ssieb / pn7462 Goto Github PK
View Code? Open in Web Editor NEWThis project forked from quanghuynhminh/pn7462
Full HW and SW for pn7462 with more example project
License: Other
This project forked from quanghuynhminh/pn7462
Full HW and SW for pn7462 with more example project
License: Other
============================================================================== NXP Semiconductors PN7462AU FW and SW Examples PN7462AU Customer Demo Board v2.2 v05.07.01 PN7462AU HAL version 4.11.0.2 Readme.txt ============================================================================== Table of Contents _________________ 1 Document Purpose 2 Description of the package 3 Restrictions 4 Configurations 5 Package Contents 6 Mandatory materials (not included) 7 Hardware Configuration 8 Software Configuration 9 Steps to follow 10 List of supported NFC Reader Boards/ICs 1 Document Purpose ================== This document describes the content of the PN7462AU Product Support Package as well, known problems and restrictions. 2 Description of the package ============================ Package contains PN7462 FW, PSP examples and documentation required to start working with PN7462AU. 3 Restrictions ============== - SW examples are prepared and tested to be run on the PN7462B Customer Demo board. 4 Configurations ================ - The Software can be compiled Cortex M0 based PN7462AU from NXP. 5 Package Content ================= - EULA.pdf (EULA - End User License Agreement) - FreeRTOS-License.txt (License agreement of the FreeRTOS component) - Readme.txt (this document) - .\PN7462AU Documentation\... + Folder contains all available documents to work with PN7462AU Customer Demo board and relevant documents for development. - "UM10957 - PN7462AU Door Access User Manual.pdf" - "UM10951 - PN7462AU POS User Manual.pdf" - "UM10915 - PN7462AU PC CCID Reader User Manual.pdf" - "UM10913 - PN7462AU Software User Manual.pdf" - "UM10883 - PN7462AU Quick Start Guide - Customer Board.pdf" - "UM10858 - PN7462AU Hardware user manual.pdf" - "AN11784 - PN7462AU How to integrate RTOS.pdf" - "AN11738 - PN7462AU Contact Application.pdf" - "AN11706 - PN7462AU Antenna design guide.pdf" - "AN11785 - PN7462AU LPCD and Standby mode.pdf" - "AN11868 - PN7462AU - Integration with SWD Downloaders.pdf" - "AN3703 - PN7462AU_IAR_Integration.pdf" - "UM10948 - PN7462 EEPROM Management.pdf" - .\PN7462AU Datasheet\... + Folder contains the PN7462AU and PN736X Datasheet - PN736X.pdf - PN7462.pdf - .\PN7462AU FW and SW Examples\... + Folder contains the PN7462AU FW source code and SW examples provided to support PN7462AU - Keil IDE plugin - IAR IDE plugin - MCUXpresso IDE plugin - LpcFw_phExHif - LpcFw_phExPos 6 Mandatory materials (not included) ==================================== - MCUXpresso IDE as described on the the web site: http://www.nxp.com/mcuxpresso - LPC-Link 2 extensible, stand-alone debug probe [http://www.nxp.com/products/reference-designs/lpc-link2:OM13054] 7 Hardware Configuration ======================== Before starting this application, HW Changes may be required for the used board. Refer to the following User Manuals / Application notes before starting with this example. - UM10883: PN7462 Quick Start Guide - Customer Board + Important: See Section on "Adding PN7462AU Plugin" in that document. 8 Software Configuration ======================== - The Software can be compiled for Cortex M0 based PN7462AU from NXP. 9 Steps to follow ================= This package is distributed with the installer working on the Windows OS. After successful installation deliverables of the PN7462 are available on the hard drive: - Datasheet - Documentation - Software Steps to import SW package in MCUXpresso IDE: 1) For running this application, connect to the PN7462AU Customer demo board. 2) Create a new MCUXpresso workspace and import this project and it's dependencies: NxpNfcRdLib, PN7462AU and FreeRTOS_Library needs to be imported Note: by default all those projects are imported automatically. 3) Ensure MCU Type in "Project Properties" --> "C/C++ Build" --> "MCU Settings" for this project and its dependencies as listed in Step-2 is set Correctly: For PN7462AU: PN74xxxx --> PN7462AU-C3-00 Note: by default all projects are configured to PN7462. 4) Ensure Build Configuration for this project is selected correctly. Where allowed, set the build configuration of dependent projects also. For PN7462AU: DebugPN7462AU / ReleasePN7462AU 5) Please ensure that ph_NxpBuild_App.h is updated as per the selection of the IC and Platform. e.g. For LPC1769, NXPBUILD__PH_LPC1769 needs to be enabled, and NXPBUILD__PH_LPC11U68, NXPBUILD__PHHAL_HW_PN7462AU, etc. needs to be disabled. Similarly, for NXPBUILD__PHHAL_HW_PN5180, NXPBUILD__PHHAL_HW_PN7462AU, NXPBUILD__PHHAL_HW_RC523 needs to be disabled. Similar change is needed when switching to other supported Board/IC as listed in Section-10 6) Build the project. 