--2022.01.25 this is for Seeed reComputer Jetson Version product
this is used for Jetson final product testing
auto_csi -> CAM0 & CAM1
auto_debug -> Micro USB port
auto_iperf -> eth0 speed
auto_usb -> Just found usb devices
auto_usb_speed -> USB write & read speed
auto_camera -> take vidio by 2pcs csi
auto_gpio -> test pi header
auto_gpio_key -> test PCIe E Key gpio
factory_test -> run all the function test
v4l2_test -> camara test tool
boot_from_usb -> modify /boot/extlinux/extlinux.conf for booting from usb
t -> factory operator using
python3:
aliyun upload
eeprom write
log file save at oss2 bucket: recomputerjetsonlituo
#40Pin Header GPIO No
75,78 74,77 216,51 50,168 14,20 194,19, 16,13 17,15 18,232 76,79 149,49 200,48 38,12
#40Pin Header GPIO testing Header
3-40, 5-38, 7-36, 11-32, 13-26, 15-24, 19-22, 21-18, 23-16, 29-10, 35-12, 31-8, 33-37
#Enable eeprom steps
mkdir /lib/modules/4.9.253-tegra/extra
cp drivers/misc/eeprom/at24.ko /lib/modules/4.9.253-tegra/extra
cp drivers/misc/mods/mods.ko /lib/modules/4.9.253-tegra/extra
cp drivers/nvmem/nvmem_core.ko /lib/modules/4.9.253-tegra/extra
depmod -a
cp drivers/jetson-sdmmc-overlay.dtbo /boot
cd /boot
sudo /opt/nvidia/jetson-io/config-by-hardware.py -n "reComputer sdmmc"