sayeh-1337 / xilinx-serial-miner Goto Github PK
View Code? Open in Web Editor NEWThis project forked from teknohog/xilinx-serial-miner
Bitcoin miner for Xilinx FPGAs
License: GNU General Public License v3.0
This project forked from teknohog/xilinx-serial-miner
Bitcoin miner for Xilinx FPGAs
License: GNU General Public License v3.0
Xilinx Serial Miner ------------------- by Risto A. Paju, teknohog at iki.fi This project is no longer being updated. For newer and more capable versions of the Bitcoin miner, proceed to https://github.com/teknohog/Open-Source-FPGA-Bitcoin-Miner instead. The corresponding project there is Verilog_Xilinx_Port. ------------------- This is a port of fpgaminer's https://github.com/progranism/Open-Source-FPGA-Bitcoin-Miner to Xilinx chips, using a serial port for communication with the computer. Implementation details ---------------------- I use a Digilent Nexys2 board with a Spartan 3E 500K. This code should probably work on most Xilinx chips. I have set the loop unrolling to minimum (5) by default, decrease this number for bigger chips. In my case the LUT utilization is about 60%. The 7-segment display is used to indicate a golden nonce. (Raw bytes, not legible numbers, but usable for a bitwise debug :) The altpll part in the original code is replaced by the Xilinx equivalent, DCM. It was generated in Xilinx ISE, and it may be necessary to generate new ones for different devices. This was the simplest DCM with only the minimum of controls and outputs. The serial communication is a simple and direct replacement of the original. Midstate and data2 are pushed onto the registers in a single packet. The FPGA only sends data back when it finds a golden nonce. The timeout for serial port reads is rather conveniently used like 'askrate' in other miners, to signal when new work is needed. Clock doubler ------------- A DCM can easily multiply the clock rate for faster mining, but it may be unstable. In my case, the base clock is 50 MHz and the synthesis tools give a timing limit of about 70 MHz (13 ns). Nevertheless, it seems to work fine so far. My error rate so far seems very low, so even if the doubled clock is to blame, the net effect is positive. Heat could be a serious issue on larger FPGAs. This Spartan 3E 500K is slightly warm to touch with the doubled clock, compared to no noticeable warming with the single clock. The code to use this is already included and commented out, not enabled by default. To enable it, you should have these lines uncommented in fpgaminer_top.v: `include "main_pll_2x.v" (instead of main.pll.v) main_pll pll_blk (.CLKIN_IN(osc_clk), .CLK2X_OUT(hash_clk)); (instead of the one with .CLK0_OUT) Also, since hash_clk is used by everything including the serial port, you need to change the frequency in async_*.v to the doubled value. Usage ----- 1. Download the RS232 code from http://www.fpga4fun.com/files/async.zip and unzip it into sources/hdl to go with the other files. Change the clock frequency definition in both files to suit your oscillator. Note that this async code is not free software, and it cannot be redistributed without a permission from fpga4fun. (I have discussed this with the author of fpga4fun, and he has OK'd this kind of linking. However, it might be more convenient in the future to have our own serial code here.) 2. Build the design and program the FPGA. At the moment, the source is treated as the single fpgaminer_top file, using includes. Here are some ways I have used succesfully, you can of course use Xilinx ISE or something else: 2a. boldport: $ make -f scripts/Makefile TOP_PATH=`pwd` bit This builds a bit file for a Spartan 3E 500K. To generate a suitable Makefile for other FPGAs, see https://www.boldport.com/. 2b. Nexys2prog and its associated build script: http://ixo-jtag.sourceforge.net/nexys2-linux-howto.html 3. Edit your details such as username and serial port in miner.py, and start mining. It requires a few non-standard libraries, pyserial and json-rpc. http://pyserial.sourceforge.net/ (also generally available in Linux distributions) http://json-rpc.org/wiki/python-json-rpc Todo ---- * Some error checking and resetting features. For example, if we happen to send one extra byte into the FPGA, the registers will stay out of sync basically until it is reconfigured. * Feedback on actual hashing rate. For example, a signal could be sent whenever the nonce hits certain milestones, and the script could figure out the rate. Release notes ------------- 2011-07-14 * 7-segment display is now enabled by the nearest slide switch (SW0), to reduce the amount of unnecessary lighting. 2011-06-20 * Moved to Github * Introduced boldport as an optional build system, thanks to Saar Drimer. 2011-06-08 * Threaded miner.py that should reduce the incidence of stale blocks, particularly with faster FPGAs. 2011-06-05 * Optional statistics in miner.py * Clock doubler available but not enabled by default * Removed LED indicators, 7-segment display remains 2011-06-04 This is the first release on 2011-06-04. I got my first FPGA board on 2011-05-13 and I have been learning these things between a day job and other intense hobbies. So bear with my newbie bugs, and please send in hints and corrections.
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.