rastafouille / airbee Goto Github PK
View Code? Open in Web Editor NEWProjet de ruche connectée / Connected hive project
Projet de ruche connectée / Connected hive project
Bonjour, avec le code, la valeur en gramme est limitée a 65635 ( a peu pres), pour ne plus avoir cette limitation, il faut modifier uint16_t en uint32_t pour le payload weight a 2 endroits dans l'ino et aussi modifier le callback dans le backend sigfox
`//TIME https://github.com/PaulStoffregen/Time
#include <TimeLib.h>
int tempo = 92;
int PERIODE =90;
int chrono = 99;
//WEIGHT https://github.com/bogde/HX711
#include "HX711.h"
HX711 scale;
float final;
float inter;
//SLEEP MODE http://donalmorrissey.blogspot.fr/2010/04/sleeping-arduino-part-5-wake-up-via.html
#include <avr/sleep.h>
#include <avr/power.h>
#include <avr/wdt.h>
volatile int f_wdt=1;
//DHT humidity/temperature sensors
// REQUIRES the following Arduino libraries:
// - DHT Sensor Library: https://github.com/adafruit/DHT-sensor-library
// - Adafruit Unified Sensor Lib: https://github.com/adafruit/Adafruit_Sensor
#include "DHT.h"
#define DHTPIN 2
#define DHTTYPE DHT22
DHT dht(DHTPIN, DHTTYPE);
// connexion serie pour Sigfox
#include <SoftwareSerial.h>
SoftwareSerial SigFox(4,5); // RX, TX
//définition des variable pour le payload SF
typedef struct {
uint8_t id;
int16_t temperature;
uint16_t humidity;
uint32_t weight;
uint8_t vbat;
} rowPayload_s;
union payload_u
{
rowPayload_s data;
uint8_t rawData[sizeof(rowPayload_s)];
} payload;
//
void setup()
{
pinMode(13, OUTPUT);
dht.begin();
if (DEBUG)
{ Serial.begin(9600);Serial.println("Starting up"); delay(100);}
SigFox.begin(9600);
if (DEBUG){print_date(); }
/*** Setup the WDT /
/ Clear the reset flag. /
MCUSR &= ~(1<<WDRF);
/ In order to change WDE or the prescaler, we need to set WDCE (This will allow updates for 4 clock cycles)./
WDTCSR |= (1<<WDCE) | (1<<WDE);
/ set new watchdog timeout prescaler value /
WDTCSR = 1<<WDP0 | 1<<WDP3; / 8.0 seconds /
/ Enable the WD interrupt (note no reset). */
WDTCSR |= _BV(WDIE);
// WEIGHT
// parameter "gain" is ommited; the default value 128 is used by the library
// HX711.DOUT - pin #A1
// HX711.PD_SCK - pin #A0
scale.begin(A1, A0);
scale.set_scale(460.757);
scale.tare();
chrono=minute();
pinMode(LED_BUILTIN, OUTPUT);
digitalWrite(LED_BUILTIN, HIGH); // turn the LED on (HIGH is the voltage level)
delay(1000); // wait for a second
digitalWrite(LED_BUILTIN, LOW); // turn the LED off by making the voltage LOW
delay(1000); // wait for a second
}
void loop()
{
if(f_wdt == 1)
{
if (chrono!=minute())
{
chrono =minute(); tempo ++;
if (DEBUG) {Serial.print("tempo: ");Serial.println (tempo);}
}
if (tempo >= PERIODE)
{
tempo=0;
payload.data.id=139;//idx du capteur virtuel dans domoticz
payload.data.temperature = int16_t (dht.readTemperature()*10);
payload.data.humidity = int16_t (dht.readHumidity()*10);
payload.data.weight=int32_t (getweight()*10);
payload.data.vbat= int(analogRead(A3) * (37 / 1023.0));
delay(500);
// On balance
envoieSF();
}
/* Don't forget to clear the flag. */
f_wdt = 0;
/* Re-enter sleep mode. */
enterSleep();
}
}
void print_date ()
{
Serial.print(hour(), DEC);Serial.print(':');
Serial.print(minute(), DEC);Serial.print(':');
Serial.print(second(), DEC);Serial.println();
}
void envoieSF()
{
if (DEBUG) {Serial.println("ENVOIE SF...");}
SigFox.print("AT$SF=");
for (byte i = 0; i < sizeof(payload); i++)
{
if (payload.rawData[i] <= 0xF) SigFox.print("0"); // pour bien avoir 2 caractères
SigFox.print(payload.rawData[i], HEX);
}
SigFox.print("\r");
if (DEBUG) {Serial.println("ENVOIE SF OK !"); }
}
ISR(WDT_vect)
{
if(f_wdt == 0){f_wdt=1;}
//else {Serial.println("WDT Overrun!!!");}
}
void enterSleep(void)
{
set_sleep_mode(SLEEP_MODE_PWR_SAVE);
sleep_enable();delay(100);
/* Now enter sleep mode. */
if (DEBUG) {print_date();Serial.println("SLEEP Mode activated");}
delay(100);
sleep_mode();
/* The program will continue from here after the WDT timeout*/
sleep_disable(); /* First thing to do is disable sleep. */
/* Re-enable the peripherals. */
power_all_enable();delay(100);
setTime(hour(),minute(),second()+8,day(),month(),year());
if (DEBUG) {print_date();Serial.println("SLEEP Mode disactivated");}
}
float getweight(void)
{
scale.power_up();
final=scale.get_units(10), 1;
Serial.println(final);
scale.power_down(); // put the ADC in sleep mode
return final;
}`
exemple avec ton code modifié pour mes besoins
Super votre projet. Ou peut on echanger avec vous?
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.