philh30 / st-edge-drivers Goto Github PK
View Code? Open in Web Editor NEWLicense: Apache License 2.0
License: Apache License 2.0
There are multiple versions of the GE Direct-Wire Outdoor Switch 14285.
Need to add this fingerprint to the driver.
Any chance this model could be supported?
https://www.amazon.com/dp/B01M1NOZJU?psc=1&ref=ppx_yo2ov_dt_b_product_details
It is dual switch... would be awesome if you could disable on off for one side.
Hello, is it possible to add support for this Zigbee switch? Everything works with the SmartthingsCommunity driver, but as of recently the power metering has been reading incorrectly. For example, my switch is currently reading 0.0426w when it should be 42.6w.
(Left a comment on the forums, but thought I'd put a formal issue here as well)
I switched over to this driver for my GE Plug-in Dual Smart Switch, Independant Control (ZW4105). Before (in the DTH days) this reported as a Z-Wave Dual Switch and would create two devices so that each outlet on the Smart Switch could be controlled independently.
However, when the migration occurred, it showed up only as a "Z-Wave Outlet"... not a "Z-Wave Dual Switch" like it had before. So I switched over to these drivers to see if that would fix the problem. Unfortunately, it hasn't.
When I enroll in these drivers and set my switch to use them, it only shows a single device in the ST app and turning the power on/off will control both outlets simultaneously instead of independently.
Any help would be greatly appreciated. Thanks so much! :)
The 653 is exposed as a thermostat to Alexa, which means I can now ask for the temp which I couldn't with the TDH implementation but I cannot control the Circuits.
P_-SSSS_---WA_
Can you please add a profile with no Solar?
Can you change default: "" to default: "1" for Association Groups 1,2,3,4.
For some reason, I can't edit these values in Settings when this driver is installed.
According to our conversations, this should populate contact closure, voltage.
Any chance this dimmer could also be included?
Hello,
I realized that my GE Motion Switch did not have all of the features exposed, and is using the ZWave Switch driver. I fund your post here: https://community.smartthings.com/t/st-edge-driver-for-ge-jasco-z-wave-motion-switches-and-dimmers-24770-26931-26932-26933/237043
As usual, I accepted the invite and enrolled my hub. But when I select to "Change Driver" your driver is not appearing. I'm not sure why.
I looked in your fingerprint file and see the entry:
- id: "0063/494D/3032"
deviceLabel: GE Motion Switch 26931
manufacturerId: 0x0063
productType: 0x494D
productId: 0x3032
And when I look in "my.smartthings.com" I see the device as:
Manufacturer Code
0063-494D-3032
Model
494D-3032
Type
ZWAVE
Execution Location
Local
I can't seem to determine why the driver would not show up as an option to switch to?
Any suggestions?
Can the fingerprint below be added to the lock driver as my Kwikset 910 lock is not being picked up currently. I figure this driver will be updated sooner than the official ST driver.
type:4003
mfr:0090
prod:0003
model:0236
Looks like there is a combination of a 0001/0236 but not a 0003/0236.
Thank you!
I have 2 sony tv's. 1st one (75'') can be added using your edge driver and control with no issues.
2nd one (65'') can't be added. I think I was able to add with your previous version of the driver. While trying to log I'm getting something like :
2023-02-17T03:07:59.473918569+00:00 TRACE Sony Bravia TV Received event with handler environment_info
2023-02-17T03:07:59.474810903+00:00 TRACE Sony Bravia TV Received event with handler environment_info
2023-02-17T03:07:59.476244903+00:00 DEBUG Sony Bravia TV Z-Wave hub node ID environment changed.
2023-02-17T03:07:59.480446236+00:00 TRACE Sony Bravia TV Received event with handler discovery
2023-02-17T03:07:59.554633903+00:00 INFO Sony Bravia TV ===== SCANNING NETWORK…
2023-02-17T03:08:04.601005905+00:00 INFO Sony Bravia TV ===== SCAN COMPLETE!
2023-02-17T03:08:04.620248905+00:00 DEBUG Sony Bravia TV discovery device thread event handled
2023-02-17T03:09:28.065064612+00:00 TRACE Sony Bravia TV Received event with handler discovery
2023-02-17T03:09:28.066387612+00:00 TRACE Sony Bravia TV Received event with handler driver_lifecycle
I can sniff IP messages from 2nd TV using wireshark or airodump if this can help.
Also, I can use my phone to control both TV's with Video & TV SideView : Remote
https://play.google.com/store/apps/details?id=com.sony.tvsideview.phone&hl=en_US&pli=1
Please advice....
Feature request, please add support for Jasco 28168 plug-in switch. You already support 28167 and 28169. And I see a recent pull request to support 28166. Thanks for these drivers, they're a load better than the built-in drivers suppled by ST.
P.S. How can I buy you a coffee? (Is there a donate button?)
Jasco started providing public firmware updates (https://github.com/jascoproducts/firmware) a few months ago, and changelogs for many of the ge-zwave-switch driver's ge--assoc devices mention parameter 19 being added. I've tested these updates on my own ZW4005/14291 (ge-switch-assoc) and ZW4002/14287 (ge-fan-assoc) devices and alternate exclusion seems to work just like it does for my ZW4008/46201 (ge-switch-scene). Can alternate exclusion be added to these ge--assoc drivers?
Hi,
can you add MH-S312 in your driver, please?
ID: 015F-3121-5102
https://github.com/philh30/ST-Edge-Drivers/blob/main/MCOHome/mcohome-zwave-switch/fingerprints.yml
Thanks
Sebastian
I installed the GE Z-Wave Switch/Dimmer/Fan/Outlet driver for my Enbrighten Z-Wave In-Wall Smart Toggle Dimmer with your diver.
The Button option is not active. I have added an ID to association group 2. I don't have an association group 1. Is there something else I need to do to be able to use the button feature?
Thank you
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.