Comments (31)
For my side, there are two issues when use Apple CarPlay
- Wheel buttons next/previous button not working
- When exit the autokit and enter again the app will freeze, and failed to connect the dongle Bluetooth, need unplug and plug again to back to normal
btw I’m using ccpa dongle.
from proton-x50-apk-installer-atlas.
For my side, there are two issues when use Apple CarPlay
- Wheel buttons next/previous button not working
- When exit the autokit and enter again the app will freeze, and failed to connect the dongle Bluetooth, need unplug and plug again to back to normal
btw I’m using ccpa dongle.
For issue no. 2
Disconnect the phone first.
Could you go to:
Setting... left top screen.
Click "Hardware" words right top screen.
Perform the auto detection.
Then back to previous menu.. then
- Change to highest resolution available
- Change to 60fps - For fun.. Why not
Then go to Advance setting.
Change the render from Other to Default
Then set Autoplay Music to "No"
Now test it out.
For music... use the HU build music... like Joox... Syok... Normal radio... and try to "next" & "Previous" using steering button
See if it still freeze. When you reverse or give signal..
Regards
Notes* Can always reset to factory setting in the Advance menu.. way down before the check update button
from proton-x50-apk-installer-atlas.
For my side, there are two issues when use Apple CarPlay
- Wheel buttons next/previous button not working
- When exit the autokit and enter again the app will freeze, and failed to connect the dongle Bluetooth, need unplug and plug again to back to normal
btw I’m using ccpa dongle.
For issue no. 2
Disconnect the phone first.
Could you go to:
Setting... left top screen. Click "Hardware" words right top screen. Perform the auto detection. Then back to previous menu.. then
- Change to highest resolution available
- Change to 60fps - For fun.. Why not
Then go to Advance setting. Change the render from Other to Default Then set Autoplay Music to "No"
Now test it out.
For music... use the HU build music... like Joox... Syok... Normal radio... and try to "next" & "Previous" using steering button
See if it still freeze. When you reverse or give signal..
Regards
Notes* Can always reset to factory setting in the Advance menu.. way down before the check update button
It’s work but the CarPlay will become a bit laggy when change the render mode to default
from proton-x50-apk-installer-atlas.
@jctang1028 I have put up the workaround for steering button in this docs. README updated too. As long as mobile phone connected via BT, track switching should not be an issue with the workaround.
Since BT only used for track switching, I think audio channel not neccessary needed to change to Bluetooth? Feel free to try as I am not able to verify this behaviour. :(
I tried to change the audio channel to “box” but the steering button won’t work, but when I switched to Bluetooth it’s work for steering button
from proton-x50-apk-installer-atlas.
@jctang1028 if I understand your statement correctly, those are the settings to avoid Autokit freeze up after switch between apps.
I am also creating another page to summarize "Recommended Settings", if my assumption were true, I believe those can be added in said page. 🤔
Yes
“Audio channel” and “autoplay music” setting to able use wheel steering button when switching song via bt
“Render mode” setting to avoid app freeze when switch app
“Fps” setting so the CarPlay can run smoothly avoid laggy
from proton-x50-apk-installer-atlas.
Hi, the ordinary way to install app would not works in ATLAS, thus update failed.
As Android user myself, I can't test the scenario.
Do you get any options to skip the update or disable update check?
from proton-x50-apk-installer-atlas.
Hi, the ordinary way to install app would not works in ATLAS, thus update failed. As Android user myself, I can't test the scenario. Do you get any options to skip the update or disable update check?
If you did not do the update, the LINKIT app will say "Please insert device" forever.
Thus, the 6 steps workaround I provided.
Maybe you can include the workaround in your readme.md for all the iPhone users
from proton-x50-apk-installer-atlas.
I think I hit the same issue on my GKUI last time. The app is stuck at "Please insert device" forever. The connection to the LINKIT's Bluetooth and wifi keep disconnecting. After that, I saw someone in the X50 community FB group suggest installing the older version of the app. I installed version 2021 and it works fantastically. Hopefully, this can help in your case.
from proton-x50-apk-installer-atlas.
from proton-x50-apk-installer-atlas.
Hi, i have confirmed with a few others who utilized the script and installed autokit, no issue even without updates.
I suspect it might be due to issue with installation.
Could you please share the log file in this issue?
It's in the root of your USB drive with file name "outputInstall_xxx.txt".
from proton-x50-apk-installer-atlas.
