Comments (19)
Hi siimonc,
I use libmbus with debian-jessie (raspberry pi), this is my setup:
apt-get -y install libtool automake
cd /usr/src
git clone https://github.com/rscada/libmbus.git
cd libmbus
./clean.sh
./build.sh
make install
ln -s /usr/local/lib/libmbus.so.0 /usr/lib/libmbus.so.0
chmod +s /usr/local/bin/mbus*
from libmbus.
hi kamaxeon,
thanks for your inputs! I will update the thread again once I have got back my working laptop.
Regards
from libmbus.
Hi Chen,
without providing any useful information it's harder than necessary to help you.
Regarding to MinGW & msys:
What output did you get (libmbus should work with other versions of automake)?
Regarding to build on Ubuntu:
Please do not use libmbus-0.8.0 this release is nearly 5 years old.
Did you tried the build.sh?
What output did you get?
from libmbus.
Hi Stefan,
I had installed MinGW and msys, added the directories "C:..\MinGW\bin" and "C:..\MinGW\msys\1.0\bin" to both local and system path in environment variables, as I was using a university computer which added some difficulties in having the admin rights. I followed the tutorial from mingw.org closely link here: Getting_Started, there was some confusion and that is to install msys separately in the wiki page which is outdated Link here. It took me some time to read through the comments to find out about this.
I downloaded libmbus-master and extracted it manually and put them in the ..msys\1.0\home folder. I then ran the bat-file in msys, and navigated to the home folder where my extracted libmbus file is located. However, when I typed ./configure, it said something like the file could not be found. (Sorry I do not have the computer with msys with me now, so I could not rerun the code and provide the exact error lines). I realised there are difference in the source code in GitHub master branch and in the 0.8.0 version. As I investigate further, the master-branch is up-to-date, where changes were made from correcting the issues (I really appreaciate the work this community puts in), but how come I am not able to run ./configure in msys bat-file (like the problem I said before where the some files are missing)?
I then downloaded the 0.8.0-version and extracted it in the msys home folder again, but this time using "tar -xf libmbus-0.8.0.tar.gz" and I was able to run ./configure after that. I could see that Makefile.in is produced, but there were errors after that when I ran make and make install, the error was like some library is not defined so there are a whole bunch of variables which are not recognized. If I am not mistaken, it is the one in mbus/mbus-protocol.h. I thought the problem was that I was using automake 1.11 installed from the default MinGW graphical installer. I tried to install 1.12 but to no avail, as the whole msys is rooted to use automake 1.11. I tried to merge the latest version of configure.ac to the configure.ac in 0.8.0 version, which I was able to run ./configure, but it says libltnl.config could not be found. I was really fed up of using msys, and that is when I saw #117 that it MIGHT be better to compile using cygwin. I am quite exhausted to try it in windows again and I thought it will be better to just use ubuntu directly with a VirtualBox. I have read your comments in the issues #42 and #117 and it makes me think that using msys is not the long-term solution.
I am not from programming background but I have some understanding about programming. I just want to use this library to read and analyse the data from Hydrometer Sharky 773, which we bought in the university. Which version of libmbus should I use? I am thinking of the master-branch should be fine but then I am not able to run ./configure with it.
I would really appreciate your help and sorry if it is too long to read. They are my personal encounters with msys and libmbus.
Cheers.
-Chen
from libmbus.
Hi kamaxeon,
thank you, I will try it out if the ubuntu version does not work.
Regards,
-siimonc
from libmbus.
Hi siimonc,
What version of ubuntu are you testing?
Best regards,
from libmbus.
it depends on the IT department of my univeristy, I cant tell you right now. Do you have some advice about Ubuntu?
Regards.
from libmbus.
Hi siimonc,
I've just tried on a ubuntu 16.04 (last LTS) with successfully result, very similar setup (only install make package):
apt-get -y install libtool automake make git
cd /usr/src
git clone https://github.com/rscada/libmbus.git
cd libmbus
./clean.sh
./build.sh
make install
ln -s /usr/local/lib/libmbus.so.0 /usr/lib/libmbus.so.0
chmod +s /usr/local/bin/mbus*
Best regards,
from libmbus.
