64-linux-gnu-gcc.
nvidia: found Python 3.10 or later.
nvidia: Creating Python virtual environment in /home/niro/tmp/UEFI/nvidia-uefi/venv...
created virtual environment CPython3.10.12.final.0-64 in 72ms
creator CPython3Posix(dest=/home/niro/tmp/UEFI/nvidia-uefi/venv, clear=False, no_vcs_ignore=False, global=False)
seeder FromAppData(download=False, pip=bundle, setuptools=bundle, wheel=bundle, via=copy, app_data_dir=/home/niro/.local/share/virtualenv)
added seed packages: pip==22.0.2, setuptools==59.6.0, wheel==0.37.1
activators BashActivator,CShellActivator,FishActivator,NushellActivator,PowerShellActivator,PythonActivator
/home/niro/tmp/UEFI/nvidia-uefi/edk2-nvidia/Platform/NVIDIA/Jetson/../../../Silicon/NVIDIA/scripts/prepare_stuart.sh: line 29: venv/bin/activate: No such file or directory
thoughts?
I was trying to enter BIOS menu but the keyboard is not working at boot up.
ESC, F11 and ENTER buttons are not working.
Specs:
Jetson Xavier NX with SEEED A206 carrier board
Jetpack 5.1 (L4T 35.2.1)
Keyboard works up to edk2-nvidia-r35.1-updates-20220930 6bc2699.
Keyboard is not working starting edk2-nvidia-202209.0 a87aded.
Tested by flasing uefi_jetson.bin in tarball from releases.
Hi
I am trying to build UEFI for NVIDIA Platforms without Docker for NX (jetson-xavier-nx-devkit-emmc),
I followed the instructions Build-without-docker.
My x86 host machine is
anshu@jetson-ubuntu22 :~/nvidia uefi [r35.2.1 updates] $python3-- version
Python 3.10.12
anshu@jetson-ubuntu22 :~/nvidia uefi [r35.2.1 updates]$
anshu@jetson-ubuntu22 :~/nvidia uefi [r35.2.1 updates] $lsd_release - a
No LSB modules are available
Distributor ID: Ubuntu
Description: Ubuntu 22.04.4 LTS
Release: 22.04
Codename: Jammy
I encountered an error
Uefi/Build/Jetson/DEBUG_GCC5/AARCH64/MedeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe/OUTPUT/ConPlatformDxe. efi&&GenSec - s EFI-SectiON-PE32- o/home/anshu/nvidia uefi/Build/Jetson/DEBUG_GCC5/Fv/Ffs/51ccf399-4fdf-4e55-a45b-e123f84d456aConPlatformDxe/51ccf399-4fdf-4e55-a 45b-e123f84d456aSEC2.1.pe32/home/anshu/nvidia uefi/Build/Jetson/DEBUG_GCC5/AARCH64/MedeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe/OUTPUT/ConPlatformDxee.efi
INFO - collect2: error: ld returned 1 exit status
INFO - make: * * * [GNUmakefile: 576:/home/anshu/nvidia uefi/Build/Jetson/DEBUG_GCC5/AARCH64/Silicon/NVIDIA/Drivers/EqosDeviceDxe/EqosDeviceDxe/DEBUG/EqosDeviceDxe. ll] Error 1
INFO-
INFO-
INFO - build. py
INFO -: error 7000: Failed to execute command
INFO - make tbuild [/home/anshu/nvidia uefi/Build/Jetson/DEBUG_GCC5/AARCH64/Silicon/NVIDIA/Drivers/EqosDeviceDxe/EqosDeviceDxe]
INFO-
INFO-
INFO - build. py
INFO -: error F002: Failed to build module
INFO -/home/anshu/nvidia uefi/edk2 nvidia/Silicon/NVIDIA/Drivers/EqosDeviceDxe/EqosDeviceDxe. inf [AARCH64, GCC5, DEBUG]
INFO-
INFO -- Failed-
INFO - Build end time: 03:03:15, May.15 2024
INFO - Build total time: 00:07:33
INFO-
INFO -------------------------------------------------
INFO -------- Command Output Completed---------------
INFO -- Running Time (mm: ss): 07:33----------
INFO -------- Return Code: 0x00000001------------
INFO -------------------------------------------------
Error - Compiler # 7000 from: Failed to execute command
Error - EDK2 # 002 from: Failed to build module
CRITICAL - Build failed
PROCESS - End time: 2024-05-15 03:03:15.760337 Total time Elapsed: 0:07:33
Section - Log file is located at:/home/anshu/nvidia uefi/Building/BUILDLOG_Jetson.txt
Section - Summary
Error - Error
I encountered this error on both r35.2.1 updates and r35.2.1 Combo
edkrepo clone nvidia-uefi NVIDIA-Platforms r35.2.1-updates
edkrepo clone nvidia-uefi NVIDIA-Platforms r35.2.1
Does anyone know how to solve it, this is BUILDLOG_Jetson.txt during r35.2.1-updates
BUILDLOG_Jetson.txt
EQOS is not starting in UEFI correctly causing the device to not work correctly.
