shden / mercury236 Goto Github PK

Is it possible to adapt the module for mercury-230?
And is it possible to adapt the module when connecting to the electricity meter via IP: Port?

Добрый день. К сожалению скрипт не заработал, помогите выяснить почему.. Меркурий 236, адаптер меркурий 221, через ЮСБ на винде с родным конфигуратором все работает. На этом скрипте нули(
./mercury236 /dev/ttyUSB0 --debug
Sent bytes: 4
00 00 01 B0
Received bytes: 4
00 00 01 B0
Sent bytes: 11
00 01 01 01 01 01 01 01 01 77 81
Received bytes: 11
00 01 01 01 01 01 01 01 01 77 81
Sent bytes: 4
00 02 80 71
Received bytes: 4
00 02 80 71
Mains status: On
Voltage (V): 0.00 0.00 0.00
Current (A): 0.00 0.00 0.00
Cos(f): 0.00 0.00 0.00 ( 0.00)
Frequency (Hz): 0.00
Phase angles (deg): 0.00 0.00 0.00
Active power (W): 0.00 0.00 0.00 ( 0.00)
Reactive power (VA): 0.00 0.00 0.00 ( 0.00)
Total consumed, all tariffs (KW): 0.00
including day tariff (KW): 0.00
including night tariff (KW): 0.00
Yesterday consumed (KW): 0.00
Today consumed (KW): 0.00

Please add information about copyrights/license to use.

Small port for OpenWrt package here - https://github.com/ZigFisher/Glutinium/tree/master/mercury236

Good afternoon !

I had a single-phase counter Mercury-206.
Is there any desire to adapt the program for it or make a branch?
Ready to provide any information and access to it.

Thank you !

More discussion (russian lang) here - https://www.ab-log.ru/forum/viewtopic.php?f=1&t=714&p=33639