I am facing the similar issue as @nukm4n but mine is worse. I could never start my carplay with CARLINKIT, it just always stuck in "Please insert device" stage. I had this issue previously even in GKUI after I updated my carplay dongle through the app, not sure whether is that the reason why it broke the dongle.
Hi, i have confirmed with a few others who utilized the script and installed autokit, no issue even without updates. I suspect it might be due to issue with installation. Could you please share the log file in this issue? It's in the root of your USB drive with file name "outputInstall_xxx.txt".
Could you ask/share which model of the dongle that they are using that are working properly?
According to the logs, it looks okay except unable to start one of the Intent where I don't think should be the issue.
outputInstall_1676425797.txt
Update:
There's three type of carkit dongle, CCPM(WIRED), CCPW & CCPA (WIRELESS).
Carlinkit.com
What I have is CCPW, which is the one not working currently. Just ordered CCPA dongle, will update whether it works or not once I receive it.
from proton-x50-apk-installer-atlas.
I am facing the similar issue as @nukm4n but mine is worse. I could never start my carplay with CARLINKIT, it just always stuck in "Please insert device" stage. I had this issue previously even in GKUI after I updated my carplay dongle through the app, not sure whether is that the reason why it broke the dongle.
Hi, i have confirmed with a few others who utilized the script and installed autokit, no issue even without updates. I suspect it might be due to issue with installation. Could you please share the log file in this issue? It's in the root of your USB drive with file name "outputInstall_xxx.txt".
Could you ask/share which model of the dongle that they are using that are working properly? According to the logs, it looks okay except unable to start one of the Intent where I don't think should be the issue. outputInstall_1676425797.txt
Update: There's three type of carkit dongle, CCPM(WIRED), CCPW & CCPA (WIRELESS). Carlinkit.com What I have is CCPW, which is the one not working currently. Just ordered CCPA dongle, will update whether it works or not once I receive it.
Unlike nukm4n, your issue seems to be relevant to carlinkit device.
Please let me know if CCPA behave differently.
from proton-x50-apk-installer-atlas.
These notes obsolete now. Keeping for records
Notes - I'm not using Xeon script.
Hi, just my input. 2 issues when sideload apk version ending with AutoKit_2022.06.27.1555.apk in AtlasOS
When plug AutoKit wired or wireless (I own both), the the installed APK will ask the box to be upgraded. AtlasOS able to upgrade the box firmware. Then when the box has higher firmware... the box wants AutoKit_2022.06.27.1555.apk to be upgraded AutoKit_2022.08.18.1707.apk.
This is where the behavior seen as, when trying to update ... ArlasOs said it failed... but the autokit now magically working
Then when the head unit powered down... and back up... the autokit will not work and the ""failure"" update steps have to be performed again.
This AutoKit_2022.08.18.1707.apk is not easy to find
1. Have to get by staging a download from another HU that allow the file to be copied out. tested working
2. Download from XDA site with the recent post this year. tested working also.
And I cannot test using Xeon script because when I try to change something. the script won't run, or I bad at copy pasting or I sucks at it
from proton-x50-apk-installer-atlas.
Disclaimer:
X50 Flagship
Hardware 300
AtlasOS latest
Execuse the typos and English.
Try this
Run the ATLAS_617_618_uninstall script. Reason being the script does not allow to uninstall an app... so have to nuke everything.
Then replace this file ATLAS_617_618_install\app\hutroops.cn.manstep.phonemirrorBox\cn.manstep.phonemirrorBox.apk with official apk - https://www.carlinkit.com/download.html My case - Applicable products:CCPM、CCPW、CCPA - AutoKit_2022.11.15.1535.apk
For compatibility of the future script... rename the AutoKit_2022.11.15.1535.apk to cn.manstep.phonemirrorBox.apk
Then run back the ATLAS_617_618_install script.
Issue -
Only 1 detected. During carplay... if you switch back to head unit app... let say you wanna see you car milage. then switch back to Carlink kit app.... the display will freeze. Audio will work... could be my box issue... maybe cap ayam
Futher checking.
For wireless Carlink kit... somehow... the Bluetooth failed to reconnect back when the app is in suspend mode.... work around... is to unplug the device and plug back... so it kind of defeat the user experience. Some more the box is way down.
My workaround
In my case I use my wired box... when I accidently have this freeze issue, I just unplug the lightning cable and plug back...
