Topic: victron Goto Github
Some thing interesting about victron
Some thing interesting about victron
victron,Use, monitor and control any battery brand with any inverter! Application to read and monitor data from BMSes and write data to an inverter using any protocol (e.g. UART, RS485, ModBus or CAN)
User: ai-republic
Home Page: https://github.com/ai-republic/bms-to-inverter
victron,Integrate Fronius Smart meter into Victron Energies Venus OS
User: ayasystems
victron,Opensource hardware and software solutions for sailing and sailboats
Organization: bareboat-necessities
victron,Emergency solar system with grid switching in case of insufficient solar energy.
User: bastelschlumpf
victron,Victron bluetooth and serial communication at a python script. With MQTT and HomeAssistant support.
User: birdie1
victron,Shell script that manages Victron Venus OS ESS-Systems and/or Shelly Plug S and/or AVM Fritz!DECT200 and 210 switchable sockets so that it charges/switches, when spot-market prices are low.
User: christian1980nrw
victron,Collects data from your Victron SmartSolar MPPT and sends it to InfluxDB
User: docbrown101
victron,Integrate Shelly 3EM smart meter into Victron Energies Venus OS
User: fabian-lauer
victron,Use official Victron BLE endpoint for fetching data from Victron devices via Bluetooth LE via ESPHome.
User: fabian-schmidt
victron,Home Automation programs for my self-sufficient house
User: hywan
Home Page: https://lamaisonvivante.blog/
victron,VE.Direct to InfluxDB for Raspberry Pi
User: jessedc
victron,Ant Bms decoding / encoding and transfer to Venus Gx, Cerbo, bbb ect for Ve.Can input. (CAN protocol according to RecBms, BYD, LG ect)
User: juworkshop
victron,Integrate Open_EVSE charger into Victron Energies Venus OS
User: juworkshop
victron,A customizable Home Assistant power flow card to supervise/monitor and operate a solar installation, inverter (victron, axpet, wks, .....), heating, ev charge and more..
User: juworkshop
victron,Home Assistant plug-in for Victron Instant Readout compatible devices
User: keshavdv
victron,Victron Mppt charger ve.direct to esphome node
User: kindr007
victron,SmartShunt ve.direct to ESPHOME node
User: kindr007
victron,Publish serial data from ve.direct to an MQTT broker
User: metrafonic
victron,This script allows you to backup your Raspberry Pi to a SMB/CIFS share on a NAS/computer without removing the SD card.
User: mr-manuel
victron,This Venus OS driver gets the data from the Enphase Envoy-S and displays it as PV Inverter. It works for all phase combinations. Additionally it's possible to post the data to multiple MQTT topics to get more detailed informations/monitoring for the Enphase system and single inverters.
User: mr-manuel
victron,This Venus OS driver gets the data from MQTT and displays it as battery.
User: mr-manuel
victron,This Venus OS driver gets the data from MQTT and displays it as EV charger.
User: mr-manuel
victron,This Venus OS driver gets the data from MQTT and displays it as grid, genset or ac load meter.
User: mr-manuel
victron,This Venus OS driver gets the data from MQTT and displays it as pv inverter.
User: mr-manuel
victron,This Venus OS driver gets the data from MQTT and displays it as solar charger.
User: mr-manuel
victron,This Venus OS driver gets the data from MQTT and displays it as temperature sensor.
User: mr-manuel
victron,This Venus OS driver emulates a MultiPlus-II in order to see the right AC load and flow, if you have the MQTT PV, Grid and Battery drivers but no MultiPlus-II.
User: mr-manuel
victron,This driver/package allows you to use ngrok on Venus OS and configure it over GUI. Ngrok allows you to access a specific port without forwarding the port.
User: mr-manuel
victron,DIY CAN BMS emulator project to integrate DIY battery with different brands of invertors with CAN or RS485 communication.
User: mrconstantin
victron,Code to read the VE.Direct-Protocol from serial into a value array. Uses a non-blocking read loop and does checksum verification before adding the data.
Organization: physee
victron,Zero Export Script for Hoymiles Inverters using AhoyDTU / OpenDTU and Tasmota Smart Meter inferface / Shelly 3EM / SHRDZM / Emlog / ioBroker
User: reserve85
victron,Integration for Home Assistant to fetch data from the victron gx device via modbusTCP
User: sfstar
victron,Integration of Fronius Smartmeters into the Victron VenusOS environment via dbus
User: siruli
victron,Little Program for ESP82XX to get the Victron data to web and MQTT
User: softwarecrash
victron,Integrate Hoymiles microinverter into Victron Energies Venus OS
User: telekatz
victron,Integrate Shelly single phase energy meters into Victron Energies Venus OS
User: telekatz
victron,Victron BlueSmart IP22 Charger ve.direct interface
User: wasn-eu
Home Page: https://www.wasn.eu
victron,Experimental tool to interact with Victron VE.Bus devices
User: yvesf
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.