rafalgr Goto Github PK

outlander-phev-ac-charger

Sketch and libraries for Arduino Due CAN to enable ac charging from the Mitsubishi Outlander PHEV OBC

pid-stm32f746

Embedded graphical interface for PID control

pidgc

Raspberry Pi / Teensy based Digital Gauge Cluster

pq-flasher

This repository conatains tools to reflash a PQ35 VW EPS, it also contains some useful libraries to deal with the TP 2.0 transport layer and abstracts away the KWP2000 diagnsotics protocol.

proteus

python-udsoncan

Python implementation of UDS (ISO-14229) standard.

rejsacan-esp32

ESP32 board with CAN interface, runs on 12V power (with auto shutdown)

rpianc

Active Noise Control on Raspberry Pi

rusefi

rusefi - GPL internal combustion engine control unit

rusefi-hardware

sardinecan-arduino

Arduino firmware for Sardine CAN (Open Source J2534 device)

savvycan

QT based cross platform canbus tool

scg-ecu-1.0

Standalone ECU designed for Speeduino firmware

serial-oscilloscope

simpbms-spaceballs

Custom SimpBMS

simpbmswebui

A simple Web Interface for SIMPBMS

simpdisplay

A Nextion Display to work with the SimpBMS

simpiso

An Open Source HV Isolation monitor

simpleisa

Simple library for IVT shunts

sparkfun_adxl345_arduino_library

Arduino Library for the ADXL345

speeduino

Speeduino - Arduino based engine management

stm32-plc

STM32 microcontroller with lots of periferials such as ADC, differential ADC, Input Capture, PWM, USB, Encoder, DAC, Digital Input, RTC, CAN-bus + Alarm etc.

stm32-vcu

A Vehicle Control Unit for Electric Vehicle Conversion Projects based on an STM32F107. Software based on the Openinverter Project.

stm32_dsp_reverb

stm32_mega

STM32 based Arduino Mega replacement for speeduino

stm32_pdm_microphone

teensy-4.1-example

Kicad files to make a custom Teensy 4.1, based on the official Teensy schematics. Tested and verified.

teensy-can-bus-controller-in-ev

Using Teensy 4.0 and 3.2 to retrofit a Ford Ranger EV. Together with Simp BMS, openinverter and Tesla charger

teensy-convolutionsdr

teensy-eurorack

Hardware Design: Eurorack shield for teensy 4.1 with 14 in / 16 out analog channels