Device: Aeotec Smart Switch 6
Manufacturer: Aeon Labs
Manufacturer ID: 86
Device ID: 60
Device Type: 103
Notes:
I was able to configure it like an individual port on the 6 port Aeotec power strip, including meter classes to pull concurrent watts and total kwH. In addition the manual is sparse, but they did include this tidbit: Parameter 81 (1 byte dec) can be used to change between 3 LED modes. 0=Energy Mode, 1=Momentary Indicate Mode, 2=Night Light Mode
//Aeotec Smart Switch 6
Switch Smart6 "Smart6" (outlets) {zwave="6:0:command=switch_binary" }
Number Smart6_Power "Smart6 power [%.2f W]" (power) {zwave="6:0:command=meter,meter_scale=E_W,refresh_interval=30" }
Number Smart6_Energy "Smart6 consumption [%.2f KWh]" (power) {zwave="6:0:command=meter,meter_scale=E_KWh,refresh_interval=30" }
Number Smart6_Volts "Smart6 voltage [%.2f V]" (All,power) {zwave="6:0:command=meter,meter_scale=E_V,refresh_interval=30"}
Number Smart6_Amps "Smart6 amperage [%.2f A]" (All,power) {zwave="6:0:command=meter,meter_scale=E_A,refresh_interval=30"}
I do not have the engineering doc yet. It is only a coincidence that it is device #6 on my zwave network :)
Jim
2015-05-28 21:09:19.897 [WARN ] [.o.b.z.i.p.c.ZWaveCommandClass] - NODE 6: Unsupported command class ZWAVE_PLUS_INFO
2015-05-28 21:09:19.897 [WARN ] [.o.b.z.i.p.c.ZWaveCommandClass] - NODE 6: Unsupported command class SWITCH_ALL
2015-05-28 21:09:19.898 [WARN ] [.o.b.z.i.p.c.ZWaveCommandClass] - NODE 6: Unsupported command class CLOCK
2015-05-28 21:09:19.898 [WARN ] [.o.b.z.i.p.c.ZWaveCommandClass] - NODE 6: Unsupported command class ASSOCIATION_GROUP_INFO
2015-05-28 21:09:19.899 [WARN ] [.o.b.z.i.p.c.ZWaveCommandClass] - NODE 6: Unsupported command class FIRMWARE_UPDATE_MD
2015-05-28 21:09:19.899 [WARN ] [.o.b.z.i.p.c.ZWaveCommandClass] - NODE 6: Unsupported command class POWERLEVEL
2015-05-28 21:09:19.966 [WARN ] [.o.b.z.i.p.c.ZWaveCommandClass] - NODE 6: Unsupported command class ZWAVE_PLUS_INFO
2015-05-28 21:09:19.967 [WARN ] [.o.b.z.i.p.c.ZWaveCommandClass] - NODE 6: Unsupported command class SWITCH_ALL
2015-05-28 21:09:19.967 [WARN ] [.o.b.z.i.p.c.ZWaveCommandClass] - NODE 6: Unsupported command class CLOCK
2015-05-28 21:09:19.967 [WARN ] [.o.b.z.i.p.c.ZWaveCommandClass] - NODE 6: Unsupported command class ASSOCIATION_GROUP_INFO
2015-05-28 21:09:19.968 [WARN ] [.o.b.z.i.p.c.ZWaveCommandClass] - NODE 6: Unsupported command class FIRMWARE_UPDATE_MD
2015-05-28 21:09:19.968 [WARN ] [.o.b.z.i.p.c.ZWaveCommandClass] - NODE 6: Unsupported command class POWERLEVEL
2015-05-28 21:09:21.931 [WARN ] [z.i.p.i.ZWaveNodeStageAdvancer] - NODE 6: Node advancer: SET_ASSOCIATION - Unknown device: 86:103:60
2015-05-28 21:09:22.038 [WARN ] [z.i.p.i.ZWaveNodeStageAdvancer] - NODE 6: Node advancer: GET_CONFIGURATION - Unknown device: 86:103:60
2015-05-28 21:09:22.183 [WARN ] [.z.internal.ZWaveActiveBinding] - NODE 6: No item bound for event, endpoint = 0, command class = SWITCH_BINARY, value = 0, ignoring.
2015-05-28 21:09:22.392 [WARN ] [.z.internal.ZWaveActiveBinding] - NODE 6: No item bound for event, endpoint = 0, command class = METER, value = 0E+1, ignoring.
2015-05-28 21:09:22.623 [WARN ] [.z.internal.ZWaveActiveBinding] - NODE 6: No item bound for event, endpoint = 0, command class = METER, value = 123.597, ignoring.
2015-05-28 21:09:22.832 [WARN ] [.z.internal.ZWaveActiveBinding] - NODE 6: No item bound for event, endpoint = 0, command class = METER, value = 0.016, ignoring.
2015-05-28 21:09:23.052 [WARN ] [.z.internal.ZWaveActiveBinding] - NODE 6: No item bound for event, endpoint = 0, command class = METER, value = 0E+1, ignoring.