7) Start the "Debug" session of IDE which will first flash the executable and start the task. 8) When this application is running on the target MCU setup and when you bring the NFC cards or phone in proximity, the example application will detect and reports the NFC technology types detected. 10 List of supported NFC Reader Boards/ICs ========================================== 1) PN7462AU Customer Evaluation Board --------------------------------------------------------------------------- For updates of this example, see [http://www.nxp.com/pages/:NFC-READER-LIBRARY] 11. Revision History ==================== 05.07.01 - PN7462 iAR and Keil project are updated 05.07.00 - PN5180 HAL Optimization HAL Exchange Optimization: HAL PN5180 was optimized to reduce EMVCo Transaction time by reducing number of BAL Exchanges with PN5180 FE which are not required for EMVCo Transaction. Inventory Read and Inventory Page Read Error: When multiple SLIX (ISO15693) card are placed in the field, PN5180 fails to detect the collision when Inventory Read and Inventory Page Read commands are sent, as PN5180 returns Timeout instead of Collision error. HAL PN5180 error check logic is changed to give preference to Collision error over Integrity error. Poll Guard Time Optimization: Poll guard time optimization was done in NFC Reader Library generically to meet EMVCo Poll guard time requirement on different platforms (Host Microcontroller + NXP FE’s) with constant guard time values. As the Poll guard time was made constant across Platforms, when PN5180 is used in Linux environment with i.MX6-UL or similar controller, EMVCo Poll guard time test cases are inconsistent. Instead of using CLIF timer, DAL timer is used to wait for Poll guard time to expire before sending Poll command. - Discovery Loop EMVCo polling loop is optimized by moving generic code that needs to be executed first time, instead of executing in a loop. Also, the FDT of HLTA is been considered while configuring GTB before sending WupB command. - PAL 15693 FDT configuration did not consider the ASK configuration of HAL. PAL 15693 is now updated to configure FDT based on the ASK configuration of HAL as per ISO15693 Specification. 05.02.01 - USB Supend mode updated - EEPROM building scripts updated 05.02.00 – OSAL update OSAL can now be used as an independent library and is not coupled with NFC Reader Library, which enables the use of OSAL in systems which may or may not use NFC Reader Library. If any other system (ex: mPOS, Secure Card Reader) where NFC Reader Library is optional and is using OSAL for OS abstraction, then there is no overhead in the integration of NFC Reader Library within the system. After OSAL changes, if the customer needs to port NFC Reader Library on any other RTOS or different different controller then NFC Reader Library does not need to be changed any more but only changes are required in OSAL which is outside NFC Reader Library which makes porting easier than before without the need of changing NFC Reader Library code base. – DAL (Driver Abstraction Layer): DAL provides API’s to abstract Microcontroller GPIO functionalities like configuring a pin to input/output/interrupt, reading and writing to pins. DAL also provides generic BAL abstraction layer required for NFC Reader Library. If NFC Reader Library needs to be ported on any other Host Microcontroller or Microcontroller SDK then NFC Reader Library need not be changed but changes are only required to be done in DAL. - PN5180 Digital Delay: NFC Reader Library PN5180 HAL will read the FW version of PN5180 during HAL initialization and uses this FW version information to either apply digital delay inside HAL of NFC Reader Library or PN5180 FW. On PN5180 firmwrae version 3.6 and below the digital delay is applied by host software (NFC Reader Library), on firmware version 3.8 and newer the digital delay is applied by PN5180 firmware. - AL ICode component updated - AL ICode DNA component added - Type 5 Tag support updated - Polling guard time setting fixed 4.06.00 - CLRC663 (plus) - Low Power Card Detection (LPCD) improvements Additional options are provided to configure different I/Q thresholds when LPCD Filter is enabled to choose either between stable detection with power saving (Option1) or higher detection range (Option2). - Antenna related configuration for CLRC663 (plus) is moved into separate header file - ISO18000-3 mode 3 (Icode-ILT) tag detection improved (CLRC663 (plus) only). v04.05.30: - NFC Reader Library update - updated documents to previous version v04.05.00: - new PN7462AU FW: "PN7462AU-FW_v04.050.03_20161010-Extended.zip" - updated documents to previous version v04.03.02: - new PN7462AU FW: "PN7462AU-FW_v04.05.00_20161010-Extended.zip" - updated documents
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.