thebasti0n / ruuvi.gateway_nrf.zephyr

Ruuvi Gateway BLE scanner based on Zephyr OS

ruuvi.gateway_nrf.zephyr

Ruuvi Gateway BLE scanner based on Zephyr OS

This has been tested and built usig Zephyr OS v2.2.99.

Installation instructions for preparing Zephyr OS can be found at: https://docs.zephyrproject.org/latest/getting_started/index.html

Cloning and building

This assumes that you are running linux and followed the instructions found at the link above and cloned zephyr into ~/zephyrproject.

cd ~/zephyrproject/zephyr
mkdir applications && cd applications
git clone https://github.com/theBASTI0N/ruuvi.gateway_nrf.zephyr.git
cd ruuvi.gateway_nrf.zephyr
west build

ruuvi.gateway_nrf.zephyr's Issues

Bootloader

Add MCUboot fucntionality.

The bootloader would be enabled via a UART message allowing a user to perform an update over:

• BLE
• UART (if possible): this would require the ESP32 to be able to receive and push an update to the NRF chip

Stop/Start Scan commands

Add stop/start UART commands.

When stopped go into low power mode.