As I was reading through the code I noticed that
probably was meant to be: FwPackageCopyImageName (PkgName, PkgImageInfo, sizeof (PkgName));
instead of the current:
FwPackageCopyImageName (PkgName, PkgImageInfo, FW_IMAGE_NAME_LENGTH);
as the length is in terms of bytes, and not CHAR16
s from my reading of the function's description, and other usages of it in this file.
On page https://github.com/NVIDIA/edk2-nvidia/wiki/Combos
Using r36.3 and r36.3-updates gets:
$ edk2_docker edkrepo clone nvidia-uefi NVIDIA-Platforms r36.3.0-updates
Cloning global manifest repository to: /home/ph/.edkrepo/edk2-edkrepo-manifest-main from: https://github.com/tianocore/edk2-edkrepo-manifest.git
Cloning global manifest repository to: /home/ph/.edkrepo/nvidia from: https://github.com/NVIDIA/edk2-edkrepo-manifest.git
Verifying the global manifest repository entry for project: NVIDIA-Platforms
Error: The selected COMBINATION/SHA is not present in the project manifest file or does not exist.
Exiting without performing clone operation.
r36.3.0-updates (And i guess r36.3.0) works, so there is just a .0
missing.
If system is configured for ACPI mode in some boot flows a minimal DTB is installed by the OS launcher application and in this case there may be system crashes related to the application of device tree overlays.
The TegraPlatformSpec and TegraPlatformCompatSpec UEFI variables read by FmpDeviceLib are not written with null termination bytes. UEFI shoud ensure its copies of these variables are null-terminated passing them to functions that require null-terminated strings.
During UEFI boot, the system sometimes hits an unhandled exception in EL3.
Need to shutdown network activity at UEFI exit especially in the case of ACPI boot as the memory set aside for that may be reclaimed by operating system.
I recently opened a forum post about this issue. In diagnosing I added logs around why the nvme was failing to be recognized and found that the NvmExpress Driver was failing to create a second queue for the Completion and Submission queues.
As a simple test I hardcoded the NvmeCreateIoCompletionQueues
and NvmeCreateIoSubmissionQueues
functions to stop after the first queue which did work to get the system to boot from my NVMe drive, but I know it is not a valid long term solution that would work for all drives.
Changed console settings under Boot Menu => Boot Maintenance Manager => Console Options => Console [Input|Output|Standard Error] Device Select do not persist through a device reboot.
Add a .gitattributes for the binary assets; check in source files in a manner that line endings are not CRLF but utilize the best practices for source modules being checked into a repository having their line endings as LF. This is controlled by a client using the git config setting core.autocrlf on Windows set to something other than false.
.gitattributes example:
This shows up when attempting to apply patches from a machine running Linux using bitbake as a build system.
Possible command to utilize:
find . -type f ! -path './.git/' ! -path '.bmp' -print | xargs -L 1 dos2unix
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.