spotlesscoder / smartclocklightunit

SmartClockLightUnit

smartclocklightunit's Issues

Simulate "complex" sunrise

As a user, I want to be woken up by a simulated sunrise.

The complex sunrise method should dim up a set of RGB LEDs constantly over a configureable amount of time, going from a very dim blue to orange and then to warm white. Like shown in this video:
https://www.youtube.com/watch?v=V_gyNQMSs1w

The amount of time until the maximum brightness will be reached should be configureable at runtime.
It should be possible to configure the runtime over MQTT

Make use of lighting unit as ambient light

As a user, I want the light unit to be able to set the RGB color of the lighting unit via MQTT (setting RGB values)

Make use of lighting unit as motion sensor light

As a user, I want the light unit to turn on a set of warm white LEDs automatically if I enter the room if sleep mode (TODO: insert requirement) is not activated and lighting unit is not on already.

Sleep mode

At night, I don't want to be woken up by the lighting unit in case it might turn on accidentally. Once the sleep mode on the Control Unit (see TODO create issue) was turned on, it should not be possible to turn on any light element of the lighting unit.

At morning, before the sunrise simulation (see #1 #2) starts, the control unit should turn off the sleep mode in order to make it work

Simulate "simple" sunrise

As a user, I want to be woken up by a simulated sunrise.

The simple sunrise method should dim up a set of warm white LEDs constantly over a configureable amount of time.

The amount of time until the maximum brightness will be reached should be configureable at runtime.
It should be possible to configure the runtime over MQTT