smealum / udsploit

nwm:UDS exploit + kernel hooks for 11.3

udsploit

nwm:UDS exploit + kernel hooks for 11.3

credit

nwm:UDS bug discovered by yellows8 (mid 2016) all code here written by smea (early 2017)

udsploit's Issues

Error? C9411002?

When running udsploit I get this instead of it completing as I've seen for others.

udsploit: srvGetServiceHandle
udsploit: srvGetServiceHandle
udsploit: allocHeapWithPa
allocate linear buffer as big as target buffer
figure out how much memory is available
0531D000
allocate placeholder to cover all free memory
free linear block
allocate regular heap to replace it
free placeholder memory
udsploit: sharedmem_la 16000000
udsploit: svcCreateMemoryBlock
udsploit: NDM_EbterExclusiveState
udsploit: UDS_InitializeWithVersion
C9411002

File Drop?

is it possible to release this as a .zip? my computer wont download the .3dsx

Will udsploit transfer to 11.4 and 11.5?

Hi,

I was just wondering if the author had any intention of trying to put the exploit on 11.4 and 11.5.

Thank you for your time

Edit:

I didn't see the issue below me i'm very sorry

11.4 FIRMWARE??!!!

I've updated my DS to the Firmware 11.4.0-37E but can't hack now +can't go to Nintendo 3DS Sound for importing my saves.I have to refresh my otherapp.bin because of my newest Firmware Version but there where the 4 ist there is no 4 available just 1,2 and 3.
What do I do now can't I hack anymore?

does nothing when launched

When launching udsploit it just shows two lines and stays there. Am I missing something? Do I just need to let it sit? The lines that appear are:

udsploi: srvGetServiceHandle
D8E06406

Probs an error?

udsploit: srvGetServiceHandle
udsploit: srvGetServiceHandle
udsploit: allocHeapWithPa
allocate linear buffer as big as target buffer figure out how much memory is available
0171D000
allocate placeholder to cover all free memory
free linear block
allocate regular heap to replace it
free placeholder memory
udsploit: sharedmem_la 16000000
udsploit: svcCreateMemoryBlock
udsploit: NDM_EnterExclusiveState
udsploit: UDS_InitializeWithVersion

How to replicate: Have a Burned WiFi Board 3DS, execute HBL thru Soundhax in 11.2 U, have the Wireless deactivated. In HBL activate the wireless and inmediatly open udsploit.

I can't afford another 3DS Wifi board cuz im Venezuelan and that thing its stupidly expensive here, so what can i do? sorry for my bad english.

UDSploit cannot exploit some firmwares older than 11.3

Such as "O3DS Beginner Version" in Taiwan/HongKong - which has 9.7.0-??J with NO Internet access except FW upgrade.
In these cases, Fasthax works but UDSploit doesn't.
So I believe it's an incompatibility of UDSploit.

11.6

Hey can someone make this work on 11.6 because i need it badly.

udsploit hangs after patching kernel - help?

I have a New 3DS XL running 11.2.0-35U. I've run the Homebrew Launcher using soundhax. After running udsploit from the Homebrew Launcher, it does a bunch of things that scroll by quickly and hangs here:

udsploit: sharedmem_la 16000000
udsploit: svcCreateMemoryBlock
udsploit: NDM_EnterExclusiveState
udsploit: UDS_InitializeWithVersion
udsploit: NDM_LeaveExclusiveState
udsploit: UDS_Bind
00005544 00000FF0 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
udsploit: UDS_Unbind
00000000
udsploit success
found svc_stuff 000021F0 0000230C 0000226C
found svc_0x30_offset 00004E20
patching kernel... done !
00000000

At this point it hangs indefinitely (I let it sit overnight to be sure) with 100% reproducability. Any ideas?

Red Screen on Launch

Hi, I've seen that a couple other people have had a similar issue. I'm using a New 3DS XL running 11.3.0-36U and attempting to launch udsploit.3dsx through Homebrew. I've been following the 3ds.guide website and I actually went through the process and it worked perfectly for my old 3DS running 11.2. However, when trying to do the same thing with my New 3DS running a slightly newer version, it doesn't seem to work. Every time I try to run the udsploit application through the Homebrew Launcher, I get a red screen on the bottom and either a frozen screen or a black screen on top. I've tried turning it off and back on multiple times, I've tried formatting my microSD and starting from scratch, I've tried waiting for it to tell me that an update is available and then ignoring the message so that I don't update to 11.4, but none of it seems to be working. I saw in a different thread that you had mentioned that you had patched this issue. However, whenever I follow the link on the 3ds.guide website, it takes me to version 1.0, which it says was released on Feb 11. Another thing that I noticed is that when I downloaded safehax, there was a .smdh file in addition to the .3dsx file. When I copied this file to my \3ds folder, then an actual icon showed up instead of the question mark I see for the udsploit. I feel that the issue is that the Homebrew Launcher isn't recognizing it as a full application. I have attached a picture of this to this. Is it possible for you to link me to the proper .3dsx file or to look into this issue further? Thanks!

HOW DO I MUST INSTALL THIS!!!11!!!!!!11!!11!!!!!!11111!!

Really, how?

An exception occurred when executed

executing udsploit from homebrew menu make this screen appear.

did not happen when I was installing b9s (11.3.0) but it happens now.

homebrew launcher 2.0.0, system 11.4.0-33K, b9s 1.3, luma 8.0

what could have gone wrong?

Red Screen

When I'm trying to load the udsploit on the home-brew launcher it gets stuck on a red screen, i've tried several times rebooting the console and trying again but it keeps getting frozen on the screen, what can i do about it?

How do i compile?

Title

red screen on bottom after pressing start

i have no idea when this thing finishes.
This is what shows up on my screen before i press start, ive tried waiting for 5 min with nothing changing:

Error C920181A after 'udsploit: UDS_Unbind'

What should I do to make it work?

erreur c920181a after uds_uhbind

hello erreur c920181a after uds_uhbind i m 11.5.2

udsploit question mark homebrew

when i load the homebrew i get a red screen below and a black screen on top
also in the homebrew menu udsploit has a ds with a question mark on it.
help please
New 3ds XL Ver. 11.2.0-35E

updates for fw v1.4/1.5 ?

title says it!, for rpghax vr homebrew..
should be all that was for v11.3

TiniVi/safehax#36

on list https://3ds.guide/homebrew-launcher-(soundhax).html , est

Hello question

I don't know who to ask this about but every time I go on to the Homebrew launcher to use the Httpwn I'm on 11.30 cfw and when I Press start and then X it gives me a Error has occurred please save your data in any software currently in use then restart the system just was wondering if you know anything about this?

Red screen when launching

when I try to launch this it gets blocked into a red screen, I have a old 3ds XL version 11.3.0 - 36E