Hi siimonc,
If you use ansible, here you have an ansible-role (https://galaxy.ansible.com/kamaxeon/libmbus/) for debian and ubuntu :-)
Best regards,
from libmbus.
Hi kamaxeon, @lategoodbye
I can now run Ubuntu 16.04.2 and followed your instructions above to compile the library. It has been good until the step ./build.sh. I could not execute the step ./build.sh and I got the following error message:
...:/usr/src/libmbus$ ./build.sh
Running autotools...
autom4te: cannot create autom4te.cache: No such file or directory
autoheader: '/usr/bin/autom4te' failed with exit status: 1
make: *** No targets specified and no makefile found. Stop.
I suspect there is some modifications needed to be done for configure.ac
Would appreciate any inputs. Thanks!
from libmbus.
Could you please verify that you have also have autoconf and autotools-dev installed?
I've Ubuntu 16.04 and the build.sh script works.
from libmbus.
yes I have had them installed previously. Ran
..:~$ sudo apt-get install autotools-dev
[sudo] password for siimonc:
Reading package lists... Done
Building dependency tree
Reading state information... Done
autotools-dev is already the newest version (20150820.1).
autotools-dev set to manually installed.
0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
..:~$ sudo apt-get install autoconf
Reading package lists... Done
Building dependency tree
Reading state information... Done
autoconf is already the newest version (2.69-9).
autoconf set to manually installed.
0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
the error message for autom4te.cache is still the same,
..:/usr/src/libmbus$ ./build.sh
Running autotools...
**autom4te: cannot create autom4te.cache: No such file or directory**
autoheader: '/usr/bin/autom4te' failed with exit status: 1
make: *** No targets specified and no makefile found. Stop.
any help would be great, thanks!
-siimonc
from libmbus.
I have solved the problem, I didnt have the permission to that directory and adding a sudo infront of ./build.sh solved the problem.
Thanks!
-siimonc
from libmbus.
Hi,
I was able to build libmbus on windows without problems. Cygwin is right tool for this task. Some extra packages needed to be installed. I'm sending what "cygcheck -c" returns. Not all of these packages are necessary to build library, but better to put everything here so you can see full working setup.
$ cygcheck -c
Cygwin Package Information
Package Version Status
_autorebase 001006-1 OK
alternatives 1.3.30c-10 OK
autoconf 13-1 OK
autoconf-archive 2017.09.28-1 OK
autoconf2.1 2.13-12 OK
autoconf2.5 2.69-3 OK
automake 10-1 OK
automake1.10 1.10.3-3 OK
automake1.11 1.11.6-3 OK
automake1.12 1.12.6-3 OK
automake1.13 1.13.4-2 OK
automake1.14 1.14.1-3 OK
automake1.15 1.15.1-1 OK
automake1.4 1.4p6-11 OK
automake1.5 1.5-11 OK
automake1.6 1.6.3-12 OK
automake1.7 1.7.9-11 OK
automake1.8 1.8.5-11 OK
automake1.9 1.9.6-11 OK
base-cygwin 3.8-1 OK
base-files 4.2-4 OK
bash 4.4.12-3 OK
binutils 2.29-1 OK
bzip2 1.0.6-3 OK
ca-certificates 2.16-1 OK
coreutils 8.26-2 OK
csih 0.9.9-1 OK
cygrunsrv 1.62-1 OK
cygutils 1.4.16-2 OK
cygwin 2.9.0-3 OK
cygwin-debuginfo 2.9.0-3 OK
cygwin-devel 2.9.0-3 OK
cygwin32-libtool 2.4.6-3 OK
