This product intends to provide those who don't have a numpad on his keyboard with a tool to use number keys on the numpad. When you execute this product, a dialog will appear on the screen. You can choose different keys to substitute the keys on the numpad, and then click the 'OK' button to confirm. Remember that one key can substitute ONLY ONE key on the numpad, or a message box will warn you that you can't do this. And after you confirm your choice, you can still change your choice by click the 'Modify' button. If everything goes well, a message box will tell you the operations have all succeeded.
This product runs on Windows 10 well, but hasn't tested on other Windows OSs.
To get this product, you have two options.
The source is just in this GitHub repository.
To build this project, you should use MSVC 19.28 or more, and set /std:c++17
option.
After building it on Release mode, execute ReleaseProduct.cmd
or ReleaseProduct(x64).cmd
to release the product. And the product will appear in the "Numpad Transformer Product" file folder or "Numpad Transformer Product (x64)" file folder.
The release version has been uploaded into the cloud. You can enter https://cloud.tsinghua.edu.cn/d/c3f9c9afac254a9d8139/ to download the release version.
本产品旨在为没有小键盘的用户提供一个使用小键盘上的数字键的工具。当运行本产品时,一个对话框将会出现在屏幕上。你可以选择不同的按键来代表小键盘的按键,然后按下“OK”按钮确认。需要记住的是,一个键只能替代一个小键盘上的键,否则将会弹出一个消息框警告你不能这么做。在你确认你的选择之后,你仍然可以按“Modify”按钮来更改。如果一切运行良好,会有一个消息框告诉你一切操作执行成功。
本产品在 Windows 10 系统上运行良好,但是在其他的 Windows 系统上并没有测试过。
获取本产品有两种方式。
如果要生成这个项目,你应该使用 MSVC 19.28 以上版本,并设置 /std:c++17
选项。
在 Release 模式下生成之后,运行 ReleaseProduct.cmd
或 ReleaseProduct(x64).cmd
来发布产品,然后产品便会出现在“Numpad Transformer Product”或“Numpad Transformer Product (x64)”文件夹内。
发行版已经上传到云端。你可以进入网站 https://cloud.tsinghua.edu.cn/d/c3f9c9afac254a9d8139/ 来下载发行版。