spacehuhn / arduinoarpspoof Goto Github PK
View Code? Open in Web Editor NEWKicks out everyone in your LAN via with an enc28j60 ethernet controller and Arduino.
License: MIT License
Kicks out everyone in your LAN via with an enc28j60 ethernet controller and Arduino.
License: MIT License
Hi guys,
I followed the guide. I connected the Arduino and the ethernet shield. I installed ethercard on my pc.
I uploaded the code to my Arduino. I plugged the ethernet cable in my shield and in my router and connected the arduino's power.
but still it doesn't work for some reason.
please help.
This project is excellent, maybe, can I start a DoS flood attack via 'nano+enc28j60'?
Can you give me some advice?
Thank you.
I believe this is due to the 8 bit nature of the micro controller i have tried unsigned long to store the value but that does not work either.
Maybe a loop count would work suchas, when arp_count = 65536 add 1 too the loop count then when echoing arp_count add the current count + loop count * 65535.
Sketch uses 11404 bytes (37%) of program storage space. Maximum is 30720 bytes.
Global variables use 584 bytes (28%) of dynamic memory, leaving 1464 bytes for local variables. Maximum is 2048 bytes.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x06
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x06
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x06
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x06
avrdude: stk500_recv(): programmer is not responding
Problem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x06
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x06
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x06
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x06
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x06
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x06
Hi i am mostly new to arduino and this is my first real "project". I have purchased an arduino nano and an Ethernet shield, however when i try to upload the sketch it says error compiling for board arduino nano. my arduino is most likely fake, (since i got it for £2) yet i can successfully upload the "blink" example without any issues.
The fake board has an ATmega328 chip on it and CH340G on the bottom.
The error message says:
Arduino: 1.8.2 (Windows 10), Board: "Arduino Nano, ATmega328"
A:\programs\arduino\arduino-builder -dump-prefs -logger=machine -hardware A:\programs\arduino\hardware -tools A:\programs\arduino\tools-builder -tools A:\programs\arduino\hardware\tools\avr -built-in-libraries A:\programs\arduino\libraries -libraries A:\Arduino\libraries -fqbn=arduino:avr:nano:cpu=atmega328 -ide-version=10802 -build-path C:\Users\COLEFO1\AppData\Local\Temp\arduino_build_461032 -warnings=none -build-cache C:\Users\COLEFO1\AppData\Local\Temp\arduino_cache_920256 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avr-gcc.path=A:\programs\arduino\hardware\tools\avr -prefs=runtime.tools.arduinoOTA.path=A:\programs\arduino\hardware\tools\avr -prefs=runtime.tools.avrdude.path=A:\programs\arduino\hardware\tools\avr -verbose C:\Users\cole foster\Documents\my documents\cole foster\ArduinoARPspoof-master\ARPspoofer\ARPspoofer.ino
A:\programs\arduino\arduino-builder -compile -logger=machine -hardware A:\programs\arduino\hardware -tools A:\programs\arduino\tools-builder -tools A:\programs\arduino\hardware\tools\avr -built-in-libraries A:\programs\arduino\libraries -libraries A:\Arduino\libraries -fqbn=arduino:avr:nano:cpu=atmega328 -ide-version=10802 -build-path C:\Users\COLEFO1\AppData\Local\Temp\arduino_build_461032 -warnings=none -build-cache C:\Users\COLEFO1\AppData\Local\Temp\arduino_cache_920256 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avr-gcc.path=A:\programs\arduino\hardware\tools\avr -prefs=runtime.tools.arduinoOTA.path=A:\programs\arduino\hardware\tools\avr -prefs=runtime.tools.avrdude.path=A:\programs\arduino\hardware\tools\avr -verbose C:\Users\cole foster\Documents\my documents\cole foster\ArduinoARPspoof-master\ARPspoofer\ARPspoofer.ino
Using board 'nano' from platform in folder: A:\programs\arduino\hardware\arduino\avr
Using core 'arduino' from platform in folder: A:\programs\arduino\hardware\arduino\avr
Detecting libraries used...
