Overture is a DNS server/forwarder/dispatcher written in Go.
Overture means an orchestral piece at the beginning of a classical music composition, just like DNS which is nearly the first step of surfing the Internet.
Please note: If you are using the binary releases, please follow the instructions in the README file with corresponding git version tag. The README in master branch are subject to change and does not always reflect the correct instructions to your binary release version.
- Full IPv6 support
- Multiple DNS upstream
- Via UDP/TCP with custom port
- Via SOCKS5 proxy (TCP only)
- With EDNS Client Subnet (ECS) RFC7871
- Dispatcher
- IPv6 record (AAAA) redirection
- Custom IP network
- Custom domain
- Minimum TTL modification
- Hosts (prefix wildcard, random order of multiple answers)
- Cache with ECS
Overture forces IPv6 and custom domain DNS queries to use alternative DNS when applicable.
As for custom IP network, overture will first query the domain with primary DNS, if the answer is empty or the IP is not matched then overture will query the alternative DNS servers and use their answer instead.
You can download binary releases from the release.
For ArchLinux users, package overture
is available in AUR. If you use a AUR helper i.e. yaourt
, you can simply run:
yaourt -S overture
For mips users, please assure the kernel FPU emulation is enabled, check #32 #26 golang/go#18880 for details.
Start with the default config file -> ./config.json
$ ./overture
Or use your own config file:
$ ./overture -c /path/to/config.json
Verbose mode:
$ ./overture -v
Log to file:
$ ./overture -l /path/to/overture.log
For other options, please see help:
$ ./overture -h
Tips:
- Root privilege is required if you are listening on port 53.
- For Windows users, you can run overture on command prompt instead of double click.
Configuration file is "config.json" by default:
{
"BindAddress": ":53",
"PrimaryDNS": [
{
"Name": "DNSPod",
"Address": "119.29.29.29:53",
"Protocol": "udp",
"SOCKS5Address": "",
"Timeout": 6,
"EDNSClientSubnet": {
"Policy": "disable",
"ExternalIP": ""
}
}
],
"AlternativeDNS": [
{
"Name": "OpenDNS",
"Address": "208.67.222.222:443",
"Protocol": "tcp",
"SOCKS5Address": "",
"Timeout": 6,
"EDNSClientSubnet": {
"Policy": "disable",
"ExternalIP": ""
}
}
],
"OnlyPrimaryDNS": false,
"RedirectIPv6Record": false,
"IPNetworkFile": "./ip_network_sample",
"DomainFile": "./domain_sample",
"DomainWhiteFile": "./domain_white_sample",
"DomainBase64Decode": true,
"HostsFile": "./hosts_sample",
"MinimumTTL": 0,
"CacheSize" : 0,
"RejectQtype": [255]
}
Tips:
- BindAddress: Specifying only port (e.g.
:53
) will have overture listen on all available addresses (both IPv4 and IPv6). Overture will handle both TCP and UDP requests. Literal IPv6 addresses are enclosed in square brackets (e.g.[2001:4860:4860::8888]:53
) - DNS: You can specify multiple DNS upstream servers here.
- Name: This field is only used for logging.
- Address: Same as BindAddress.
- Protocol:
tcp
orudp
- SOCKS5Address: Forward dns query to this SOCKS5 proxy,
โโ
to disable. - EDNSClientSubnet: Used to improve DNS accuracy. Please check RFC7871 for
details.
- Policy
auto
: If client IP is not in the reserved IP network, use client IP. Otherwise, use external IP.disable
: Disable this feature.
- ExternalIP: If this field is empty, ECS will be disabled when the inbound IP is not an external IP.
- Policy
- OnlyPrimaryDNS: Disable dispatcher feature, use primary DNS only.
- RedirectIPv6Record: Redirect IPv6 DNS queries to alternative DNS servers.
- File: Absolute path like
/path/to/file
is allowed. For Windows users, please use properly escaped path likeC:\\path\\to\\file.txt
in the configuration. - MinimumTTL: Set the minimum TTL value (in seconds) in order to improve caching efficiency, use
0
to disable. - CacheSize: The number of query record to cache, use
0
to disable. - RejectQtype: Reject inbound query with specific DNS record types, check List of DNS record types for details.
example.com
xxx.xx
example.com
xxx.xx
1.0.1.0/24
10.8.0.0/16
::1/128
127.0.0.1 localhost
::1 localhost
10.8.0.1 example.com
192.168.0.2 *.xxx.xx
- DNSPod 119.29.29.29:53
For DNSPod, ECS only works via udp, you can test it by patched dig
You can compare the response IP with the client IP to test the feature. The accuracy depends on the server side.
$ dig @119.29.29.29 www.qq.com +client=119.29.29.29
; <<>> DiG 9.9.3 <<>> @119.29.29.29 www.qq.com +client=119.29.29.29
; (1 server found)
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 64995
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 1
;; OPT PSEUDOSECTION:
; EDNS: version: 0, flags:; udp: 4096
; CLIENT-SUBNET: 119.29.29.29/32/24
;; QUESTION SECTION:
;www.qq.com. IN A
;; ANSWER SECTION:
www.qq.com. 300 IN A 101.226.103.106
;; Query time: 52 msec
;; SERVER: 119.29.29.29#53(119.29.29.29)
;; WHEN: Wed Mar 08 18:00:52 CST 2017
;; MSG SIZE rcvd: 67
$ dig @119.29.29.29 www.qq.com +client=119.29.29.29 +tcp
; <<>> DiG 9.9.3 <<>> @119.29.29.29 www.qq.com +client=119.29.29.29 +tcp
; (1 server found)
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 58331
;; flags: qr rd ra; QUERY: 1, ANSWER: 3, AUTHORITY: 0, ADDITIONAL: 1
;; OPT PSEUDOSECTION:
; EDNS: version: 0, flags:; udp: 4096
;; QUESTION SECTION:
;www.qq.com. IN A
;; ANSWER SECTION:
www.qq.com. 43 IN A 59.37.96.63
www.qq.com. 43 IN A 14.17.32.211
www.qq.com. 43 IN A 14.17.42.40
;; Query time: 81 msec
;; SERVER: 119.29.29.29#53(119.29.29.29)
;; WHEN: Wed Mar 08 18:01:32 CST 2017
;; MSG SIZE rcvd: 87
- Dependencies:
- Code reference:
- skydns: MIT
- go-dnsmasq: MIT
- Contributors: @V-E-O, @sh1r0, @maddie, @hexchain, @everfly, @simonsmh, @jemyzhang
This project is under the MIT license. See the LICENSE file for the full license text.