ili9486 about stm32_graphics_display_drivers

[RobertoBenjami]

Please try the ili9488 driver. According to the datasheet, they are very similar.

[clear-sky]

thank you sir!
it works!
but colors is inverted and can see some vertical and horizontal lines

[clear-sky]

colors is inverted and can see some vertical and horizontal lines
any help?

[RobertoBenjami]

Upload the project here to watch it.
Increase the delay in the IO driver header

[clear-sky]

hi dear roberto
please check your email

[RobertoBenjami]

I checked, it's interesting. Does the display include a touch screen? If so, how many ohms can be measured between LCD_WR and LCD_D7? What kind of microcontroller and what settings is it running? What length of wire is connected? I checked the datasheet of ili9486, it should work fine.

[clear-sky]

1.Does the display include a touch screen?
NO
2.If so, how many ohms can be measured between LCD_WR and LCD_D7?
NOP
3.What kind of microcontroller?
STM32F103RE
4.what settings is it running?
my lcd has part namber Z350IT002
datasheet
http://aitendo3.sakura.ne.jp/aitendo_data/product_img/lcd/tft2/Z350IT002/Z350IT002_aitendo.pdf
i have set r8 instead of r16 base on end of page 7 on this datasheet(hardware set) using google translate

pin setting:
CS C10
RS C11
WR C09
RD C08
RST C12
D0---D07 C00---C07
D08---D15 > GND

5.What length of wire is connected?
LESS THAN 20CM

i tryed another driver based on stm32duino
https://github.com/prenticedavid/MCUFRIEND_kbv
i sent picture quality please check your email

and found another bug
in ili9488.h file
#define ILI9488_ORIENTATION 1
there is no difference between 1 and 3
also there is no difference between 2 and 4

thanks for the time you spent for a beginner