rapidscada / scada-community

Modules and tools for Rapid SCADA developed by the community

scada-community

Modules and tools for Rapid SCADA developed by the community.

How to Contribute

Make a fork of this repository. Create a new branch within your fork. When you are ready and your changes are tested, submit a pull request to pass the new code to this repository. See this manual for the details.

Known GitHub Repositories Related to Rapid SCADA:

• OPC UA Driver https://github.com/syndrome5/KpOpcUA
• MQTT and Workflow Drivers https://github.com/bersim/OpenKPs
• Raspberry Pi, Mercury Meter Drivers https://github.com/Manjey73/OpnenKPs
• Sound Alarm Module https://github.com/kolod/modalarm

scada-community's Issues

GrafanaDataProvider, too much datapoints

Why I got too much data for 5 minutes request? I access it from Node-RED: https://gist.github.com/kumajaya/88835061782797f632e1581a06250619

And no data update in between 23:59 - 06:59.

GrafanaDataProvider Installation on linux

Nice work! can you also write an instruction about GrafanaDataProvider installation on linux?

Averaging formulas not working Ok

Hi. I have tried many combinations of averaging formulas (both MovAvg and TimeAavg) in several projects, but have found the formulaas do not work when used on more than one input channel (2 or more).

When 2 or more input channels are set to calculate averages in the same project, for independent *(non-related) devices and signals, the channels start behaving like they are correlated, showinmg periodic interruptions (zeroes) at the same time.

Also, the scaale of the measures is changed inexplicably, showing much lower o higher than nominal levels for a given signal.

It´s like the formulas for different channels were sharing the same adding arrays and data and the functions simply merge together some of the data.

GrafanaDataProvider Not supported 6.1.1?

Deploy GrafanaDataProvider service in windows environment, web.config file configure scadaweb environment, web if is 5.8.4, grafana show normal. 6.1.1 can't get data under 6.1.1. Is it because of the change of dat file name between the two versions?

Is it necessary to modify this part of the code to be able to do it? But I don't find this part in github?

Installation Instructions

Hi, I'm new with RapidScada... Can someone please provide installation instructions for this MQTT plugin.

Thank you.

JSON formatted payload support

Any plant to add JSON formatted payload as I asked here? Or just like my own dirty solution for ThingsBoard.