vshymanskyy / w600tool

Firmware upload tool for Winner Micro W600 & W601 WiFi

w600tool

Firmware upload tool for Winner Micro W600 & W601 WiFi

Works on: Linux, Windows, MacOS

Prebuilt Windows executable file is available here

Features

• Automatically detects bootloader or helps entering secboot
• Get/Set MAC address
• Erase secboot and image
• Switch to high-speed mode
• Upload fls, img files

Usage

usage: w600tool.py [-h] [-p PORT] [-b BAUD] [--get-mac] [--set-mac MAC] [-e]
                   [-u FILE]
                   [--upload-baud {115200,460800,921600,1000000,2000000}]

optional arguments:
  -h, --help            show this help message and exit
  -p PORT, --port PORT
  -b BAUD, --baud BAUD
  --get-mac
  --set-mac MAC
  -e, --erase
  -u FILE, --upload FILE
  --upload-baud {115200,460800,921600,1000000,2000000}

Example

$ python3 ./w600tool.py --upload fw/W60X_MicroPython_1.10_B1.1_GZ.img
Push reset button to enter bootloader...
Switched speed to 1000000
Uploading fw/W60X_MicroPython_1.10_B1.1_GZ.img
0% [##############################] 100% | ETA: 00:00:00
Total time elapsed: 00:00:09
Reset board to run user code...

w600tool's Issues

Error: uploading FLS

I was able to upload *.img successfully. But micropython shell was not started. I think I have to burn *.fls first to make it work. But I am getting the following error:

$ python3 w600tool-master/w600tool.py -p /dev/tty.wchusbserial1410 --upload W60X_MicroPython_1.10_B1.5_img/1M_Flash/wm_w600.fls

Opening device: /dev/tty.wchusbserial1410
Erasing secboot
Error: Erasing secboot failed => Try entering ROM boot manually

PS: I am using Air602 WiFi Development Board from Seeed and I do not think there is a way to initiate ROM boot manually.

non working

Traceback (most recent call last): File "w600tool.py", line 166, in <module> File "w600tool.py", line 157, in getDefaultPort NameError: name 'platform' is not defined [12004] Failed to execute script w600tool

any ideas?

TypeError: 'generator' object is not subscriptable

Checked out the master branch, and when running python w600tool.py I get the following error.

Traceback (most recent call last):
  File "w600tool.py", line 171, in <module>
    parser.add_argument('-p', '--port',   default=getDefaultPort())
  File "w600tool.py", line 160, in getDefaultPort
    return comlist[0].device;
TypeError: 'generator' object is not subscriptable

installed python and libraries:
Python 3.8.6
w600tool 1.1.0
pyserial 3.0.1