silver13 / eachine-e011 Goto Github PK

Hi,
Is it works with E010 ?

thanks

Hi,

first, thank you very much for this great project 👍

I've build a bwhoop.hex file with gcc (using Travis-CI), but to my surprise, the final .HEX file is 43kByte, instead of 33kByte you provide in bin folder.
Any idea, why there is such a huge difference? (and yes, my compiled version flies ;-) )

Background information:
I've forked it and using now Travis-CI as build agent (see my changes in travis.yml to automatically export .hex file).

Output

arm-none-eabi-size bwhoop.elf
   text	   data	    bss	    dec	    hex	filename
  15236	    128	   2832	  18196	   4714	bwhoop.elf
arm-none-eabi-objcopy -O binary bwhoop.elf bwhoop
arm-none-eabi-objcopy -O ihex bwhoop.elf bwhoop.hex

Regards
Martin

Hi everyone. Went through 2 boards 011. Now none of them reacts to the gas stick. In this case, all commands pass what the LEDs indicate. What am I doing wrong? Thank you in advance.

its support for jjrc h67,
i was success upload but can't bind and just blink 4 times

Hi silver13, do you already know about E011 new board that now replacing all E011 quad? I've got a new board 2 weeks ago, trying to flash, but cannot do the flashing. Afraid that developer block this new board to be flashed. Hope that you can find how to solve this.

Thanks

what acro program can use silvervise that can connect to android?
How to

telemetry silvervise can not connect eachine e011
how to be able to connect

Hi,
could you give some instructions on how to flash back the original firmware from the .bin file, please? Prefferably on windows, I can't find a way how to do it anywhere.

Also this is probably just a fault of my piece but I can't get working any dual FW, just notfastenuf's acro only (hence the request for stock). Have you ran into something like this before?

Thanks for your time

Hi silver13, is there any possibility to have OSD on e011?

Thanks

Work on eachine e013?

Hi silver13, is it possible to have buzzer function on off with channel like brushless drone? So the buzzer will sound if we activate the channel and if in lowbat condition and lost connection (this is already done now) ?

Thanks

I try to active bayang_ble_app for telemetry, i change my_quad_name and my_quad_id, after i try to build the project, there's always come with 1 warning in line 1168 :

src\rx_bayang_ble_app.c(1168): warning: #68-D: integer conversion resulted in a change of sign
if ( temp > 1000 && ( temp - (PACKET_OFFSET) )/((int) PACKET_PERIOD) >= (skipchannel + 1) )

#define USE_STOCK_TX was active on config.h
so the PACKET_OFFSET value change from 250 to -250

how to fix this?

Thanks

Hi,

I'm trying to implement some "comfort" feature like I'm used to from my bigger drones.
May I ask you to explain the core concept of how rx[] buffer and main control loop interacts?

Background:
I would like to switch LEVEL vs. ACRO mode via MODE switch at my DEVO 7e.
Additionally, I would like to make an option for "ARMING" in ACRO mode, which includes motor spinning when idle.

My first humble approach looks like this
nitram509@dad26bd

In Keil uVision Debugger I've figured out, that when I switch my radio knob and hit the breakpoint at line
156: if (aux[CH_FLIP] && rx[THROTTLE] < 0.05f) ...
... the rx[THROTTLE] value is 0.0 - even if my radio is full throttle.

This line should prevent ARMING, when full throttle.
But unfortunately, in real life, drone is armed even with full throttle :/
I'm puzzled, how can this happen?

Any help is appreciated.

Regards
Martin

I've been troubleshooting it for quite some time now, but the issue persists. After a crash, head down, it won't bind no matters what I do.

I've tried to bind it with a stock transmitter, and a multi protocol plugged in my Flysky transmitter.
I also flashed the regular, acro only, and factory firmware. Nothing worked.

I appreciate any help. Thanks in advance.