THE SAME AS THIS: It doesn't show any labels at all. I am using Cura 5.2.1 in Windows 10.
The buttons and comboboxes still work, of course, but I had a brief moment of confusion when I installed this and tried it for the first time.
NOT SEE IN WHITH BLACK OR WHITE THEME

When I apply the settings for optimal support removal there are also changes made to Retraction Distance and Retraction Speed.
In my understanding such settings should only be changed if "Set standard settings" is checked.

After playing with UCS for a while I got to a configuration that was printing seriously ugly. Under Extrusion like crazy. There was no way to "back out" or "undo". Tried pulling in a "default" profile to reset my custom profile but it still was miss-behaving.

I switched slicers to double check it wasn't wet filament or something on the printer, and the other slicer worked fine. Went through ALL the settings AGAIN and couldn't find anything. Had this happen before without UCS and had to do a clean re-install, ie delete the WinData stuff as well and rebuild my profiles from scratch.

Need a way to get the WHOLE application back to a known state, ie a profile "RESET".

just deleting a profile doesn't seem to delete/reset everything. Some associated things in the printer and system options seem to stay, and I think somewhere in there is where my system got corrupted.

My everyday printing nozzle size is a .5 on most of my printers. I don't feel like every odd number nozzle is necessary, even though would be ideal. But you should at least add .5 and .3 because they are the closest options to the most common .4

Also enjoy your settings, most applies to most printers. I have some rep rap mostly 3d printed printers that your accel and jerk settings are not ideal for, but I assume anyone building a printer like that are going to understand how to run test to find ideal settings for that

If I apply the AntiWrap settings on ABS, I see that the values change, but sometimes, I run it twice or more often, than I get settings that will never work, would be good, to have a marker, that it save the current settings, before it runs and check if the changes already applied or have changed...

It's probably a long, long way off, but something I think would be a good idea is an option to specify a secondary intent that, where allowed, complements the primary intent. Like a second priority intent.

Hello,

I noticed that with Cura 4.x the line height is set, e.g. to 0.24 in mode prototyope. But in Cura 5.x it is not set anymore (and obviously some other values too, because in Cura 4.x 99 values were set, in Cura 5.x 36).

Is that on purpose or is the addon for Cura 5 still work in progress ?

Thanks for a hint!

Plugin version

• 0.15

Cura version

• 4.10
• 4.11
• 4.12

Platform

• Computer: Lenova ideaPad i7 GeForce MX230/Intel UHD Graphic 620 with external monitor
  • Using optimus to switch between graphic drivers
• Desktop: KDE
• OS: Linux 5.14.10-1-MANJARO #1 SMP PREEMPT Thu Oct 7 06:43:34 UTC 2021 x86_64 GNU/Linux

Reproduction steps

• Open dialog from Cura menu
• Try moving the dialog to another monitor

Actual result

The dialog always opens up on the "main" monitor and can't be moved

Expected result

Movable dialog between monitors.

Hi, I'm not a programmer or anything like that, I've always used your plugin, it's incredible, but now it's disappeared from the store. What happened? Can I install it other than through the Ultimaker Marketplace?

It doesn't show any labels at all. I am using Cura 5.2.1 in Windows 10.
The buttons and comboboxes still work, of course, but I had a brief moment of confusion when I installed this and tried it for the first time.

Aside from that there's a typo: it should be "unknown", not "unknow".

Two more configurations I would like to see

• Overhangs

• Surface Finish (not just ironing, external wall finishes as well...)

It would be nice to know what each configuration is adjusting so we can tweak things beyond the specific config, like when we want a small figure AND a good top layer.

Some configs may adjust up to 77 things (I think I saw that number once) to a low of 14. It would be nice to know why the difference...