rrskybox / humason Goto Github PK

New open issue as spawned from Issue 14

Hi,

Is there an option in Humason for auto-adjust focus per filter instead of autofocus only on one specific filter (ex. Luminance)?

Thanks.

When I run the program, I get a repeating popup error saying "Observing list hard clear not installed". I see the file in your zip file .dbq. Do I need to install it or copy it somewhere? How do I solve this... Thanks Dale

Re # 1 in Issue 11: Sometimes Read in or load a target such as NGC 2023 for some reason loads the "Sun" instead. I delete it and try again as the workaround. Eventually, it goes away. Wierd.

Hi Rick,

Curious, I do not have dither enabled when guiding but it appears my images shift left and right when using blink in Pixinsight. Do you have a dropbox I can send the images or maybe, I might make a quick video of the behavior. Could your script be forcing a guide shift during the imaging sessions. Let me know if you need any debugging from me.. Maybe, a log could be generated from the script in the future or something.

Thanks

          Just to give a heads up. I also, tried to rebuild the latest code and got this Exception error....

(https://user-images.githubusercontent.com/14363854/218316345-98f9cf4b-03ac-49bb-90ec-59e9dcbcd801.jpg)

Originally posted by @astromiester1 in #3 (comment)

Focus 2 initiates before telescope turned on.

For some reason, focus 2 when selected in devices tab, the sequence trys to focus in open sky where scope is parked before scope connected. Then it fails and connects to scope and trys the sequence without the focus.

There seems to be a 60sec delay between taking images in the script...I then try just using Take series in TSX and it works fine no delay. Any idea ?

Thanks
Dale

Hi Rick, here are some more comments based on lates build..

1. Making changes to parameters on couple of tabs does not save when you close the app. For instance, on the devices tab, the chosen focus method does not save when closed if I select focus3. Defaults back to focus2. Same thing on focus tab if I set exposesure to 8, it defaults back to 5 when I open it again.

2. loop count is 100 and only one filter is present but 200 images are being captured. This might be part of the old filter name issue. At first I think it may have had 2 filters in the name space OSC and NoFilter. Once, I connected to the filter which only has NoFilter, I refreashed Humanson and only one filter was present the NoFilter name. I also had Clear filter set to 1 and focus filter to 0 and LRGB ratio set to one. But, still trys to do 200 images. Maybe, something to do with old filter names to be cleared out.

3. Would be nice to have an abort button on focus tab as I got hung in a loop for some focus runs with 2 and 3 and couldnt get out unless I killed the program.

4. Can there be an option to save the main cameras autodark to a file so it can be selected in Humanson the next time as a file selection so you don't have to travel to scope all the the time for an autodark with the cover and uncover shtick?

5. This is an old one. When you clearly have a target loaded in the plan and is scheduled, when you hit the image forcast its not the object of interest. Instead, its an older target. You have to manually, down arrow to select it.

Not sure if you notices this but I can't launch Humanson when SKYX pro is open..

I noticed if you change targets and make a new plan in HumanOn using Lookup, read In or Load target, Image focast does not show the current target but instead the old one. The only way is to use the current target list in image forcast and scroll down till you see the new target and select it. Thought when you call it from Humanon, it would automaticaly pick that one from the list and not show the old one. Just an FYI

Thanks
Dale
(https://user-images.githubusercontent.com/14363854/219176021-1d0d890c-369d-41b9-a18a-e4c1e9783988.jpg)

Hi,

No publish folder in the latest git.

Tom

          I tried the new build. Unzipped and installed. Now, no message and no gui when trying to open. Weird...

Originally posted by @astromiester1 in #3 (comment)

Hi,

I can't run it on Windows 10. After installation when I try to open it , I can see loading circle for 1-2 seconds and that's all.

I have newest version of Sky X and NET 4.8.0 on my system.

What could be the reason ?

Best Regards
Bioslasher