make_weathercubetwo

This make project displays weather information on a Tinkerforge LCD 20x4 display build in a MakerBeam cube.

Introduction

WeatherCubeTwo is the next development level based on WeatherCubeOne.
Completely rewritten using MQTT - the new solution is much simpler then the previous - No need for complex JavaObjects / Inline Java / HTTPJobs as subscribe and publish messages handles the flow of data.
It also enables to build UI clients, e.g. for B4J and B4A with almost the same code.
The Tinkerforge MQTT topics published, are converted and displayed on the Tinkerforge LCD20x4 display and published to the Domoticz Server.

For more information, read the detailed description, the readme.txt or the project source code.
The source code is well documented with hints on how to install MQTT and use with B4J, Lazarus or any other MQTT clients.

Note The project has been renamed to WeatherCubeTwo but this documentation still uses project name WeatherCubeOne2.

Functionality

Display Date & Time, Air Pressure, Temperature and Humidity on a Tinkerforge LCD 20x4 display and on a Domoticz Client Browser.
Display Trend (Arrow Up / Down) via Custom Characters
LCD 20x4 Display buttons function:1 = Backlight On; 2 = Backlight Off; 3 = Show Version Info; 4 = Shutdown the Cube.
To obtain information send from the Tinkerforge Bricklets subscribe to the topics: weathercubeone/airpressure, weathercubeone/timestamp, weathercubeone/temperature or weathercubeone/humidity.
To trigger an action on the WeatherCubeOne, following topics can be published: weathercubeone/backlighton, weathercubeone/backlightoff, weathercubeone/clear, weathercubeone/copyright, weathercubeone/close, weathercubeone/shutdown.
Enables clients like B4J UI (example included), B4A (not ready), Lazarus UI (example included)
But also any other MQTT client (Windows, Android, Apple) or own developments
Improved Raspberry Pi memory usage
Example Google Line Charts Temperature, Airpressure, Humidity updated via B4J server using MQTT
Using Tinkerforge Brick MQTT Proxy, B4X MQTT Client Library, Domoticz MQTT

Hardware

Raspberry Pi 2 Model B v1.1
Tinkerforge Master Brick (connected to the Raspberry Pi), Bricklets Temperature, Barometer, Humidity and LCD20x4

Software

Tinkerforge Brick MQTT Proxy
B4X jMQTT Client Library
Domoticz MQTT
Domoticz Home Automation Server
Software B4J Application WeatherCubeOne2 & WeatherCubeOneGoogleChart

Java License

The application has been created for personal use only.

MQTT Components

Tinkerforge Brick MQTT Proxy
B4X jMQTT Client Library
Domoticz MQTT Broker

Notes

MQTT

As MQTT is used, it is possible to subscribe or publish to the Tinkerforge Master Brick or Bricklets or Domoticz topics.
The payload has to be parsed with JSON. See the examples B4J & Lazarus MQTT client.
To obtain information send from the Tinkerforge Bricklets subscribe to the Topics:

weathercubeone/airpressure, weathercubeone/timestamp, weathercubeone/temperature or weathercubeone/humidity.

To trigger an action on the WeatherCubeOne, following Topics can be published:

weathercubeone/backlighton, weathercubeone/backlightoff, weathercubeone/clear, weathercubeone/copyright, weathercubeone/close, weathercubeone/shutdown.

Any MQTT can be used to do so. To note is that there are additional topics possible to direct subscribe or publish to the TinkerForge Master Brick or Bricklets.
The same applies for Domoticz. To use these JSON is required. To read more see the references listed below.

Autostart Tinkerforge MQTT Broker and B4J weathercubeone jar application

Autostart on the Raspberry Pi the Tinkerforge MQTT Broker and B4J weathercubeone.jar application Add to /etc/rc.local:

  #TinkerForge Brick MQTT Proxy
  cd /home/pi/tinkerforge/mqtt 
  #
  #python brick-mqtt-proxy.py&
  #Default interval is 3 seconds, change to 1 min by setting to 60
  python brick-mqtt-proxy.py --update-interval 60 &
  printf "TinkerForge Brick MQTT Proxy started"

  # WeatherCubeOne
  cd /home/pi/weathercubeone
  /usr/bin/java -jar weathercubeone.jar &

  exit 0

Domoticz Switch showing Copyright

Create an executable script

cd /home/pi/weathercubeone
sudo nano script_copyright

Content of the Script:

#!/bin/bash
# Script to show copyright message on weathercubeone
echo "WeatherCubeOne show copyright..."
mosquitto_pub -h localhost -t weathercubeone/copyright -m ""

Make the Script executable.

sudo chmod 755 script_copyright

Create a Switch in Domoticz

To show the copyright on the LCD display, create a new Virtual Switch (Dummy hardware). Edit the Switch widget and define as action:

script:///home/pi/weathercubeone/script_copyright

Subscribe to all Topics

Source Code

The source code and required libraries can be found in archive weathercubeone2.zip.
The code is well documented.

rwbl / make-weathercubetwo Goto Github PK