Other observation
My other car fitted with factory CarPlay sometime... rarely have this frezze issue. So I do same thing... I just unplug the cable and plug back. All good. maybe may factory fitted carplay also cap ayam.
from proton-x50-apk-installer-atlas.
For my side, there are two issues when use Apple CarPlay
- Wheel buttons next/previous button not working
- When exit the autokit and enter again the app will freeze, and failed to connect the dongle Bluetooth, need unplug and plug again to back to normal
btw I’m using ccpa dongle.
For issue no. 2
Disconnect the phone first.
Could you go to:
Setting... left top screen. Click "Hardware" words right top screen. Perform the auto detection. Then back to previous menu.. then
- Change to highest resolution available
- Change to 60fps - For fun.. Why not
Then go to Advance setting. Change the render from Other to Default Then set Autoplay Music to "No"
Now test it out.
For music... use the HU build music... like Joox... Syok... Normal radio... and try to "next" & "Previous" using steering button
See if it still freeze. When you reverse or give signal..
Regards
Notes* Can always reset to factory setting in the Advance menu.. way down before the check update buttonIt’s work but the CarPlay will become a bit laggy when change the render mode to default
Maybe lower back the FPS to 25. If that help.
Nothing much can be done after that.
Now, focusing on seeing if possible, to get the stereng button works. Heard someone on GKUI has it work... Need the Autokit version to see the diff.
But not going to spend much time as I'm coming from Gen2 without stereng button to x50... and not able to use stereng button... so no big diff for me.
from proton-x50-apk-installer-atlas.
I found a prefect way (not prefect but at least can work smoothly) to solve two issues that I said, thank you @sunspiider for sharing cuz I follow his solution plus one more setting so the CarPlay won’t freezing and also able to use wheel steering button to next/previous song
Go to setting on left top screen (don’t connect CarPlay first)
- FPS change to 25
then go to advance setting
2. Render mode change to “default“
3. Audio channel change to “Bluetooth”
4. Auto play music change to “Off”
Then make sure your iPhone connect to ihu Bluetooth so you can use wheel steering button during use Apple CarPlay and Apple CarPlay won’t freezing even u leave the app and enter again
from proton-x50-apk-installer-atlas.
@jctang1028 I have put up the workaround for steering button in this docs.
README updated too.
As long as mobile phone connected via BT, track switching should not be an issue with the workaround.
Since BT only used for track switching, I think audio channel not neccessary needed to change to Bluetooth?
Feel free to try as I am not able to verify this behaviour. :(
from proton-x50-apk-installer-atlas.
Good to know. I will include these info as remark. Thanks for the heads up!
from proton-x50-apk-installer-atlas.
Good to know. I will include these info as remark. Thanks for the heads up!
Welcome bro. And the fps, render mode and autoplay music need to remark too cuz the default setting is different
those setting is to ensure autokit won’t freeze and wheel button can function well
from proton-x50-apk-installer-atlas.
@jctang1028 if I understand your statement correctly, those are the settings to avoid Autokit freeze up after switch between apps.
I am also creating another page to summarize "Recommended Settings", if my assumption were true, I believe those can be added in said page. 🤔
from proton-x50-apk-installer-atlas.
@jctang1028 if I understand your statement correctly, those are the settings to avoid Autokit freeze up after switch between apps.
I am also creating another page to summarize "Recommended Settings", if my assumption were true, I believe those can be added in said page. 🤔Yes “Audio channel” and “autoplay music” setting to able use wheel steering button when switching song via bt “Render mode” setting to avoid app freeze when switch app “Fps” setting so the CarPlay can run smoothly avoid laggy
To be confrom, we are updating the steps for standard xeon APK.. not the version I use right?
Autokit 2022.06.27.1555 (xeon script) vs AutoKit_2022.11.15.1535.apk (official website). I assume this fix @nukm4n issue.
from proton-x50-apk-installer-atlas.
@jctang1028 if I understand your statement correctly, those are the settings to avoid Autokit freeze up after switch between apps.
I am also creating another page to summarize "Recommended Settings", if my assumption were true, I believe those can be added in said page. 🤔Yes “Audio channel” and “autoplay music” setting to able use wheel steering button when switching song via bt “Render mode” setting to avoid app freeze when switch app “Fps” setting so the CarPlay can run smoothly avoid laggy
To be confrom, we are updating the steps for standard xeon APK.. not the version I use right?
