AC500+2B300S difference between 0.0.16 and 0.0.20 about hassio-bluetti-bt

[Patrick762]

I changed the base for the integration so it has a smaller footprint in total, but might have missed some parts. I'll look into it.

I have only tested the EP600 and EB3A with the changes.

[Patrick762]

FYI those are the things I missed:

1. Added register polling for those addresses
2. Added register polling for this address
3. Not changed, should already work
4. Added register polling for those addresses
5. Added register polling for this address
6. Changed scaling
7. Changed scaling
8. Added register polling for this address
9. Added register polling for this address
10. Added register polling for this address
11. Removed addresses from normal polling (now it's pack polling only)

[Patrick762]

Changes are now in Pull Request #77

[Patrick762]

Looks like Enums now work as expected

[Patrick762]

@ItsMe00007 New version is now available: 0.0.21

[ItsMe00007]

Hi Patrick,
wow, that was really fast !!!!
Looks much better now.

Only the Battery Pack 1 and 2 are "unavailable". They were working in 0.0.16.

[Patrick762]

Pack polling takes around 5 seconds per pack.

If I have some time tomorrow I'll test the latest version on an AC300 (very similar)

[danrichardson]

I can confirm that the battery pack values are not present on my AC300 0.0.21 as well.

[ItsMe00007]

AC500+2xB300S: Current status with 0.0.21:

1. Battery Pack Info is ok in 0.0.16, but unavailable in 0.0.21.

2. All 3 DC Internal Inputs have wrong scaling factor:
   Voltage: should be 90,1 instead of 901
   Power: should be 303 instead of 30,3
   Current: should be 3,3 instead of 0,33

Then it would match the Power/Voltage/Current from PV Input 1 (currently measured externally)

[Patrick762]

@ItsMe00007 Can you tell me which entity names you mean in 2.?

[ItsMe00007]

@ItsMe00007 Can you tell me which entity names you mean in 2.?

I mean these entities:
Internal DC Input Current
Internal DC Input Power
Internal DC Input Voltage

Scaling should be:
Internal DC Input Current: x100
Internal DC Input Power: x10
Internal DC Input Voltage: x0.1

[ItsMe00007]

I just tested the new 0.0.22:
AC500 Battery Pack info is still "unavailable"

[ItsMe00007]

I just tested the new 0.0.23:

AC500 Battery Pack info is still "unavailable", the latest Version where it worked was 0.0.16.
I have automations which depend on these values, therefore I had to go o 0.0.16.

Any chance to get that fixed ?

[Patrick762]

Should be fixed in Release 0.1