stanback / xt_nat

Full Cone NAT module for Linux iptables

xt_NAT

Description

This Full Cone NAT xtables module was developed as a replace for the conntrack NAT to provide Assymetric NAT features on Linux systems that can be used as a Carrier Grade NAT in small ISP networks.

It allows to have 40Gbps NAT on commodity servers like 2*Xeon E5-2698 v3 @ 2.30GHz (2 x 16 Cores) with Intel X710/XL710/X540 10G adapters.

Compatibility tested with Linux Kernel 3.18 and 4.1

Features

• PAT/NAPT work mode - translates many users into a single NAT IP
• Assymetric (Full Cone) NAT - allows inbound connections from any source IP address and any source port, as long as the NAT rule exists
• Support of TCP/UDP/ICMP/Generic IP protocols
• IP Pooling Paired mode - the same NAT IP is used for all sessions of a subscriber
• Endpoint Independent Mapping - the same NAT_IP:NAT_Port mapping is used for traffic sent from same subscriber IP address and port to any external IP address and port
• Hairpinning - allows communication between two internal subscribers or internal hosts using the NAT IP
• User quotas support. Default value is 1000 max connections for each user (for each protocol independly)
• No ALGs for FTP/SIP/PPTP are implemented
• NAT events export using Netflow v5
• NAT statistics via /proc interface

Installation

$ make
$ sudo make install
$ sudo depmod -a

Usage

NAT functionality

• Define NAT Pool for the xt_NAT module:

$ sudo modprobe xt_NAT nat_pool=<Start IP>-<End IP>

• Disable conntrack for the traffic that handled by the xt_NAT module:

$ sudo iptables -t raw -A PREROUTING -s <Users Net> -j CT --notrack
$ sudo iptables -t raw -A PREROUTING -d <NAT Pool Net> -j CT --notrack

• Add iptables rule to use xt_NAT module for User's traffic (from Internet to Users):

$ sudo iptables -t raw -A PREROUTING -d <NAT Pool Net>  -j NAT --dnat
$ sudo iptables -A FORWARD -d <Users Net> -i <Uplink iface> -o <Downlink iface> -j ACCEPT

• Add iptables rule to use xt_NAT module for User's traffic (from Internet to Users):

$ sudo iptables -A FORWARD -s <Users Net> -i <Downlink iface> -o <Uplink iface> -j NAT –snat

NAT Events Export

Just add nf_dest option with a list of the Netflow v5 collectors to the xt_NAT module parameters:

$ sudo modprobe xt_NAT nat_pool=<Start IP>-<End IP> nf_dest=127.0.0.1:2055

NAT Statistics

NAT statistics are available via the /proc/net/NAT/* directory:

• /proc/net/NAT/sessions - NAT sessions for all users
• /proc/net/NAT/users - NAT users with their NAT IPs
• /proc/net/NAT/statistics - internal counters