Autokit 2022.06.27.1555 (xeon script) vs AutoKit_2022.11.15.1535.apk (official website). I assume this fix @nukm4n issue.
Since your autokit is latest version and also have freeze app issue, are you apply the same setting that u told to solve the app freeze issue? If yes I think both version of autokit also work that recommended setting
from proton-x50-apk-installer-atlas.
Please insert device
I had 3 issues
- Please insert device - Forever asking - Fixed by using Autokit latest
- Freeze issue - Fixed by choosing diff render
- Stereng buttons - Will try your workaround on the latest autokit soon. Will test wired and wireless.
from proton-x50-apk-installer-atlas.
Update:
Got my CCPA dongle few days ago but no chance of driving long distance. All looks good for short drive, connect flawlessly everytime.
25 Feb Update:
My carlink freeze twice today after a long drive need to unplug dongle n plug back. Didn't got the chance to try different settings and update the autokit 2022.11 version. Will update it and test again
from proton-x50-apk-installer-atlas.
yesterday i updated installation script to have 2022.11 autokit.
Feel free to give it a try see if any issue.
from proton-x50-apk-installer-atlas.
Both autokit version can use same recommended setting
But I suggest install autokit 2022.11 cuz the version is up to date
from proton-x50-apk-installer-atlas.
from proton-x50-apk-installer-atlas.
Issue no 2 Same thing happen to me. Need to unplugged dongle and plug in again.
Have you tried this recommendation?
- Render mode change to “default“
from proton-x50-apk-installer-atlas.
CarPlay issue update: (after apply recommended setting and installed 2022.11 version)
- Short drive run flawlessly
- Long drive (around 30minutes) CarPlay will freeze
Remark:
- Ccpa carlinkit dongle
- tested in wireless , will try for wired
from proton-x50-apk-installer-atlas.
CarPlay issue update: (after apply recommended setting and installed 2022.11 version)
- Short drive run flawlessly
- Long drive (around 30minutes) CarPlay will freeze
Remark:
- Ccpa carlinkit dongle
- tested in wireless , will try for wired
Question
Are you going to test with a diff wired dongle or the same dongle but plug wire into it .. because my wireless have cable option.
Remarks
- Hours drive (around 2 hours jem) seem no problem with this CCPM - The yellow package.
- About every 30 mins drive with CCPA - The audio chocked... but never try more than 2 hours drive yet
- For x50 FS, I lowed down the resolution to lowest as if I use higher resolution ... icon seem to be very small for my fat finger.
from proton-x50-apk-installer-atlas.
CarPlay issue update: (after apply recommended setting and installed 2022.11 version)
- Short drive run flawlessly
- Long drive (around 30minutes) CarPlay will freeze
Remark:
- Ccpa carlinkit dongle
- tested in wireless , will try for wired
Question Are you going to test with a diff wired dongle or the same dongle but plug wire into it .. because my wireless have cable option.
Remarks
- Hours drive (around 2 hours jem) seem no problem with this CCPM - The yellow package.
- About every 30 mins drive with CCPA - The audio chocked... but never try more than 2 hours drive yet
- For x50 FS, I lowed down the resolution to lowest as if I use higher resolution ... icon seem to be very small for my fat finger.
Will use same dongle, CCPA can wireless and wired
from proton-x50-apk-installer-atlas.
Related Issues (20)
- Andriod Auto Alert keep poping up HOT 2
- Not installed for this user HOT 7
- Query for installing atlas HOT 1
- X90 carkit apk HOT 1
- Good news for Autokit HOT 8
- HUR and Carlinkit Dongle for Android Auto HOT 2
- Script doesn't run when the USB is plugged into x50 IHU HOT 2
- Apple Carplay with iOS Update 17.4
- Not working on geely coolray 2024 HOT 2
- S70 @ X90 IHU HOT 2
- Can help on S70 Atlas ? HOT 1
- Waze location service not found HOT 1
- S70 guide HOT 13
- Verification failed when try to downgrade from 644 to 617 HOT 3
- Car launcher notification HOT 1
- Can it use on S70? HOT 2
- Few custom app to uninstall HOT 2
- Uninstall specific app script HOT 3
- Atlas X50 RC not running HOT 3
- Newpipe showing network error HOT 2
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from proton-x50-apk-installer-atlas.