View Code? Open in Web Editor
NEW
This project forked from locikll/openwrt-for-tl-wr802nv4
OpenWRT source/release build for Tplink-WR802N v4
License: MIT License
Makefile 6.78%
Shell 15.28%
Lua 77.94%
openwrt-for-tl-wr802nv4's Introduction
Instructions for Flashing OpenWRT on a TL-WR802Nv4
- Build/Download (from releases section) the sysupgrade and recovery binary images, rename the recovery binary to tp_recovery.bin
- Install TFTP server such as Tftpd64
- Connect to your TL-WR802Nv4 to your PC via Ethernet, and change your local IP address to 192.168.0.66
- Launch the TFTP server and route to 192.168.0.66, with the directory where your recovery binary image is saved as tp_recovery.bin
- Hold down the reset button on the router for ~ 10 seconds
- Congratulations, it should now be flashed and you can connect to it via 192.168.1.1 AFTER changing back your local IP to 192.168.1.x or 'automatic'
openwrt-for-tl-wr802nv4's People
Contributors