dash 0.5.9.1-1 OK
diffutils 3.5-2 OK
editrights 1.03-1 OK
file 5.30-1 OK
findutils 4.6.0-1 OK
gawk 4.2.0-1 OK
gcc-core 6.4.0-4 OK
gcc-g++ 6.4.0-4 OK
gcc-tools-epoch1-autoconf 2.59-2 OK
gcc-tools-epoch1-automake 1.9.6-2 OK
gcc-tools-epoch2-autoconf 2.64-2 OK
gcc-tools-epoch2-automake 1.11.6-1 OK
getent 2.18.90-4 OK
git 2.15.1-1 OK
grep 3.0-2 OK
groff 1.22.3-1 OK
gzip 1.8-1 OK
hostname 3.13-1 OK
info 6.5-2 OK
ipc-utils 1.0-2 OK
less 487-1 OK
libargp 20110921-3 OK
libatomic1 6.4.0-4 OK
libattr1 2.4.46-1 OK
libblkid1 2.25.2-2 OK
libbz2_1 1.0.6-3 OK
libcom_err2 1.42.12-2 OK
libcrypt0 2.1-1 OK
libcurl4 7.56.1-1 OK
libdb5.3 5.3.28-2 OK
libedit0 20130712-1 OK
libexpat1 2.2.3-1 OK
libffi6 3.2.1-2 OK
libgc1 7.6.0-1 OK
libgcc1 6.4.0-4 OK
libgdbm4 1.12-1 OK
libgmp10 6.1.2-1 OK
libgomp1 6.4.0-4 OK
libgssapi_krb5_2 1.15.2-1 OK
libguile17 1.8.8-3 OK
libguile2.0_22 2.0.14-1 OK
libiconv 1.14-3 OK
libiconv2 1.14-3 OK
libidn2_0 2.0.4-1 OK
libintl8 0.19.8.1-2 OK
libisl13 0.14.1-1 OK
libisl15 0.16.1-1 OK
libk5crypto3 1.15.2-1 OK
libkrb5_3 1.15.2-1 OK
libkrb5support0 1.15.2-1 OK
libltdl7 2.4.6-5 OK
liblzma5 5.2.3-1 OK
libmpc3 1.0.3-1 OK
libmpfr4 3.1.6-1p1 OK
libncursesw10 6.0-12.20171125 OK
libnghttp2_14 1.23.1-1 OK
libopenldap2_4_2 2.4.42-1 OK
libopenssl100 1.0.2m-1 OK
libp11-kit0 0.23.5-1 OK
libpcre1 8.40-3 OK
libpipeline1 1.4.0-1 OK
libpopt-common 1.16-2 OK
libpopt0 1.16-2 OK
libpsl5 0.18.0-1 OK
libquadmath0 6.4.0-4 OK
libreadline7 7.0.3-3 OK
libsasl2_3 2.1.26-11 OK
libsigsegv2 2.10-2 OK
libsmartcols1 2.25.2-2 OK
libssh2_1 1.7.0-1 OK
libssp0 6.4.0-4 OK
libstdc++6 6.4.0-4 OK
libtasn1_6 4.12-1 OK
libtool 2.4.6-5 OK
libtool-debuginfo 2.4.6-5 OK
libunistring2 0.9.6-1 OK
libuuid1 2.25.2-2 OK
login 1.11-1 OK
m4 1.4.18-1 OK
make 4.2.1-2 OK
man-db 2.7.5-2 OK
mintty 2.8.1-0 OK
ncurses 6.0-12.20171125 OK
openssh 7.6p1-1 OK
openssl 1.0.2m-1 OK
p11-kit 0.23.5-1 OK
p11-kit-trust 0.23.5-1 OK
perl 5.26.1-1 OK
perl-Capture-Tiny 0.46-2 OK
perl-Carp 1.38-2 OK
perl-Config-AutoConf 0.315-2 OK
perl-Error 0.17025-2 OK
perl-ExtUtils-Config 0.008-3 OK
perl-ExtUtils-Helpers 0.026-2 OK
perl-ExtUtils-InstallPaths 0.011-3 OK
perl-inc-latest 0.500-2 OK
perl-Module-Build 0.4224-2 OK
perl-Module-Build-Tiny 0.039-3 OK
perl-Module-Implementation 0.09-2 OK
perl-Module-Metadata 1.000033-2 OK
perl-Module-Pluggable 5.2-2 OK
perl-Module-Runtime 0.016-1 OK
perl-Module-ScanDeps 1.24-2 OK
perl-Module-Signature 0.81-2 OK
perl-PAR-Dist 0.49-4 OK
perl-Pod-Simple 3.35-2 OK
perl-Sub-Identify 0.14-2 OK
perl-SUPER 1.20141117-2 OK
perl-TermReadKey 2.37-2 OK
perl-Test-Harness 3.39-2 OK
perl-Test-MockModule 0.13-1 OK
perl-Try-Tiny 0.28-2 OK
perl-Unicode-Normalize 1.25-2 OK
perl_autorebase 5.26.1-1 OK
perl_base 5.26.1-1 OK
publicsuffix-list-dafsa 20171028-1 OK
rebase 4.4.2-1 OK
rsync 3.1.2-1 OK
run 1.3.4-2 OK
sed 4.4-1 OK
tar 1.29-1 OK
terminfo 6.0-12.20171125 OK
texinfo 6.5-2 OK
tzcode 2017c-1 OK
tzdata 2017c-1 OK
util-linux 2.25.2-2 OK
vim-minimal 8.0.1376-1 OK
w32api-headers 5.0.3-1 OK
w32api-runtime 5.0.3-1 OK
which 2.20-2 OK
windows-default-manifest 6.4-1 OK
xz 5.2.3-1 OK
zlib0 1.2.11-1 OK
To build library just type
./clean.sh
./build.sh
make install
from libmbus.