"A:\programs\arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR "-IA:\programs\arduino\hardware\arduino\avr\cores\arduino" "-IA:\programs\arduino\hardware\arduino\avr\variants\eightanaloginputs" "C:\Users\COLEFO1\AppData\Local\Temp\arduino_build_461032\sketch\ARPspoofer.ino.cpp" -o "nul"1\AppData\Local\Temp\arduino_build_461032\sketch\ARPspoofer.ino.cpp" -o "C:\Users\COLEFO~1\AppData\Local\Temp\arduino_build_461032\preproc\ctags_target_for_gcc_minus_e.cpp"
"A:\programs\arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR "-IA:\programs\arduino\hardware\arduino\avr\cores\arduino" "-IA:\programs\arduino\hardware\arduino\avr\variants\eightanaloginputs" "C:\Users\COLEFO
C:\Users\cole foster\Documents\my documents\cole foster\ArduinoARPspoof-master\ARPspoofer\ARPspoofer.ino:8:22: fatal error: enc28j60.h: No such file or directory
#include <enc28j60.h>
^
compilation terminated.
exit status 1
Error compiling for board Arduino Nano.
I don't know if I'm just doing something stupid here or what but I can't get this to upload to the board. Error below.
Sketch uses 5406 bytes (17%) of program storage space. Maximum is 30720 bytes.
Global variables use 759 bytes (37%) of dynamic memory, leaving 1289 bytes for local variables. Maximum is 2048 bytes.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x82
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x82
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x82
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x82
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x82
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x82
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x82
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x82
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x82
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x82
Problem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.
Hello!
First off, thank you again for the 10/10 project and guide.
My friend and I got a totally not knockoff arduino nano, are we are running out of global variable sram, if I understand the term correctly. The nano is from amazon, but seems to check out as the same board as the one dear old seytonic recommended. Is this a noob mistake (probably), or is there something that can be done to troubleshoot this?
Thanks again!
Sketch uses 5508 bytes (38%) of program storage space. Maximum is 14336 bytes. **Global variables use 1061 bytes (103%) of dynamic memory, leaving -37 bytes for local variables. Maximum is 1024 bytes.** Not enough memory; see http://www.arduino.cc/en/Guide/Troubleshooting#size for tips on reducing your footprint. Error compiling for board Arduino Nano.
After verifying and uploading the code to the Arduino Nano, plug it into my router and provide power, nothing happens. Everything is uploaded, the ether-card library is installed and the Ethernet Shield lights flash. The TX and RX LED's don't flash when power is provided, they only flash when the upload is complete. The option for even the web interface isn't showing any results nor assigned an IP address. Not sure what else to do. Anyone know a solution?
i got a message while compiling the code on Arduino IDE.
`#include <SPI.h>
#include <nRF24L01.h>
#include <RF24.h>
#include<Adafruit_SSD1306.h>
const uint64_t pipeIn = 0xE8E8F0F0E1LL; //pipe address must be same with transmitter
RF24 radio(7, 8);
struct MyData {
byte p;
};
MyData data;
void setup()
{
Serial.begin(9600);
radio.begin();
radio.setAutoAck(false);
radio.setDataRate(RF24_250KBPS);
radio.openReadingPipe(1, pipeIn);
radio.startListening();
pinMode(2, OUTPUT);
}
void recvData()
{
if ( radio.available() )
{
radio.read(&data, sizeof(MyData));
if (data.p < 50) {
digitalWrite(2, HIGH);
}
else {
digitalWrite(2, LOW);
}
}
}
void loop()
{
recvData();
Serial.print("Range: ");
Serial.print(data.p);
}
`
exit status 1
Error compiling for board Arduino Nano.
im using nRF24L01 module with arduino nano. please help me....
Hello,
I'm using web_en = true in the code.
I just uploaded the code to my arduino but during the upload process there was no IP printed out in the serial monitor.
How do I get the webpage IP exactly?
**UPDATE:
I changed the baud to 115200 which fixed the problem so now it displays:
ready!
waiting for LAN connection...
But still, how do I get the IP address?**
Much appreciated.
I think it's useful to except some IP adresses from the attack, like your own Computer.
Do I just all ip's(alot) on the internet or is there some way to get the ip of it?
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.