Requires R.
Full document is on the Wiki page
- For Windows, if
r.rterm.windows
is empty, then the path toR.exe
will be searched in Windows registry. If your R is not installed with path written in registry or if you need a specific R executable path, set it to a path like"C:\\Program Files\\R\\R-3.3.4\\bin\\x64\\R.exe"
. - For Radian console, enable config
r.bracketedPaste
- Open your folder that has R source file (Can't work if you open only file)
- Use
F1
key andR:
command orCtrl+Enter
(Mac:⌘+Enter
)
- Run Source(
Ctrl+Shift+S
or Push icon) and Run Selected Line (
Ctrl+Enter
) - Run
nrow
,length
,head
,thead
,names
functions (Ctrl
+1
,2
,3
,4
,5
)- If you are using Mac
Ctrl
to⌘
- If you are using Mac
- R Integrated Terminal
- Run code in terminal containing existing R session, for example over SSH (
Run Selection/Line in Active Terminal
) - Run all commands in terminal containing existing R session (enable config
r.alwaysUseActiveTerminal
)
- Extended Syntax(R, R Markdown, R Documentation)
-
Create .gitignore based R.gitignore
-
Data frame viewer and Environment viewer(
Preview Data frame
orPreview Environment
)
-
Snippets
-
Package development short cut (
Load All
,Test Package
,Install Package
,Build Package
andDocument
) -
Bind keys to custom R commands using command runner functions (
r.runCommand
,r.runCommandWithEditorPath
,r.runCommandWithSelectionOrWord
)
- R base from https://www.r-project.org/
This extension contributes the following settings:
-
r.rterm.windows
: set to R.exe path for Windows -
r.rterm.mac
: set to R term's path for Mac OS X -
r.rterm.linux
: set to R term's path for Linux -
r.rpath.lsp
: set to R.exe path for Language Server Protocol -
r.rterm.option
: R command line options (i.e: --vanilla) -
r.source.encoding
: An optional encoding to pass to R when executing the file -
r.source.focus
: Keeping focus when running (editor or terminal) -
r.alwaysUseActiveTerminal
: Use active terminal for all commands, rather than creating a new R terminal -
r.bracketedPaste
: For consoles supporting bracketed paste mode (such as Radian) -
r.sessionWatcher
: Enable R session watcher (experimental) -
r.rtermSendDelay
: Delay in milliseconds before sending each line to rterm (only applies if r.bracketedPaste is false) -
Language server(developing here)
This experimental feature is still under development and the behavior may change without notice. Please file an issue here if you experience problems or have any suggestions.
An opt-in experimental R session watcher is implemented to support the following features:
- Watch any R session
- Show value of session symbols on hover
- Provide completion for session symbols
View()
any objects including data frames and list objects- Show plot output on update and plot history
- Show htmlwidgets, documentation and shiny apps in WebView
To enable this feature, turn on r.sessionWatcher
in VSCode settings, reload or restart VSCode, and the session watcher will be activated automatically
on R sessions launched by vscode-R via R: Create R Terminal
command.
If you previously appended the source(...)
line to ~/.Rprofile
, you may safely remove it since the configuration for basic usage is automated. It is
now only necessary for advanced usage described below.
For advanced users to work with self-managed R sessions (e.g. manually launched R terminal or started in tmux
or screen
window), some extra
configuration is needed. Follow the steps below to make R session watcher work with any external R session:
-
Turn on
r.sessionWatcher
in VSCode settings. -
Edit
.Rprofile
in your home directory by running the following code in R:file.edit("~/.Rprofile")
-
Append the following code to the file:
source(file.path(Sys.getenv(if (.Platform$OS.type == "windows") "USERPROFILE" else "HOME"), ".vscode-R", "init.R"))
-
Restart or Reload Window in VSCode
If the workspace folder you open in VSCode already has a .Rprofile
, you need to append the code above in this file too because ~/.Rprofile
will not
be executed when a local .Rprofile
is found.
The script only works with environment variable TERM_PROGRAM=vscode
. the script will not take effect with R sessions started in a tmux
or screen
window that does not have it, unless this environment variable is manually set before sourcing init.R
, for example, you may insert a line Sys.setenv(TERM_PROGRAM="vscode")
before it.
For the case of basic usage, turning off r.sessionWatcher
in VSCode settings is sufficient
to disable R session watcher.
For the case of advanced usage, user should, in addition, comment out or remove the source(...)
line appended to ~/.Rprofile
.
This script writes the metadata of symbols in the global environment and plot file to ${workspaceFolder}/.vscode/vscode-R/PID
where PID
is the R process ID. It also captures user input and append command lines to ${workspaceFolder}/.vscode/vscode-R/response.log
, which enables the communication between vscode-R and a live R sesson.
Each time the extension is activated, the latest session watcher script (init.R
) will be deployed to ~/.vscode-R/init.R
.
R sessions started from the workspace root folder will be automatically attached. The session watcher is designed to work in a wide range of scenarios:
- Official R terminal or
radian
console - R session started by vscode-R or user
- R session in a
tmux
orscreen
window - Switch between multiple running R sessions
- Remote Development via SSH, WSL and Docker
The status bar item shows the process id of the attached R session. Click the status bar item and it will attach to currently active session.
The R terminal used in the screenshot is radian which is cross-platform and supports syntax highlighting, auto-completion and many other features.
There are 3 ways you can use extension functions to create keybindings that run R commands in the terminal:
r.runCommand
to make a keybinding to run any R expression.r.runCommandWithEditorPath
to create a keybinding for an R expression where the placeholder value$$
is interpolated with the current file path.runCommandWithSelectionOrWord
to create a keybinding for an R expression where$$
is interpolated with the current selection or the current word the cursor is on.
Here are some example entries from keybindings.json
:
[
{
"description": "run drake::r_make()",
"key": "ctrl+;",
"command": "r.runCommand",
"when": "editorTextFocus",
"args": "drake::r_make()"
},
{
"description": "load drake target at cursor",
"key": "ctrl+shift+;",
"command": "r.runCommandWithSelectionOrWord",
"when": "editorTextFocus",
"args": "drake::loadd($$)"
},
{
"description": "knit to html",
"key": "ctrl+i",
"command": "r.runCommandWithEditorPath",
"when": "editorTextFocus",
"args": "rmarkdown::render(\"$$\", output_format = rmarkdown::html_document(), output_dir = \".\", clean = TRUE)"
}
]
- Debug
- Please see CONTRIBUTING.md
This extension based on
I hope you will join us.
-
Q: I can't use command and message is
xxx no command found
. -
A: Please open your folder that has R source file
-
Q: About code formatter, completion, definition...
-
A: Please visit to the language server issues
Other past questions can be found from StackOverflow or issues
The R logo is © 2016 The R Foundation