I currently try to build a nodejs native module with libmbus and therefor also I also try to get it compile and working on Windows ... TCP is already working ... Serial is next.
And I focussed on the lib itself for now ... so binaries are still "untouched".
But I could need support to create the needed msvc makefiles and such ... So if someone wants to join with msvc or at all "compiler know how" (because I'm not really the C/C++ guy) ... contact me ([email protected]).
Current (more experimental) WIP status: https://github.com/Apollon77/libmbus/tree/build-windows
from libmbus.
Got serial and tcp working on windows and also release a first version of the nodejs native library to npm based on
https://github.com/Apollon77/libmbus/tree/build-windows
Still a lot of work to do in order to create a PR :-) na yhelp would be great!
from libmbus.
سلام siimonc ،
من از libmbus با debian-jessie (تمشک پی) استفاده می کنم ، این تنظیمات من است:
apt-get -y نصب libtool automake
cd / usr / src
git clone https://github.com/rscada/libmbus.git
cd libmbus
./clean.sh
./build.sh
نصب
ln -s / usr / local / lib / libmbus.so.0 /usr/lib/libmbus.so.0
chmod + s / usr / local / bin / mbus *
lategoodbye
من این مشکل را برطرف کردم ، من مجوز آن فهرست را نداشتم و با اضافه کردن یک sudo در مقابل ./build.sh مشکل را حل کردم.
با تشکر!
-siimonc
Hello, help me, I got a headache, how to install the serial driver on Ubuntu
from libmbus.
Cygwin Package Information
Hello, can you simply explain what I should do in Windows or Ubuntu?
from libmbus.
سریال و tcp روی ویندوز کار می کند و همچنین اولین نسخه از کتابخانه بومی nodejs را بر اساس https://github.com/Apollon77/libmbus/tree/build-windows به npm منتشر می
کنیدهنوز کارهای زیادی برای ایجاد یک روابط عمومی انجام می شود :-) na yhelp بسیار عالی خواهد بود!
Hello, should this be done inside Visual Studio?
from libmbus.
Related Issues (20)
- ./build.sh Failure HOT 1
- m.bus Adapter - Current Unrecognized VIF extension: 0x3a - Stromzähler B+G Tech SDM 630 V2 HOT 4
- Cannot find or read devices because of timeouts HOT 5
- Mbus clarification HOT 3
- Finding EMU meters via mbus-tcp-scan-secondary
- Value resolution
- Negative values start with F HOT 4
- rs485 to usb converter and libmbus?
- Documentation not accesible HOT 2
- Decoding frame data
- Add manufactorer specific VIFE infos in (XML) response
- Feature Request: Eastron-SDM-Serie: instantaneous electrical information HOT 5
- Sending different init frames to a slave... HOT 2
- I'm trying to get data from mbus tc, it doesn't find any results when I scan
- Received invalid M-Bus response frame HOT 1
- IPv6 does not work HOT 4
- Pollucom E- reduced / unexpected answer?
- IME Electrical meter support HOT 2
- libmbus problem in python-script HOT 2
- Debian packaging fork HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from libmbus.